A ferrite core has less eddy current loss than an iron core because?

A ferrite core has less eddy current loss than an iron core because?
by

1 Answer

Answer :

A ferrite core has less eddy current loss than an iron core because ferrites have high hysteresis.

by

Related questions

Eddy current damping cannot be used for moving iron instrument because

Description : Eddy current damping cannot be used for moving iron instrument because

Last Answer : Eddy current damping cannot be used for moving iron instrument because the presence of a permanent magnet required for such purpose would affect the deflection and hence the reading of the instrument

What is the difference between eddy current and hysteresis loss?

Description : What is the difference between eddy current and hysteresis loss?

Last Answer : Loss occurred by magnetising and demagnetising process is called histerisis loss and the current flowed due to the magnetic field produced by the electric field applied is called eddy current losses

The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density.

Description : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is :  (A) 256 W (B) 320 W (C) 500 W (D) 625 W

Last Answer : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is : 625 W

Explain hysteresis loss, eddy current loss and skin effect limitations with reference to magnetic material.

Description : Explain hysteresis loss, eddy current loss and skin effect limitations with reference to magnetic material.

Last Answer : Hysteresis loss: Hysteresis loss is a loss which occurs due to the friction of magnetic domain due to the change in magnetic field in ferromagnetic material like iron. Hysteresis loss causes power loss ... loss in transformer is given by, We=Kef2Kf2Bm2watts Skin effect limitations:

When secondary of a current transformer is open-circuited its iron core will be?

Description : When secondary of a current transformer is open-circuited its iron core will be?

Last Answer : When secondary of a current transformer is open-circuited its iron core will be hot because of heavy iron losses taking place in it due to high flux density.

Which of the following can reduce the Eddy current losses?

Description : Which of the following can reduce the Eddy current losses? A) By making the core of a stack of plates electrically insulated from each other B) By making the core of solid block C) By increasing the applied voltage  D) None of these

Last Answer : Which of the following can reduce the Eddy current losses? A) By making the core of a stack of plates electrically insulated from each other B) By making the core of solid block C) By increasing the applied voltage  D) None of these

what is eddy current ?

Description : what is eddy current ?

Last Answer : In magnetic circuits when we supply current to coil which wound on some core( of iron cast iron, ferrite ) material it produce magnetic field but there is small amount of flux which also ... heat and losses in magnetic circuits..for good working conditions we always try to minimize eddy current

Give two applications of each : 1) Eddy current sensor 2) Optical sensor.

Description : Give two applications of each : 1) Eddy current sensor 2) Optical sensor.

Last Answer : Eddy current sensor : 1. Detection of non-magnetic but conductive materials. 2. Displacement sensing 3. Position sensing Optical sensor : 1. Position Detection 2. Velocity Detection 3. Acceleration Detection 4. Direction Detection

The disc of an instrument using eddy current damping should be of?

Last Answer : The disc of an instrument using eddy current damping should be of conducting and non-magnetic material.

A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The

Description : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is

Last Answer : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is 0.707

In an actual transformer the iron loss remains practically constant from no load to full load because?

Description : In an actual transformer the iron loss remains practically constant from no load to full load because?

Last Answer : In an actual transformer the iron loss remains practically constant from no load to full load because core flux remains practically constant.

At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total

Description : At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total loss at maximum efficiency is :  (A) 7000 W (B) 6000 W (C) 8000 W (D) 4000 W

Last Answer : At full -load of a transformer, the iron loss and copper loss are 3000 W and 4000 W respectively. Then total loss at maximum efficiency is : 6000 W

If the supply frequency to the transformer is increased, the iron loss will?

Last Answer : If the supply frequency to the transformer is increased, the iron loss will increase.

Iron loss of a transformer can be measured by?

Last Answer : Iron loss of a transformer can be measured by low power factor wattmeter.

When a conductor carries more current on the surface as compared to core, it is due to?

Last Answer : When a conductor carries more current on the surface as compared to core, it is due to skin effect.

In a loss-free R-L-C circuit the transient current is?

Description : In a loss-free R-L-C circuit the transient current is?

Last Answer : In a loss-free R-L-C circuit the transient current is sinusoidal.

A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

Description : A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

Last Answer : (A) High resistance.

Eddy currents are induced in the pole shoes of a D.C. machine due to?

Description : Eddy currents are induced in the pole shoes of a D.C. machine due to?

Last Answer : Eddy currents are induced in the pole shoes of a D.C. machine due to relative rotation between field and armature.

State the material used for making (1) Magnetic Core (2) Fuse element

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Core type transformers are popular in___________.

Description : Core type transformers are popular in___________.  (A) High voltage applications (B) Low voltage applications (C) All of the above (D) None of the above

Last Answer : Core type transformers are popular in High voltage applications

A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Last Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

The main purpose of using core in a transformer is to

Description : The main purpose of using core in a transformer is to (A) decrease iron losses (B) eliminate magnetic hysteresis (C) reduce reluctance of the common magnetic circuit (D) prevent eddy current loss

Last Answer : Reduce Relucatnce of the common magnetic circuit.

Why does the core of a transformer need to be laminated?

Description : Why does the core of a transformer need to be laminated?

Last Answer : Transformer cores are laminated to reduce eddy current loss.

why the Transformer core is laminated?

Last Answer : Transformer core is laminated to reduce Eddy current losses.

State any four characteristics of core type transformer.

Description : State any four characteristics of core type transformer.

Last Answer : Characteristics of core type transformer: i) It has one window. ii) It has one magnetic circuit. iii) Core surrounds the winding. iv) Average length of core is more. v) Area of cross ... Better cooling for winding. vii) Mechnical strength is comparatively less. viii) Repair and maintenance is easy.

The core construction is like spokes of a wheel in following transformer:

Description : The core construction is like spokes of a wheel in following transformer:  (A) Berry Type Transformer (B) Core Type Transformer (C) Shell Type Transformer (D) None of the above

Last Answer : The core construction is like spokes of a wheel in following transformer:  Berry Type Transformer

The desirable properties of transformer core material are

Description : The desirable properties of transformer core material are  (1) low permeability and low hysteresis loss. (2) high permeability and high hysteresis loss. (3) high permeability and low hysteresis loss. (4) low permeability and hysteresis loss.

Last Answer : The desirable properties of transformer core material are high permeability and low hysteresis loss.

A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to

Description : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is (A) 1.125 cm (B) 1.5 cm (C ) 2 cm (D) 8 cm

Last Answer : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is 2 cm 

The armature core of a D.C. generator is usually made of?

Last Answer : The armature core of a D.C. generator is usually made of silicon steel.

Material used for construction of transformer core is usually?

Last Answer : Material used for construction of transformer core is usually silicon steel.

The size of a transformer core will depend on?

Description : The size of a transformer core will depend on?

Last Answer : The size of a transformer core will depend on frequency and area of the core.

Reduction in core losses and increase in permeability are obtained with transformer employing?

Description : Reduction in core losses and increase in permeability are obtained with transformer employing?

Last Answer : Reduction in core losses and increase in permeability are obtained with transformer employing core built-up of laminations of cold rolled grain oriented steel.

In DC generators lamination core are generally made of?

Description : In DC generators lamination core are generally made of?

Last Answer : In DC generators lamination core are generally made of silicon steel.

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

Which is the best conductor: silver, carbon, or iron?

Description : Which is the best conductor: silver, carbon, or iron?

Last Answer : Silver is the best conductor. Carbon is the semiconductor. Iron have less conductance as compared to silver.

The iron alloy, ALNICO is mainly used to make ________

Description : The iron alloy, ALNICO is mainly used to make ________ A) Temporary magnets B) Permanent magnets C) Transmission lines D) None of these

Last Answer : The iron alloy, ALNICO is mainly used to make Permanent magnets

In AC. circuits, laminated iron is invariably used in order to?

Description : In AC. circuits, laminated iron is invariably used in order to?

Last Answer : In AC. circuits, laminated iron is invariably used in order to reduce eddy current loss.

Do you iron your clothes?

Description : Do you iron your clothes?

Last Answer : Lika hail no!

Which Foods are Good Sources of Iron?

Description : Which Foods are Good Sources of Iron?

Last Answer : Google, Google and Google some more. I did this for iron rich foods just 2 days ago and there is a plethora of great information. Also, do what your Dr. told you, but I do find that slow release iron supplements (like slow-fe) are far easier on your system.

How to Clean Wrought Iron

Description : How to Clean Wrought Iron

Last Answer : How to Clean Wrought Iron Items made from wrought iron can look beautiful, grand and elegant, but it only takes a few years for them to make your house looking like a haunted house more than an elegant ... of time. Chances are, you will just have to paint over the stains to cover them up completely.

How to Iron Jeans ?

Description : How to Iron Jeans ?

Last Answer : How to Iron Jeans There's nothing like a pair of thoroughly wrinkled jeans to make one look unkempt and unhygienic. Learn how to iron your jeans properly, which will only make you look good, but it will ... can last for a week. You can also opt to iron your jeans once a week, after laundering.

How to Increase Iron in Your Diet ?

Description : How to Increase Iron in Your Diet ?

Last Answer : How to Increase Iron in Your Diet Iron is essential for the production of hemoglobin and myoglobin. These are important proteins needed in transporting oxygen throughout the body. Iron also improves ... iron sources in your diet to prevent acquiring diseases associated with low levels of iron.

How to Iron a Shirt ?

Description : How to Iron a Shirt ?

Last Answer : How to Iron a Shirt If you want to learn how to iron your own clothes, shirts are a good starting point. Shirts are typically the easiest to iron, and can be done perfectly in a short time. Here' ... fabric and beads should have a towel on top for an indirect contact, with the iron on a low setting.

How to Clean a Steam Iron ?

Description : How to Clean a Steam Iron ?

Last Answer : How to Clean a Steam Iron Ironing clothes with a steam iron is a relatively easy task, but if the appliance is not properly maintained, it will cause more harm than good. Steam irons become clogged ... ironing will not be a tedious task. Remember these steps and keep your steam iron in tiptop shape.

What to look for when choosing an iron?

Description : What to look for when choosing an iron?

Last Answer : What to look for when choosing an iron? Today, the purchase of an iron is not a big problem. This piece of household appliances is presented in a wide range of stores. Each manufacturer tries to ... its presence increases the cost of the iron by an average of 10%. Good luck with your choice!

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

In DC motor iron losses are occurred in?

Description : In DC motor iron losses are occurred in?

Last Answer : In DC motor iron losses are occurred in the armature.

A moving iron instrument can be used for?

Last Answer : A moving iron instrument can be used for both D.C. and A.C.

Iron losses in a D.C. machine are independent of variations in?

Last Answer : Iron losses in a D.C. machine are independent of variations in load.

In a D.C. generator, the iron losses mainly take place in?

Last Answer : In a D.C. generator, the iron losses mainly take place in armature rotor.