Laminated cores, in electrical machines, are used to reduce?

1 Answer

Answer :

Laminated cores, in electrical machines, are used to reduce eddy current loss.

Related questions

Description : Silicon steel is used in electrical machines because it has?

Last Answer : Silicon steel is used in electrical machines because it has low hysteresis loss.

Description : Why poles of dc machine are laminated?

Last Answer : Poles of DC machines are laminated to reduce the eddy current losses in the poles.

Description : In AC. circuits, laminated iron is invariably used in order to?

Last Answer : In AC. circuits, laminated iron is invariably used in order to reduce eddy current loss.

Description : Why does the core of a transformer need to be laminated?

Last Answer : Transformer cores are laminated to reduce eddy current loss.

Last Answer : Transformer core is laminated to reduce Eddy current losses.

Last Answer : The efficiency of transformer is Greater than electrical Machine because there is no rotational losses in transformer and there is no air gap losses in transformer so losses is less in transformer compare to electrical machine so efficiency is higher in case of transformer.

Description : How to Clean Laminated Floors ?

Last Answer : How to Clean Laminated Floors Laminated floors offer beauty and style just like hardwood or stone floors, but with much easier maintenance. Made with dense fibers and wood particles, the flooring material is ... indoors. Clean up spills as soon as possible for easier removal, and you're all set.

Description : Why is the armature of DC generator laminated?

Last Answer : The armature of DC generator is laminated to reduce eddy current losses.

Description : Can you guys explain the advantages of frequency converter against the star delta or soft starter?

Last Answer : ¬Soft starters  A soft starter is, as you would expect, a device which ensures a soft starting of a motor. A softstarter has different characteristics to the other starting ... at rated current from zero to full speed. Frequency converters are becoming cheaper all the time.

Description : What type of motor is used for drilling machines?

Last Answer : universal motor also used in Handheld power tools, blowers, blenders, vacuum cleaners, polishers and kitchen appliances.universal motor is defined as a motor which may be operated either on direct or single phase AC supply at approximately the same speed and output

Description : Are we losing control over our life to machines?

Last Answer : That is up to you. You can or you can decide to not.

Description : Heat Transfer Machines

Last Answer : Heat transfer machines are just the thing you need in order to do heat transfers on your clothing or whatever surface you want to decorate. In order for you to stick designs and precious stones on porous and ... is best. This will also give you an idea of what kind of designs you can choose from.

Description : The inertia constants of two groups of machines which do not swing together are M1 and M2. The equivalent inertia constant of the system is

Last Answer : The inertia constants of two groups of machines which do not swing together are M1 and M2. The equivalent inertia constant of the system is M1M2/M1+M2

Description : In dc machines, the armature windings are placed on the rotor because of the necessity for  (1) electromechanical energy conversion (2) generation of voltage (3) commutation (4) development of torque

Last Answer : 3  Commutation

Description : For protection of rotating machines against lightning surges _______ is used.  (1) lightning arrester (2) capacitor (3) combination of lightning arrester and capacitor (4) lightning conductor and arrester

Last Answer : For protection of rotating machines against lightning surges combination of lightning arrester and capacitor is used. 

Last Answer : Satisfactory commutation of D.C. machines requires brushes should be of proper grade and size, brushes should smoothly run in the holders, smooth, concentric commutator properly undercut.

Last Answer : For a D.C. machines laboratory following type of D.C. supply will be suitable induction motor D.C. generator set.

Last Answer : Brushes of D.C. machines are made of carbon.

Last Answer : Hopkinson's test on D.C. machines is conducted at full-load.

Last Answer : The purpose of retardation test on D.C. shunt machines is to find out stray losses.

Last Answer : In D.C. machines the residual magnetism is of the order of 2 to 3 percent.

Last Answer : In D.C. machines fractional pitch winding is used to reduce the sparking.

Last Answer : The speed control of universal motor used for sewing machines is by varying the resistance.

Last Answer : Exciters of synchronous machines are d.c. shunt machines.

Description : Losses which occur in rotating electric machines and do not occur in transformers are?

Last Answer : Friction losses windage losses 

Description : Transformer cores are laminated to reduce _____________. A. eddy currents B. secondary flux C. leakage flux D. all of the above

Last Answer : Answer: A

Description : Armature cores in a DC generator are made of laminated steel sheets to _____________. A. fit the curvature of the frame B. increase the hysteresis effect C. reduce eddy current losses D. allow for easy assembly

Last Answer : Answer: C

Description : 24 Transformer cores are laminated in order to A. simplify its construction B. minimise eddy current loss C. reduce cost D. reduce hysteresis loss

Last Answer : B. Minimise eddy current loss

Description : Eddy current losses in transformer cores can be reduced by the use of  1. Solid cores  2. Laminated cores  3. Ferrites  Select the correct answer using the codes given below : (a) 2 and 3 only (b). 1 and 2 only (c) 1 and 3 only (d) 1, 2 and 3

Last Answer : Eddy current losses in transformer cores can be reduced by the use of  1. Solid cores  2. Laminated cores  3. Ferrites  Select the correct answer using the codes given below : (a) 2 and 3 only (b). 1 and 2 only (c) 1 and 3 only (d) 1, 2 and 3

Description : Can anyone in the office machine business explain how click charges work?

Last Answer : can you give more specifics? Typically the contract would include a certain amt. of impressions (clicks) then any after that would be at a lesser rate.

Description : State any two applications of single phase autotransformer.

Last Answer : Applications of single phase auto transformers: 1) Give small boost to distribution cable to correct the voltage drop. 2) As auto transformer starter for induction motors. 3) As furnace supply ... . 5) In control equipment for single phase locomotives. 6) As dimmer in lighting circuits.

Description : State any two conditions for parallel operation of 3-phase transformer.

Last Answer : Conditions for Parallel operation of 3 phase transformer 1) Voltage ratings of both the transformers must be identical. 2) Percentage or p.u. impedance should be equal in magnitude. 3) X/R ratio ... between primary & secondary voltages must be same. 6) Phase sequence on both sides must be same.

Description : Compare core type transformer and shell type transformer on the following parameters. (i) Types of winding used, (ii) Application

Last Answer : Ans:

Description : Define transformation ratio in terms of current and voltage.

Last Answer : (i) Transformation Ratio (K) is defined as the ratio of the primary current to the secondary current.  (ii) Transformation Ratio (K) is defined as the ratio of the secondary voltage to the primary voltage.

Description : Define: (i) Commercial efficiency of a transformer and  (ii) All day efficiency of a transformer.

Last Answer : (i) Commercial Efficiency : It is the ratio of output power in watt to the input power in watt. (ii) All day efficiency of a transformer: It is the ratio of output energy in kWh to the input energy in kWh in the 24 hours of the day

Description : A 50 KVA transformer has iron loss 2 kW on full load. Calculate its iron loss at 75% of full load.

Last Answer : Iron loss is dependent on voltage and independent of load. Hence iron loss at 75% of Load = Iron loss at full load = 2 kW

Description : State any four properties of Ideal transformer.

Last Answer : Properties of Ideal transformer: 1) No losses (iron and copper losses), hence no temperature rise. 2) No magnetic leakage i.e (Coefficient of coupling between primary and secondary windings is unity) 3) Zero winding ... drop i.e. E1 = V1, E2 = V2 5) Efficiency 100 %. 6) Regulation 0 %.

Description : Draw the connection diagram of long shunt differential D.C. compound generator.

Last Answer : Ans:

Description : List any four advantages and two disadvantages of 3 phase induction motor.

Last Answer : Advantages of 3 phase induction motor: 1) Simple in construction. 2) Economical in cost. 3) Requires very less maintenance. 4) High efficiency. 5) Low maintenace cost. 6) Self starting. 7 ... operated below its full load capacity. 6) It takes a large current from line at instant of starting.

Description : Explain how in a 3 phase induction motor to a rotating magnetic field is developed. 

Last Answer : Production of Rotating Magnetic Field in Three-phase Induction Motor: In three-phase induction motor, the three-phase stator windings are displaced in space by 120° and their three-phase currents are displaced ... time by 120°. Such fluxes give rise to the resultant rotating magnetic field.

Description : Transformer cores are laminated with (A) Low carbon steel. (B) Silicon sheet steel. (C) Nickel alloy steel. (D) Chromium sheet steel.

Last Answer : (B) Silicon sheet steel.

Description : Briefly explain how an electrical generator converts mechanical energy into electrical energy.

Last Answer : Working principle of DC generator: * Working principle of DC generator is the principle of dynamically induced emf or electromagnetic induction. * According to this principle, when flux is cut by a conductor, an ... , the flux is cut by the armature winding and an emf is dynamically induced in it. 

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Last Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

Description : GATE 2020 syllabus electrical engineering

Last Answer : EE: Electrical Engineering Section 1: Engineering Mathematics Linear Algebra: Matrix Algebra, Systems of linear equations, Eigenvalues, Eigenvectors. Calculus: Mean value theorems, Theorems of ... to dc converters, Single phase and three phase inverters, Sinusoidal pulse width modulation.

Description : Electrical specifications with values for washing machine. 

Last Answer : 1. Type: Top loading / Front loading type 2. Capacity range: 6kg to 15kg 3. Motor Used: Induction motor 4. Input voltage: 100V- 240V 5. Power: in 1200W / Output power 100–400W{can go upto 1000W) 6. Efficiency: Max efficiency 31% 7. Wattage: 2.100-2.400 W 8. Current: 13A 9. Frequency: 50hz

Description : electrical specifications of microwave oven.

Last Answer : Supply voltage: 220 volts,50 Hz. Single phase A.C. Power consumption: 1300 W approx.(power consumption vary as manufacturer from500W to 1500W) Microwave power: 700 w-850 W Microwave frequency: 2450 ... ) Timer: 60 min. - 90 min(timer can also varied) Control: Soft/one touch control

Description : Name safety tools used in industry for electrical wiring.

Last Answer : Safety tools used in industry for electrical wiring : 1) Hand gloves 2) Goggles 3) Rubber mats 4) Fire extinguishers 5) Danger notice plates 6) Search lights 7) Safety shoes or Gumboots 8) Ear plugs ... belts 13) Safety mask 14) Fire buckets 15) First aid box 16) Insulating stick or discharge rod

Description : Write example of each type (i) Primary transducer (ii) Active transducer (iii) Electrical transducer (iv) Digital transducer

Last Answer : (i) Active transducer:-Thermocouple, piezoelectric, photovoltaic cell (ii) Primary transducer:- Bourdon tube, bellows, (iii) Electrical transducer.:- LVDT,RVDT, Hall effect, strain gauge, ... , optical pyrometer, radiation pyrometer (iv) Digital transducer:- Linear Encoder, digital taco generator

Description : Define the term electrical noise. List types of noises.

Last Answer : Electrical Noise:- It can be defined as undesirable electrical signals, which distort or interfere with an original (or desired) signal.  Types of noises:- 

Description : What are the main electrical equipment used in HPS ? State the function of each parts of it in brief. 

Last Answer : Following Main Electrical Equipment used in HPS & their function: 1. Alternator 2. Exciter 3. Transformer 4. Switchgear   Function :  1) Alternator:- Alternator is coupled to ... part from the healthy section. It contains circuit breaker, relays, switches and other control devices.