The minimum charge on an ion is?

The minimum charge on an ion is?

The minimum charge on an ion is equal to the charge of an electron.

Related questions

Description : How can the state of charge of battery is best indicated?

Last Answer : Ans. The state of charge of battery is best indicated by specific gravity of electrolyte and voltage.

Description : A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Last Answer : The current is 10.0A.  1ampere = 1 Coulomb per 1 second.  0.1Coulombs ÷ 0.01seconds = 10.0amperes.

Description : Coulomb Siemens Farad Joule

Description : The state of charge of the battery is indicated by the electrolyte's :  (A) mass (B) colour (C) viscosity (D) specific gravity

Last Answer : The state of charge of the battery is indicated by the electrolyte's : specific gravity

Description : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Last Answer : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Description : How do you charge a capacitor with a battery?

Last Answer : The  capacitor  is  connected   in  parallel  with   the  battery.

Description : What is the charge and mass of an electron?

Last Answer : Charge on electrons is 1.6022*10-19CAnd the mass of electrons is 9.109*10-31 kg

Description : How the charge Carriers are created?

Last Answer : Charge Carriers are created if the electrons is removed from atom .

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Description : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω

Last Answer : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω

Description : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Last Answer : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be 3

Description : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when

Last Answer : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when The incremental fuel cost of each plant multiplied by the penalty factor is the same

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB

Last Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB

Description : The Minimum Oil Circuit Breaker (MOCB) is named because of :  (A) Reduced requirement of oil (B) Reduced requirement of air (C) All of the above (D) None of the above

Last Answer : The Minimum Oil Circuit Breaker (MOCB) is named because of : Reduced requirement of oil

Description : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV

Last Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

Description : ln a minimum oil circuit breaker the oil is used

Last Answer : ln a minimum oil circuit breaker the oil is used to act as circuit breaking medium only

Description : Build using minimum number of CMOS gates. Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

Last Answer : Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

Description : Minimum voltage regulation occurs when the power factor of the load is?

Description : what is the minimum voltage required to turn on a diode ?

Last Answer : 0.7 v sil and 0.3 v for gr

Description : The minimum resistance value for a blue, gray, red, silver resistor is? A.612 ohms B.6,120 ohms C.6,800 ohms D.6,460 ohms

Last Answer : The minimum resistance value for a blue, gray, red, silver resistor is? A.612 ohms B.6,120 ohms C.6,800 ohms D.6,460 ohms

Description : What should I do for my first charge with a Lithium-Ion Battery?

Last Answer : To keep the battery at optimum condition, once a month let the battery run completely out, then fully charge it. The battery will ‘reset’ and this will prolong battery life. As far as breaking in…I’ve never done any of those things you listed, but that shouldn’t be a problem either way.

Description : The number of electrons present in the valence shell of carbon of `CH_(3)overset(+)(C)H_(2)` ion bearing `+ve` charge:

Last Answer : The number of electrons present in the valence shell of carbon of `CH_(3)overset(+)(C)H_(2)` ion bearing `+ve` charge: A. 8 B. 7 C. 6 D. 4

Description : What is the charge of nitrogen when it becomes ion?

Last Answer : The common charge on nitrogen when it becomes an ion is minus 3(-3).

Description : What the charge on the aluminium ion?

Description : What period 2 element is most likely to form an ion with the charge of minus 2?

Last Answer : This element is oxygen.

Description : What is the charge on a hypothetical ion with 65 protons and 62 electrons?

Description : A Zwitter ion is one which has in aqueous solution: (A) One positive charge and one negative charge (B) Two positive charges and one negative charge (C) Two negative charges and one positive charge (D) No electrical charges at all

Description : Electron-withdrawing groups are meta directors because : (a) the carbonium ion intermediate has a negative charge on the meta position. (b) the more stable resonance hybrid occurs with meta ... the electrophile. (d) the carbonium ion intermediate has a positive charge on the meta position

Last Answer : the more stable resonance hybrid occurs with meta attachment of the electrophile.

Description : A zwitterion is (a) an ion that is positively charged in solution (b) an ion that is negatively charged in solution (c) a compound that can ionize both as a base and an acid. (d) a carbohydrate with an electrical charge.

Last Answer : a compound that can ionize both as a base and an acid

Description : Why does a H+ ion attacking a carbon-carbon double bond add to the carbon with the least number of substituents? (a) the reaction is resonance stabilized. (b) the hybrid geometry favors this ... tends to attack stable centers of negative charge. (d) a more stable carbonium ion is generated.

Last Answer : a more stable carbonium ion is generated.

Description : An element has the following numbers of electrons in its shells: 2-8-8-2. Which of the following is true? The element: w) is a nonmetal x) forms an ion with a charge of +2 y) can accept two electrons z) forms a negative ion

Last Answer : ANSWER: X -- FORMS AN ION WITH A CHARGE OF +2

Description : Inductance

Description : Resistance

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Last Answer : 360 degree . 180 Degree Positive and 180 degree negative

Description : An ideal power supply consist of   (A) Very small output resistance (B) Zero Internal resistance (C) Very large input resistance (D) Very large output resistance

Last Answer : An ideal power supply consist of Zero Internal resistance

Description : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

Last Answer : When a sine wave has a frequency of 100 Hz in 12 s it goes through? A.1/100 cycle B.12 cycles C.120 cycles D.1,200 cycles

Description : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Last Answer : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Description : Fourteen milliamperes can be expressed as? A.14 MA B.14 μA C.14 kA D.14 mA

Last Answer : Fourteen milliamperes can be expressed as? A.14 MA B.14 μA C.14 kA D.14 mA

Description : How much voltage is needed to produce 2.5 A of current through a 200 ohms resistor? A.50 V B.500 V C.80 V D.8 V

Description : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

Last Answer : When there is 12 mA of current through a 1.2 k ohms resistor, the voltage across the resistor is? A.14.4 V B.1.4 V C.100 V D.10 V

Description : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

Last Answer : How much resistance is needed to draw 17.6 mA from a 12 volt source? A.212 ohms B.6.8 kohms C.68 ohms D.680 ohms

Description : When placed close together, two positively charged materials will? A.attract B.become neutral C.become negative D.repel

Last Answer : When placed close together, two positively charged materials will? A.attract B.become neutral C.become negative D.repel

Description : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

Last Answer : The colored bands for a 4,700 ohm resistor with a ten percent tolerance are? A.yellow, violet, red, gold B.yellow, violet, orange, gold C.yellow, violet, red, silver D.orange, violet, red, silver

Description : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

Last Answer : A certain appliance uses 350 W. If it is allowed to run continuously for 24 days, how many kilowatt- hours of energy does it consume? A.20.16 kWh B.201.6 kWh C.2.01 kWh D.8.4 kWh

Description : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

Last Answer : When the turns ratio of a transformer is 20 and the primary ac voltage is 12 V, the secondary voltage is? A.12 V B.120 V C.240 V D.2,400 V

Description : In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary current is? A.one-fourth the primary current B.four times the primary current C.equal to the primary current D.one-fourth the primary current and equal to the primary current

Last Answer : In a certain loaded transformer, the secondary voltage is one-fourth the primary voltage. The secondary current is? A.one-fourth the primary current B.four times the primary current C.equal to the primary current D.one-fourth the primary current and equal to the primary current

Description : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

Last Answer : In a Y-connected circuit, the magnitude of each line current is? A.one-third the phase current B.three times the corresponding phase current C.equal to the corresponding phase current D.zero

Description : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

Last Answer : The primary coil of a transformer is connected to a 60 V ac source. The secondary coil is connected to a 330 ohms load. The turns ratio is 3:1. What is the secondary voltage? A.2 V B.20 V C.180 V D.18 V

Description : The turns ratio required to match an 80 ohms source to a 320 ohms load is? A.80 B.20 C.4 D.2