Two wire of the same meta have same length, but their cross-sections are in the rati `3:1` . They are joined in series. The resistance of thicker wire

Two wire of the same meta have same length, but their cross-sections are in the rati `3:1` . They are joined in series. The resistance of thicker wire
by

1 Answer

Answer :

Two wire of the same meta have same length, but their cross-sections are in the rati `3:1` . They are ... )Omega` C. `(5)/(2)Omega` D. `100Omega`
by
selected by

Related questions

A resistance of `4 Omega` and a wire of length 5 meters and resistance `5 Omega` are joined in series and connected to a cell of e.m.f. `10 V` and int

Description : A resistance of `4 Omega` and a wire of length 5 meters and resistance `5 Omega` are joined in series and connected to a cell of e.m.f. `10 V` and int

Last Answer : A resistance of `4 Omega` and a wire of length 5 meters and resistance `5 Omega` are joined in series and connected ... `3.0V` C. `0.67V` D. `1.33V`

Assertion : Two resistance wires shown in figure are of same material. They have equal length. More heat is generated in wire A. Reason : In series `H

Description : Assertion : Two resistance wires shown in figure are of same material. They have equal length. More heat is generated in wire A. Reason : In series `H

Last Answer : Assertion : Two resistance wires shown in figure are of same material. They have equal length. More ... . If Assertion is false but Reason is true.

A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, is _____________. A. four times as great B. twice as much C. the same as the original resistance D. one-half of the original resistance

Description : A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, ... B. twice as much C. the same as the original resistance D. one-half of the original resistance

Last Answer : Answer: A

When the length and cross sectional area of a wire are both tripled, the resistance _____________. A. increases nine fold B. increases three fold C. remains the same D. decreases six fold

Description : When the length and cross sectional area of a wire are both tripled, the resistance _____________. A. increases nine fold B. increases three fold C. remains the same D. decreases six fold

Last Answer : Answer: C

A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of the original wire C. the same as that of the original wire D. one-half that of the original wire

Description : A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of ... wire C. the same as that of the original wire D. one-half that of the original wire

Last Answer : Answer: A

The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Description : The cross sections of the beams of equal length are a circle and a square whose permissible bending stress is same under same maximum bending. The ratio of their flexural weights is, (A) 1.118 (B) 1.338 (C) 1.228 (D) 1.108

Last Answer : (A) 1.118

Ratio of diameters of two shafts joined in series is 2. If the two shafts have the same material and the same length the ratio of their shear stresses is a. 2 b. 4 c. 8 d. 16

Description : Ratio of diameters of two shafts joined in series is 2. If the two shafts have the same material and the same length the ratio of their shear stresses is a. 2 b. 4 c. 8 d. 16

Last Answer : c. 8

Ratio of diameters of two shafts joined in series is 2. If the two shafts have the same material and the same length the ratio of their angles of twist is a. 2 b. 4 c. 8 d. 16

Description : Ratio of diameters of two shafts joined in series is 2. If the two shafts have the same material and the same length the ratio of their angles of twist is a. 2 b. 4 c. 8 d. 16

Last Answer : d. 16

A uniform wire of resistance `9 Omega` is joined end-to-end to from a circule. Then, the resistance of the circular wire between any two diametrically

Description : A uniform wire of resistance `9 Omega` is joined end-to-end to from a circule. Then, the resistance of the circular wire between any two diametrically

Last Answer : A uniform wire of resistance `9 Omega` is joined end-to-end to from a circule. Then, the resistance of the ... (9)/(4)Omega` D. `(3)/(2)Omega`

Two resistances are joined in parallel whose resultant is `6//8 ohm`. One of the resistance wire is broken and the effective resistance becomes `2 Ome

Description : Two resistances are joined in parallel whose resultant is `6//8 ohm`. One of the resistance wire is broken and the effective resistance becomes `2 Ome

Last Answer : Two resistances are joined in parallel whose resultant is `6//8 ohm`. One of the resistance wire is broken and the ... /5` B. 2 C. `6//5` D. 3

Calculate the conductivity of a wire of length 2 m, area of cross-sectionl `2 cm^(2)` and resistance `10^(-4) Omega`.

Description : Calculate the conductivity of a wire of length 2 m, area of cross-sectionl `2 cm^(2)` and resistance `10^(-4) Omega`.

Last Answer : Calculate the conductivity of a wire of length 2 m, area of cross-sectionl `2 cm^(2)` and resistance `10^(-4) Omega`.

A negligbly small current is passed through a wire of length 15 cm and uniform cross-section `6.0xx10^(-7) m^(2)` and its resistance is measured to be

Description : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section `6.0xx10^(-7) m^(2)` and its resistance is measured to be

Last Answer : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section ` ... the material at the temperature of the experiment ?

A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area of cross-section gets halved. Now, th

Description : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area of cross-section gets halved. Now, th

Last Answer : A wire of resistance `4 Omega` is stretched to twice its original length. In the process of stretching, its area ... Omega` C. `1 Omega` D. `4 Omega`

A metal wire of circular cross-section has a resistance `R_(1)`. The wire is now stretched without breaking, so that its length is doubled and the den

Description : A metal wire of circular cross-section has a resistance `R_(1)`. The wire is now stretched without breaking, so that its length is doubled and the den

Last Answer : A metal wire of circular cross-section has a resistance `R_(1)`. The wire is now stretched without breaking, so that its ... 2` C. `4 : 1` D. `1 : 4`

The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases

Description : The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases

Last Answer : Answer: B

If the length of a wire is halved and the cross-sectional area is doubled, the resistance will be _____________. A. quartered B. unchanged C. doubled D. quadrupled

Description : If the length of a wire is halved and the cross-sectional area is doubled, the resistance will be _____________. A. quartered B. unchanged C. doubled D. quadrupled

Last Answer : Answer: A

Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Description : Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect

Last Answer : resistance

Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature

Last Answer :  it is directly proportional to the area of cross-section of wire

What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled?

Description : What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled? A) It doubles B) It becomes 4 times C) It becomes 2π times D) It remains the same

Last Answer : Automatically the resistivity will increase as they are the factors affecting the resistivity 

A wire of resistance R has it length and cross-section both doubled. Its resistance will become

Last Answer : A wire of resistance R has it length and cross-section both doubled. Its resistance will become R.

A potentiometer wire of length `100 cm` having a resistance of `10 Omega` is connected in series with a resistance `R` and a cell of emf `2V` of negli

Description : A potentiometer wire of length `100 cm` having a resistance of `10 Omega` is connected in series with a resistance `R` and a cell of emf `2V` of negli

Last Answer : A potentiometer wire of length `100 cm` having a resistance of `10 Omega` is connected in series with a ... Omega` C. `790 Omega` D. `840 Omega`

A potentiometer wire has length `4 m` and resistance `8 Omega`. The resistance that must be connected in series with the wire and an accumulator of e.

Description : A potentiometer wire has length `4 m` and resistance `8 Omega`. The resistance that must be connected in series with the wire and an accumulator of e.

Last Answer : A potentiometer wire has length `4 m` and resistance `8 Omega`. The resistance that must be connected in ... Omega` C. `44 Omega` D. `48 Omega`

AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a resistance R = 40 `Omega` and a battery

Description : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a resistance R = 40 `Omega` and a battery

Last Answer : AB is a potentiometer wire of length 100 cm and its resistance is `10Omega`. It is connected in series with a ... `1.6V` C. `0.08V` D. `0.16V`

A 2 V battery, a `990Omega` resistor and a potentiometer of 2 m length, all are connected in series of the resistance of potentiometer wire is `10Omeg

Description : A 2 V battery, a `990Omega` resistor and a potentiometer of 2 m length, all are connected in series of the resistance of potentiometer wire is `10Omeg

Last Answer : A 2 V battery, a `990Omega` resistor and a potentiometer of 2 m length, all are connected in series of the resistance ... 0.01Vm^(-1)` D. `0.1Vm^(-1)`

Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If `0.2 mV/cm` is the potential gradient, the

Description : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If `0.2 mV/cm` is the potential gradient, the

Last Answer : Potentiometer wire of length `1 m` is connected in series with `490 Omega` resistance and `2 V` battery. If ... 7.9Omega` C. `5.9Omega` D. `6.9Omega`

Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item (B) The centre line is worked out separately for different sections of walls of a building (C) The centre line length is reduced by half the layer of main wall joining the partition wall (D) All the above

Description : Pick up the correct statement regarding the centre line method of estimating a building (A) Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the ... length is reduced by half the layer of main wall joining the partition wall (D) All the above

Last Answer : (D) All the above

The secondary coil of a transformer in which the voltage is stepped down are usually made of thicker wire than primary. Why?

Description : The secondary coil of a transformer in which the voltage is stepped down are usually made of thicker wire than primary. Why?

Last Answer : The secondary coil is made of thicker wire to sustain larger electric current.

Out of five resistance of `ROmega` each 3 are connected in parallel and are joined to the rest 2 in series. Find the resultant resistance.

Description : Out of five resistance of `ROmega` each 3 are connected in parallel and are joined to the rest 2 in series. Find the resultant resistance.

Last Answer : Out of five resistance of `ROmega` each 3 are connected in parallel and are joined to the rest 2 in series. Find ... `(7//8)ROmega` D. `(8//7)ROmega`

The `n` rows each containinig `m` cells in series are joined parallel. Maximum current is taken from this combination across jan external resistance o

Description : The `n` rows each containinig `m` cells in series are joined parallel. Maximum current is taken from this combination across jan external resistance o

Last Answer : The `n` rows each containinig `m` cells in series are joined parallel. Maximum current is taken from this combination ... n = 2 D. m = 2, n = 12

If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Description : If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Last Answer : Materials

Assertion : If a current flows through a wire of non-uniform cross-section, potential difference per unit length of wire is same throughout the length

Description : Assertion : If a current flows through a wire of non-uniform cross-section, potential difference per unit length of wire is same throughout the length

Last Answer : Assertion : If a current flows through a wire of non-uniform cross-section, potential difference per ... . If Assertion is false but Reason is true.

What is the difference between a cross assembler and a meta assembler?

Description : What is the difference between a cross assembler and a meta assembler?

Last Answer : Feel Free to Answer

For two shafts joined in series, the --------------- in each shaft is same. a. shear stress. b. Angle of twist c. torque d. torsional stress.

Description : For two shafts joined in series, the --------------- in each shaft is same. a. shear stress. b. Angle of twist c. torque d. torsional stress.

Last Answer : c. torque

How focal length is affected when the lens of eye becomes thicker?

Description : How focal length is affected when the lens of eye becomes thicker?

Last Answer : In order to look something near to eye, ciliary muscles make the lens thicker and its focal length becomes shorter. So the image is formed on retina instead of point beyond it.

A 1m long wire of diameter `0.31mm` has a resistance of `4.2 Omega`. If it is replaced by another wire of same material of length `1.5m` and diameter

Description : A 1m long wire of diameter `0.31mm` has a resistance of `4.2 Omega`. If it is replaced by another wire of same material of length `1.5m` and diameter

Last Answer : A 1m long wire of diameter `0.31mm` has a resistance of `4.2 Omega`. If it is replaced by another wire of ... 6 Omega` C. `26.7 Omega` D. `0.8 Omega`

When two ends of a circular uniform wire are joined to the terminals of a battery, the field at the center of the circle

Last Answer : When two ends of a circular uniform wire are joined to the terminals of a battery, the field at the center of the circle will depend on the radius of the circle.

A non - popular loop of conducting wire carrying a current `I` is placed as shown in the figure . Each of the straighrt sections of the loop is of the

Description : A non - popular loop of conducting wire carrying a current `I` is placed as shown in the figure . Each of the straighrt sections of the loop is of the

Last Answer : A non - popular loop of conducting wire carrying a current `I` is placed as shown in the figure . Each of the ... `(1)/(sqrt(2))(hat(i)+hat(k))`

Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section

Description : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section

Last Answer : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift ... . If Assertion is false but Reason is true.

Ab and Ac are the cross sections of bronze and copper bars of equal lengt b c are their respective stresses due to load P. If Pb and Pc are the loads shared by them, (where Eb and Ec are their modulii). (A) b c = Eb /Ec (B) P = Pb + Pc (C) P = Ab b + Ac b (D) All the above

Description : Ab and Ac  are the cross sections of bronze and copper bars of equal lengt b c  are their  respective stresses due to load P. If Pb and Pc  are the loads shared by them, (where Eb and Ec  are  their modulii) ... /Ec (B) P = Pb + Pc (C) P = Ab b + Ac b (D) All the above 

Last Answer : (D) All the above 

Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225 mm^2

Description : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225 mm^2

Last Answer : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225mm2 when a load ... 's modulus of steel= 2 1011 N/m2]

A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Description : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free

Last Answer : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)` ... taken by an electron to cross the length of the wire.

The cell wall of A.gram-positive bacteria are thicker than gram-negative bacteria B.gram-negative bacteria are thicker than gram-positive bacteria C.both have same thickness but composition is different D.none of these

Description : The cell wall of A.gram-positive bacteria are thicker than gram-negative bacteria B.gram-negative bacteria are thicker than gram-positive bacteria C.both have same thickness but composition is different D.none of these

Last Answer : A.gram-positive bacteria are thicker than gram-negative bacteria

The cell wall of A- gram-positive bacteria are thicker than gram-negative bacteria B- gram-negative bacteria are thicker than gram-positive bacteria C- both have same thickness but composition is different D- none of these

Description : The cell wall of A- gram-positive bacteria are thicker than gram-negative bacteria B- gram-negative bacteria are thicker than gram-positive bacteria C- both have same thickness but composition is different D- none of these

Last Answer : gram-positive bacteria are thicker than gram-negative bacteria

For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Last Answer : (6) electrical conductivity

Hydraulic mean radius is A. Mean radius of sewer B. Difference in heads between two points in circular pipes C. Mean of radii in a pipe line of varying cross -sections D. Cross-sectional area/wetted perimeter

Description : Hydraulic mean radius is A. Mean radius of sewer B. Difference in heads between two points in circular pipes C. Mean of radii in a pipe line of varying cross -sections D. Cross-sectional area/wetted perimeter

Last Answer : ANS: D

A simplified version of the Wheatstone bridge wherein, two of the ratio arms are replaced by a 100cm long Manganin of uniform cross-sections and provided with a slider

Description : A simplified version of the Wheatstone bridge wherein, two of the ratio arms are replaced by a 100cm long Manganin of uniform cross-sections and provided with a slider

Last Answer : slide-wire bridge

A streamline is (A) The line connecting the mid-points of flow cross-sections (B) Defined for uniform flow only (C) Drawn normal to the velocity vector at every point (D) Always the path of a particle

Description : A streamline is (A) The line connecting the mid-points of flow cross-sections (B) Defined for uniform flow only (C) Drawn normal to the velocity vector at every point (D) Always the path of a particle

Last Answer : (C) Drawn normal to the velocity vector at every point

Pick up the correct statement from the following: (A) For channels, the shear centre does not coincide its centroid (B) The point of intersection of the bending axis with the cross section of the beam, is called shear centre (C) For I sections, the shear centre coincides with the centroid of the cross section of the beam (D) All the above

Description : Pick up the correct statement from the following:  (A) For channels, the shear centre does not coincide its centroid  (B) The point of intersection of the bending axis with the cross section ... shear centre coincides with the centroid of the cross section of the beam  (D) All the above

Last Answer : (D) All the above

If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2(D) D/6m(h1 - h2)3

Description : If h1 and h2 are the differences in level between ground and the formation levels, m is the slope of the sloping sides. D is the distance between the cross sections then, Prismoidal correction for a level section is (A) D/2m(h1 - h2) (B) D/3m(h1 - h2) (C) D/6m(h1 - h2)2 (D) D/6m(h1 - h2)3

Last Answer : (C) D/6m(h1 - h2)2