Description : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries a current of `24 mA`, then drift veloc
Last Answer : A conducting wire of cross-sectional area `1 cm^(2)` has `3 xx 10^(23)` charge carriers per m3. If wire carries ... 3)ms^(-1)` D. `5xx10^(-6)ms^(-1)`
Description : A current of 4.8 A is flowing in a copper wire of cross-sectional area `3xx10^(-4) m^(2)`. Find the current density in the wire.
Last Answer : A current of 4.8 A is flowing in a copper wire of cross-sectional area `3xx10^(-4) m^(2)`. Find the current density in the wire.
Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1
Last Answer : 0.015 mm s-1
Description : The resistance of electric wire will decrease as its _______________. A. length increases B. cross-sectional area increases C. temperature increases D. percent of metallic purities increases
Last Answer : Answer: B
Description : At room temperature copper has free electron density of `8.4xx10^(28) per m^(3)` . The copper conductor has a cross-section of `10^(-6)m^(2)` and carr
Last Answer : At room temperature copper has free electron density of `8.4xx10^(28) per m^(3)` . The copper conductor has a cross ... . `4cms^(-1)` D. `0.4mms^(-1)`
Description : E.M.F for a coil depends upon A. the cross sectional area B. no. of turns of wire C. the magnitude of magnetic flux density D. all of above
Last Answer : all of above
Description : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)`. If each cubic metre of the wire contains `10^(29)` free
Last Answer : A current of 2 A is flowing through a wire of length 4 m and cross-sectional area `1 mm^(2)` ... taken by an electron to cross the length of the wire.
Description : When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above
Last Answer : (a) One coulomb
Description : The free electrons of a copper wire of cross-sectional area `10^(-6) m^(2)` acquire a drift velocity of `10^(-4) m//s` when a certain potential differ
Last Answer : The free electrons of a copper wire of cross-sectional area `10^(-6) m^(2)` acquire a drift velocity of `10 ... is `8.5xx10^(28) "electrons"//m^(3)`.
Description : Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these
Last Answer : (B) Passing it through a pressure reducing valve
Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ
Last Answer : (A) 3.6 AVS.ρ
Description : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current of 1 A. The resistivity of copper `=1.7xx10^(-8)
Last Answer : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current ... of copper `=1.7xx10^(-8) Omega`m.
Description : Change in length and cross-sectional area of metal wire changes A. current B. voltage C. resistance D. magnetic effect
Last Answer : resistance
Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg
Last Answer : a. 15 - 20 kg
Description : Charge passing through a conductor of cross-section area `A=0.3 m^(2)` is given by `q=3t^(2)+5t+2` in coluomb, where t is second. What is the value of
Last Answer : Charge passing through a conductor of cross-section area `A=0.3 m^(2)` is given by `q=3t^(2)+5t+2` ... . `2Omega` B. `1Omega` C. `4Omega` D. `5Omega`
Description : Charge passing through a conductor of cross-section area `A=0.3 m^(2)` is given by `q=3t^(2)+5t+2 in coluomb, where t is second. What is the value of
Last Answer : Charge passing through a conductor of cross-section area `A=0.3 m^(2)` is given by `q=3t^(2)+5t+2 in coluomb, ... ^(-5)m//s` D. `0.57xx10^(5)m//s`
Description : What is the drift velocity of electrons in a copper conductor having a cross-sectional area of `5xx10^(-6) m^(2)` if the current is 10 A. Assume there
Last Answer : What is the drift velocity of electrons in a copper conductor having a cross-sectional area of `5xx10^(-6) m^( ... `8.0xx10^(28) "electrons"//m^(3)`.
Description : In the electrolysis of silver chloride, a charge of `4xx10^(5)` C is flowing through the electrolyte. Calculate the number of silver `(Ag^(+))` ions f
Last Answer : In the electrolysis of silver chloride, a charge of `4xx10^(5)` C is flowing through the electrolyte. ... silver `(Ag^(+))` ions flowing through it.
Description : Capacity of field choppers (chaff cutter) is affected by.... (a) Capacity of the feed mechanism (cross-sectional area) (b) Rate of advance of material through throat considered as to be same linear speed of feed mechanism (c) Density of forage material (d) All of the above
Last Answer : (d) All of the above
Description : Capacity of field choppers (chaff cutter) is affected by (a)capacity of the feed mechanism (cross sectional area) (b)Rate of advance of material through throat considered as to be the same linear speed of feed mechanism (c) density of forage material (d) all of the above
Last Answer : (d) all of the above
Description : Ten Coulombs of charge flowing through a wire per second is equal to: w) 100 Amperes x) 10 Ampere y) 1 Amperes z) 0.1 Amperes
Last Answer : ANSWER: X -- 10 AMPERES
Description : A steel wire having cross sectional area 1.2 mm is stretched by a force of 120 N.
Last Answer : A steel wire having cross sectional area 1.2 mm is stretched by a force of 120 N. If a ... is produced in the wire, calculate the Poisson's ratio.
Description : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225 mm^2
Last Answer : Calculate the work done in stretching a steel wire of length 2m and cross sectional area 0.0225mm2 when a load ... 's modulus of steel= 2 1011 N/m2]
Description : A wire is being used as a replacement having twice the length and one-half the cross-sectional area of the original wire. The resistance of this new wire, when compared to that of the original wire, ... B. twice as much C. the same as the original resistance D. one-half of the original resistance
Last Answer : Answer: A
Description : When the length and cross sectional area of a wire are both tripled, the resistance _____________. A. increases nine fold B. increases three fold C. remains the same D. decreases six fold
Last Answer : Answer: C
Description : The standard measuring unit of wire by its cross-sectional area, as used in American wire tables is the _____________. A. AWG B. circular mil C. square millimeter D. cubic inch
Description : If the length of a wire is halved and the cross-sectional area is doubled, the resistance will be _____________. A. quartered B. unchanged C. doubled D. quadrupled
Description : A replacement wire having twice the length and one-half the cross-sectional area of the original wire will have a resistance that is _____________. A. four times that of the original wire B. twice that of ... wire C. the same as that of the original wire D. one-half that of the original wire
Description : Which solid AWG wire size has the smallest physical cross-sectional area? A. 12 B. 14 C. 16 D. 18
Last Answer : Answer: D
Description : The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection
Last Answer : (C) Ratio of mean coil diameter to wire diameter
Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection
Last Answer : (D) Force required to produce unit deflection
Description : What happens to the resistance of a wire when its length as well as the cross-sectional area are doubled? A) It doubles B) It becomes 4 times C) It becomes 2π times D) It remains the same
Last Answer : Automatically the resistivity will increase as they are the factors affecting the resistivity
Description : An electron in potentiometer experiences a force `2.4xx10^(-19)N`. The length of potentiometer wire is 6m. The emf of the battery connected across the
Last Answer : An electron in potentiometer experiences a force `2.4xx10^(-19)N`. The length of potentiometer wire is 6m. The emf of ... 6 V B. 9 V C. 12 V D. 15 V
Description : ____________ is the average rate of transmission of sound energy in a given direction through a cross sectional area of 1 sq.m. at right angle to the direction. A. Sound pressure B. Sound intensity C. Pressure variation D. Loudness
Last Answer : B. Sound intensity
Description : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a magnetic field of `5xx10^(-2)` Wb `m^(-2)`. If
Last Answer : The coil of a moving coil galvanometer has an effective area of 4xx10^(-2)m^(2)`. It is suspended in a ... D. current sensitivity is `40 deg` `A^(-1)`
Description : Indicate the false statement about the resistance of a wire (1) it depends on material of wire (2) it is directly proportional to the length of wire (3) it is directly proportional to the area of cross-section of wire (4) resistance of metallic wire increases with increase in temperature
Last Answer : it is directly proportional to the area of cross-section of wire
Description : A silver wire of radius `0.1 cm` carries a current of 2A. If the charge density in silver is `5.86xx10^(28)m^(-3)`, then the drif velocity is
Last Answer : A silver wire of radius `0.1 cm` carries a current of 2A. If the charge density in silver is `5.86xx10^(28)m^(- ... -4)ms^(-1)` D. `7xx10^(-4)ms^(-1)`
Description : In case of a pipe of constant cross-sectional area, the maximum fluid velocity obtainable is (A) The velocity of sound (B) Dependent on its cross-sectional area (C) Dependent on fluid viscosity (D) Dependent on fluid density
Last Answer : (A) The velocity of sound
Description : If the cross-sectional area of a magnetic field increases, but the flux remains the same, the flux density: A. increases B. decreases C. remains the same D. doubles
Last Answer : If the cross-sectional area of a magnetic field increases, but the flux remains the same, the flux density: decreases
Description : If edge length of an unit cell `=4xx10^(-8)` cm and the unit cell is a face-centered cubic with atomic mass of metal is 40 then density of the unit ce
Last Answer : If edge length of an unit cell `=4xx10^(-8)` cm and the unit cell is a face-centered cubic with atomic mass of ... /(24) `gm/ml D. `(1)/(4)` gm/litre
Description : When a current of `(2.5 +- 0.5)` ampere flows through a wire, it develops a potential difference of `(20 +- 1)` volt, the resistance of the wire is
Last Answer : When a current of `(2.5 +- 0.5)` ampere flows through a wire, it develops a potential difference of `(20 +- ... `(8 pm 1.5)Omega` D. `(8 pm 3)Omega`
Description : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)`. If 0.2 A current is flowing throug
Last Answer : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)` ... . `3.2xx10^(-2)V//m` D. `1V//m`
Description : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is uniform, then the quantity that remains constant along th
Last Answer : When the rate of flow of charge through a metallic condoctor of non-uniform cross-section is ... . electric field C. electric potential D. current
Description : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section `6.0xx10^(-7) m^(2)` and its resistance is measured to be
Last Answer : A negligbly small current is passed through a wire of length 15 cm and uniform cross-section ` ... the material at the temperature of the experiment ?
Description : Shear deflection of a cantilever of length L, cross sectional area A and shear modulus G, subjected to w/m u.d.l., is (A) (3/4) (L²w/GA) (B) (3/2) (L²w/GA) (C) (2/3) (L3w/GA) (D) (3/2) (Lw/GA²)
Last Answer : (A) (3/4) (L²w/GA)
Description : is the pre-stressed force applied to the tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The maximum stress in the beam, subjected to a maximum bending moment , is (A) f = (P/A) + (Z/M) ... ) + (M/Z) (C) f = (P/A) + (M/Z) (D) f = (P/A) + (M/6Z)
Last Answer : Answer: Option C
Description : is the pre-stressed force applied to tendon of a rectangular pre-stressed beam whose area of cross section is and sectional modulus is . The minimum stress on the beam subjected to a maximum bending moment is (A) f = (P/A) - (Z/M) (B) f = (A/P) - (M/Z) (C) f = (P/A) - (M/Z) (D) f = (P/A) - (M/6Z)
Description : If 1 ampere current flows through 2m long conductor the charge flow through it in 1 hour will be a. 3600C b. 7200C c. 1C d. 2C
Last Answer : a. 3600C
Description : Total number of magnetic field lines passing through an area is called A. magnetic flux density B. magnetic flux C. e.m.f D. voltage
Last Answer : magnetic flux
Description : The discharge through an external mouthpiece is given by (where a = Cross-sectional area of the mouthpiece, and H = Height of liquid above the mouthpiece) (A) 0.855 a. gH) (B) 1.855 aH. g) (C) 1.585 a. gH) (D) 5.85 aH. g)
Last Answer : Answer: Option A