`1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.

`1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.
by

1 Answer

Answer :

`1kg` piece of copper is drawn into a wire `1mm` thick and another piece into a wire `2mm` thick. Compare the resistance of these wires.
by
selected by

Related questions

Four wires of the same material and dimensions as under are stretched by a load of same magnitude separately. Which of them will be elongated maximum? (a) wire of 3m length and 1.5 mm diameter (b) wire of 1m length and 2mm diameter (c) wire of 2m length and 2mm diameter (d) wire of 1m length and 1mm diameter

Description : Four wires of the same material and dimensions as under are stretched by a load of same magnitude separately. Which of them will be elongated maximum? (a) wire of 3m length and 1.5 mm diameter (b) ... and 2mm diameter (c) wire of 2m length and 2mm diameter (d) wire of 1m length and 1mm diameter

Last Answer : Ans:(a)

How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form

How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Description : How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Last Answer : C. 2mm

The gap between probing face and probing shoe should be. (i) 0.4 mm (ii) 0.2mm * (iii) 3mm (iv) 1mm.

Description : The gap between probing face and probing shoe should be. (i) 0.4 mm (ii) 0.2mm * (iii) 3mm (iv) 1mm.

Last Answer : (ii) 0.2mm *

The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber’s telephone set to another telephone set in an adjacent room B. a two-wire or four-wire communication circuit between the customer’s premise and central office C. a four-wire circuit connecting a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Description : The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber's telephone set to another telephone set in an adjacent room B. a two-wire or four- ... a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Last Answer : B. a two-wire or four-wire communication circuit between the customer’s premise and central office

Two copper wires A and B of equal masses are taken. The length of A is double the length of B. If the resistance of wire A is `160 Omega `, then calcu

Description : Two copper wires A and B of equal masses are taken. The length of A is double the length of B. If the resistance of wire A is `160 Omega `, then calcu

Last Answer : Two copper wires A and B of equal masses are taken. The length of A is double the length of ... Omega `, then calculate the resistance of the wire B.

Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Description : Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Last Answer : Ans:(d)

Copper wires are generally used for electrical power transmission instead of iron wire because (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Description : Copper wires are generally used for electrical power transmission instead of iron wire because (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Last Answer : (3) copper is a better conductor of electricity than iron Explanation: Copper is generally preferred for electrical power transmission instead of iron because of its high electrical conductivity and low resistivity.

Copper wires are generally used for electrical power transmission instead of iron wire because : (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Description : Copper wires are generally used for electrical power transmission instead of iron wire because : (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron 

Last Answer : copper is a better conductor of electricity than iron

A telephone wire 125m long and 1mm in radius is stretched to a length 125.25m when a force of 800N is applied.

Description : A telephone wire 125m long and 1mm in radius is stretched to a length 125.25m when a force of 800N is applied.

Last Answer : A telephone wire 125m long and 1mm in radius is stretched to a length 125.25m when a force of ... the value of Young's modulus for material of wire?

A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is

Description : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is

Last Answer : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V ... `4xx10^(-6)Omega-m` D. `1xx10^(-6)Omega-m`

If a fuse blows frequently, one should (a) replace it with a thin wire (b) replace it with a thick copper wire (c) replace it with a paper clip (d) call an electrician

Description : If a fuse blows frequently, one should (a) replace it with a thin wire (b) replace it with a thick copper wire (c) replace it with a paper clip (d) call an electrician

Last Answer : Ans:(d)

Two wires A and B of the same material have their lengths in the ratio `1 : 5` and diameters in the ratio ` 3 : 2`. If the resistance of the wire B is

Description : Two wires A and B of the same material have their lengths in the ratio `1 : 5` and diameters in the ratio ` 3 : 2`. If the resistance of the wire B is

Last Answer : Two wires A and B of the same material have their lengths in the ratio `1 : 5` and diameters in ... `180 Omega`, find the resistance of the wire A.

Assertion : Two resistance wires shown in figure are of same material. They have equal length. More heat is generated in wire A. Reason : In series `H

Description : Assertion : Two resistance wires shown in figure are of same material. They have equal length. More heat is generated in wire A. Reason : In series `H

Last Answer : Assertion : Two resistance wires shown in figure are of same material. They have equal length. More ... . If Assertion is false but Reason is true.

Two resistance wires on joining in parallel the resultant resistance is ohms `(6)/(5)` ohms. One of the wire breaks, the effective resistance is 2 ohm

Description : Two resistance wires on joining in parallel the resultant resistance is ohms `(6)/(5)` ohms. One of the wire breaks, the effective resistance is 2 ohm

Last Answer : Two resistance wires on joining in parallel the resultant resistance is ohms `(6)/(5)` ohms. One of the wire ... ` C. `(6)/(5)Omega` D. `3Omega`

If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Description : If two wires of the same material have the same thickness but different length the blank wire will have greater resistance?

Last Answer : Materials

Copper and carbon wires are connected in series and the combined resistor is kept at `0^(@)C`. Assuming the combined resistance does not vary with tem

Description : Copper and carbon wires are connected in series and the combined resistor is kept at `0^(@)C`. Assuming the combined resistance does not vary with tem

Last Answer : Copper and carbon wires are connected in series and the combined resistor is kept at `0^(@)C`. Assuming the combined ... C)` A. 4 B. 8 C. 6 D. 2

Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Description : Rohan had learnt that non-metals on beating with hammer are generally broken into pieces. Which of the following is a non-metal? a) iron nail b)aluminium wire c)copper wire d)piece of coal

Last Answer : d)piece of coal

For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

Description : For an amalgam restoration of a weakened cusp you should, A. reduce cusp by 2mm on a flat base for more resistance B. reduce cusp by 2mm following the outline of the cusp C. reduce 2mm for retention form

Last Answer : A. reduce cusp by 2mm on a flat base for more resistance

Non-metals cannot be drawn into wires. Why ? [DAV2008] -Science

Description : Non-metals cannot be drawn into wires. Why ? [DAV2008] -Science

Last Answer : Non-metals are not ductile, therefore they cannot be drawn into wires.

If a metal can be drawn into wires relatively easily it is called: (1) malleable (2) ductile (3) extractive (4) tactile

Description : If a metal can be drawn into wires relatively easily it is called: (1) malleable (2) ductile (3) extractive (4) tactile

Last Answer : (2) ductile Explanation: Ductility is a physical property of a material associated with the ability to be hammered thin or stretched into wire without breaking.

A material is called 'ductile', if it can be (A) Drawn into wires (B) Hammered to a thin sheet (C) Fractured without deformation (D) Made lustrous by heating it

Description : A material is called 'ductile', if it can be (A) Drawn into wires (B) Hammered to a thin sheet (C) Fractured without deformation (D) Made lustrous by heating it

Last Answer : (A) Drawn into wires

Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

If a metal can be drawn into wires relatively easily it is called: w) malleable x) ductile y) extractive z) tactile

Description : If a metal can be drawn into wires relatively easily it is called: w) malleable x) ductile y) extractive z) tactile

Last Answer : ANSWER: X -- DUCTILE

The property of materials by which they can be drawn into wires is known as:

Description : The property of materials by which they can be drawn into wires is known as: A) malleability B) elasticity C) creep D) ductility

Last Answer : The property of materials by which they can be drawn into wires is known as: ductility

A wire of resistance `10 Omega` is drawn out so that its length is thrice its original length. Calculate its new resistance (resistivity and density o

Description : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original length. Calculate its new resistance (resistivity and density o

Last Answer : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original ... (resistivity and density of the material remain uncharged).

The arrow drawn through the resistor shown in the illustration indicates that it is _____________. EL-0086 A. for use in low power applications B. a carbon composition type C. a wire-wound type D. one whose resistance is variable

Description : The arrow drawn through the resistor shown in the illustration indicates that it is _____________. EL-0086 A. for use in low power applications B. a carbon composition type C. a wire-wound type D. one whose resistance is variable

Last Answer : Answer: D

A drawn wire of resistance 5 Q is further drawn so that its diameter becomes one-fifth of the original. ...

Description : A drawn wire of resistance 5 Ω is further drawn so that its diameter becomes one-fifth of the original. What is its resistance with volume remaining the same ? (a) 25 Ω (b) 125 Ω (c) 625 Ω (d) 3125 Ω

Last Answer : A drawn wire of resistance 5 Ω is further drawn so that its diameter becomes one-fifth of the original. What is its resistance with volume remaining the same ? (a) 25 Ω (b) 125 Ω (c) 625 Ω (d) 3125 Ω

A COPPER strip is placed in one compartment of a voltaic cell and a wire connects this strip to a piece of metal in the other compartment through a voltmeter. If the voltmeter reads zero, the other piece of metal is: w) zinc x) mercury y) silver z) copper

Description : A COPPER strip is placed in one compartment of a voltaic cell and a wire connects this strip to a piece of metal in the other compartment through a voltmeter. If the voltmeter reads zero, the other piece of metal is: w) zinc x) mercury y) silver z) copper

Last Answer : ANSWER: Z -- COPPER

Ultimate strength of cold drawn high steel wires (A) Increases with increase in diameter of bar (B) Decreases with increase in diameter of bar (C) Does not depend on diameter of bar (D) None of the above

Description : Ultimate strength of cold drawn high steel wires (A) Increases with increase in diameter of bar (B) Decreases with increase in diameter of bar (C) Does not depend on diameter of bar (D) None of the above

Last Answer : Answer: Option B

Which of the following has high tensile strength? (A) Plain hot rolled wires (B) Cold drawn wires (C) Heat treated rolled wires (D) All have same tensile strength

Description : Which of the following has high tensile strength? (A) Plain hot rolled wires (B) Cold drawn wires (C) Heat treated rolled wires (D) All have same tensile strength

Last Answer : Answer: Option B

A piece of wire of resistance 4 ohm s is bent through `180^(@)` at its mid point and the two halves are twisted together, then the resistance is

Description : A piece of wire of resistance 4 ohm s is bent through `180^(@)` at its mid point and the two halves are twisted together, then the resistance is

Last Answer : A piece of wire of resistance 4 ohm s is bent through `180^(@)` at its mid point and the two halves ... `8Omega` B. `1Omega` C. `2Omega` D. `5Omega`

How can Ohm law be used to calculate the electrical resistance of a piece of wire?

Description : How can Ohm law be used to calculate the electrical resistance of a piece of wire?

Last Answer : Ohm's law establishes the relationship between the current flowing in a conductor (represented by I), the potential difference across the two ends of the conductor (represented by P), and the resistance offered ... all materials. This is not true, as it only applies to 'linear' or 'ohmic' materials.

Two wires of different materials have resistances in the ratio `4 : 3`, lengths in the ratio `2 : 1` but have same radii of cross-section. Compare the

Description : Two wires of different materials have resistances in the ratio `4 : 3`, lengths in the ratio `2 : 1` but have same radii of cross-section. Compare the

Last Answer : Two wires of different materials have resistances in the ratio `4 : 3`, lengths in the ... same radii of cross-section. Compare their resistivities.

Two wires of the same material have resistances in the ratio ` 16 : 81` and lengths in the ratio ` 1 : 4`. Compare their radii of cross-section.

Description : Two wires of the same material have resistances in the ratio ` 16 : 81` and lengths in the ratio ` 1 : 4`. Compare their radii of cross-section.

Last Answer : Two wires of the same material have resistances in the ratio ` 16 : 81` and lengths in the ratio ` 1 : 4`. Compare their radii of cross-section.

A composite wire is prepared by joining a tungsten wire and steel wire end to end. Both the wires are of the same

Description : A composite wire is prepared by joining a tungsten wire and steel wire end to end. Both the wires are of the same

Last Answer : A composite wire is prepared by joining a tungsten wire and steel wire end to end. Both the wires are of ... 1011 Pa, YTungsten = 4.11 1011 Pa]

On meter length of wires carriers a constant current. The wire is bent to from a circular loop. The magnetic field at the centre of this loop is `B`.

Description : On meter length of wires carriers a constant current. The wire is bent to from a circular loop. The magnetic field at the centre of this loop is `B`.

Last Answer : On meter length of wires carriers a constant current. The wire is bent to from a circular loop. The magnetic field at ... B. `4B` C. `B/4` D. `16B`

Two identical conducting wires `AOB and COD` are placed at right angles to each other. The wire `AOB` carries an electric current `I_(1) and COD` carr

Description : Two identical conducting wires `AOB and COD` are placed at right angles to each other. The wire `AOB` carries an electric current `I_(1) and COD` carr

Last Answer : Two identical conducting wires `AOB and COD` are placed at right angles to each other. The wire `AOB` carries an electric ... )^(2)+I_(2)^(2))^(1//2)`

Three long, straight and parallel wires are arranged as shown in Fig. The forces experienced by 10 cm length of wire Q is

Description : Three long, straight and parallel wires are arranged as shown in Fig. The forces experienced by 10 cm length of wire Q is

Last Answer : Three long, straight and parallel wires are arranged as shown in Fig. The forces experienced by 10 cm length ... D. `2.6xx10^(-4)`N towards the left

Figure shows, three long straight wires parallel and equally speed with identical currents. Then, the force acting on each wire due to the other is

Description : Figure shows, three long straight wires parallel and equally speed with identical currents. Then, the force acting on each wire due to the other is

Last Answer : Figure shows, three long straight wires parallel and equally speed with identical currents. Then, the force acting on ... `F_(b) gt F_(a) gt F_(c)`

Currents of `10A, 2A` are passed through two parallel wires `A` and `B` respectively in opposite directions. If the wire `A` is infinitely long and th

Description : Currents of `10A, 2A` are passed through two parallel wires `A` and `B` respectively in opposite directions. If the wire `A` is infinitely long and th

Last Answer : Currents of `10A, 2A` are passed through two parallel wires `A` and `B` respectively in opposite directions. If the ... `4xx10^(-7)N` D. `8xx10^(-7)N`

Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each wire carries a current I, respec

Description : Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each wire carries a current I, respec

Last Answer : Two infinitely long, thin, insulated, straight wires lie in the x-y plane along the x- and y- axis respectively. Each ... x C. y = x-1 D. y = -x+1

Two uniform wires `A` and `B` are of the same total metal and have equal masses. The radius of wire `A` is twice that of wire `B`. The total resistanc

Description : Two uniform wires `A` and `B` are of the same total metal and have equal masses. The radius of wire `A` is twice that of wire `B`. The total resistanc

Last Answer : Two uniform wires `A` and `B` are of the same total metal and have equal masses. The radius of ... `5Omega` when the resistance of wire B is `4Omega`

i heard that flat speaker wires can carry more watts to the speakers, where online can i find some of this speaker wire?

Description : i heard that flat speaker wires can carry more watts to the speakers, where online can i find some of this speaker wire?

Last Answer : They have audio outlets online through simple searching including Radioshack in which they offer very good prices.

__________ is an interface for connecting eight or more data wires. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Description : __________ is an interface for connecting eight or more data wires. A. Serial Port B. Fire wire C. Parallel Port D. None of the Above

Last Answer : C. Parallel Port

Which of the following statements is correct concerning the circuits in a sound powered telephone system? A. The ringing circuit is composed of only one common wire to ground. B. The common talking circuit is composed of two ungrounded wires. C. The ringing circuit has two grounded wires connected to each station. D. The talking and calling circuits are electrically dependent upon each other.

Description : Which of the following statements is correct concerning the circuits in a sound powered telephone system? A. The ringing circuit is composed of only one common wire to ground. B. The common ... connected to each station. D. The talking and calling circuits are electrically dependent upon each other.

Last Answer : Answer: B

In prestressing work, if more than one wire or strand is included in the same duct, why should all wires/strands be stressed at the same time?

Description : In prestressing work, if more than one wire or strand is included in the same duct, why should all wires/strands be stressed at the same time?

Last Answer : If wires/strands are stressed individually inside the same duct, then those stressed strand/wires will bear against those unstressed ones and trap them. Therefore, the friction of the trapped wires is high and is undesirable.

The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Description : The greatest induced EMF will occur in a straight wire moving at constant speed through a uniform magnetic field when the angle between the direction of the wire's motion and the direction of the magnetic field is w) 0 degrees x) 30 degrees y) 60 degrees z) 90 degrees

Last Answer : ANSWER: Z -- 90 DEGREES

What is resistance of copper compare to the aluminium?

Description : What is resistance of copper compare to the aluminium?  

Last Answer : Copper is less resistive than aluminium.  

A copper wire has a resistance of \( 0.60 hm \). Anozner copper wire of the samemass as the first one is dou ble in length of the first. Find the resistance of the second wire.

Description : A copper wire has a resistance of \( 0.60 hm \). Anozner copper wire of the samemass as the first one is dou ble in length of the first. Find the resistance of the second wire.

Last Answer : A copper wire has a resistance of \( 0.6 0hm \). Another copper wire of the same mass as ... of the first. Find the resistance of the second wire.