Description : ______________ was developed in the year 1996 by ATMEL Corporation A. PIC B. AVR C. ARM D. ASIC
Last Answer : B. AVR
Description : ______________ is the smallest microcontrollers which can be programmed to perform a large range of tasks. A. PIC microcontrollers B. ARM microcontrollers C. AVR microcontrollers D. ASIC microcontrollers
Last Answer : A. PIC microcontrollers
Description : ASIC chip is A. Simple in design. B. Manufacturing time is less. C. It is faster. D. Both A&C.
Last Answer : C. It is faster.
Description : Main processor chip in computers is_______ A. ASIC B. ASSP C. CPU D. CPLD
Last Answer : C. CPU
Description : In microcontrollers, I2C stands for A. Inter-Integrated Clock B. Initial-Integrated Clock C. Intel-Integrated Circuit D. Inter-Integrated Circuit
Last Answer : D. Inter-Integrated Circuit
Last Answer : Integrated circuit design for particular application is known as Application Specific Integrated Circuit ASIC. ASIC have smaller size, less power consumption and less cost .
Description : ‘IC’ in computers stands for (1) Integrated Charge (2) Integrated Current (3) Integrated Circuits (4) Internal Circuits
Last Answer : Integrated Circuits
Description : ___ sensors include thermocouples, thermistors, resistor temperature detectors (RTDs) and integratd circuits (ICs). A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Proximity Sensor
Last Answer : B. Temperature Sensor
Description : PaaS stands for_____ A. Platform as a Service B. Platform as a Survey C. People as a Service D. Platform as a Survey
Last Answer : A. Platform as a Service
Description : WSN stands for A. Wide Sensor Network B. Wireless Sensor Network C. Wired Sensor Network D. None of these
Last Answer : B. Wireless Sensor Network
Description : In Node MCU, MCU stands for_____. A. Micro Control Unit B. Micro Controller Unit C. Macro Control Unit D. Macro Controller Unit
Last Answer : B. Micro Controller Unit
Description : MQTT stands for _____________ A. MQ Telemetry Things B. MQ Transport Telemetry C. MQ Transport Things D. MQ Telemetry Transport
Last Answer : D. MQ Telemetry Transport
Description : 6LOWPAN stands for A. 6 LOW Personal Area Network B. IPv6 LOW Personal Area Network C. IPv6 over Low power wireless personal area network D. None of above
Last Answer : C. IPv6 over Low power wireless personal area network
Description : IIOT stands for A. Information Internet of Things B. Industrial Internet of Things C. Inovative Internet of Things D. None of above
Last Answer : B. Industrial Internet of Things
Description : AVR stands for_____________________. A. Advanced Virtual RISC. B. Alf-Egil Bogen and Vegard Wollan RISC C. Both A & B D. None of the above
Last Answer : C. Both A & B
Description : ARM stands for _________ A. Advanced RISC Machine B. Advanced RISC Methodology C. Advanced Reduced Machine D. Advanced Reduced Methodology
Last Answer : A. Advanced RISC Machine
Description : How power supply is done to RPi? A. USB connection B. Internal battery C. Charger D. Adapter
Last Answer : A. USB connection
Description : Does RPi have an internal memory? A. True B. False
Last Answer : A. True
Description : MSI stands for A) Medium Scale Integrated Circuits B) Medium System Integrated Circuits C) Medium Scale Intelligent Circuit D) Medium System Intelligent Circuit
Last Answer : Answer : A
Description : MSI stands for a. Medium Scale Integrated Circuits b. Medium System Integrated Circuits c. Medium Scale Intelligent Circuit d. Medium System Intelligent Circuit
Last Answer : Medium Scale Integrated Circuits
Description : MSI stands for a) Medium Scale Integrated Circuits b) Medium System Integrated Circuits c) Medium Scale Intelligent Circuit d) Medium System Intelligent Circuit
Last Answer : a) Medium Scale Integrated Circuits
Last Answer : b. Medium System Integrated Circuits
Last Answer : a. Medium Scale Integrated Circuits
Description : Which layer is called a port layer in OSI model? a. Session b. Application c. Presentation d. Transport
Last Answer : a. Session
Description : ______ offering provides the tools and development environment to deploy applications on another vendor’s application. A. PaaS B. IaaS C. CaaS D. All of the mentioned
Last Answer : B. IaaS
Description : Security based connection is provided by which layer? A. Application layer B. Transport layer C. Session layer D. Network layer
Last Answer : D. Network layer
Description : TCP and UDP are called? A. Application protocols B. Session protocols C. Transport protocols D. Network protocols
Last Answer : C. Transport protocols
Description : Services provided by application layer? A. Web chat B. Error control C. Connection services D. Congestion control
Last Answer : A. Web chat
Description : ______________ is useful for time-sensitive application that have very small data units to exchange and do not want the overhead of connection setup. A. TCP B. UDP C. Transport layer D. None of the above.
Last Answer : B. UDP
Description : The ___ protocols define how the applications interface with the lower layer protocol to send the data over the network. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : A. Application layer
Description : ____________ protocols provide end to end message transfer capability independent of the underlying network. A. Network layer B. Transport layer C. Application layer D. Link layer
Last Answer : B. Transport layer
Description : ___ layer perform the host addressing and packet routing. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : C. Network layer
Description : ______ layer is responsible for sending of IP datagrams from the source network to the destination network. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : The correct answer is: C. Network layer The network layer is responsible for routing and forwarding IP datagrams from the source network to the destination network. It provides logical addressing ... at the network layer include IP (Internet Protocol) and ICMP (Internet Control Message Protocol).
Description : _____________ layer protocols determine how the data is physically sent over the network’s physical layer or medium. A. Application layer B. Transport layer C. Network layer D. Link layer
Last Answer : D. Link layer
Description : ____ sensor is used for automatic door controls, automatic parking system, automated sinks, automated toilet flushers, hand dryers. A. Smoke Sensor B. Temperature Sensor C. IR Sensor D. Motion Sensor
Last Answer : D. Motion Sensor
Description : Which of the following is an (are) example(s) of an embedded system for signal processing? A. Apple iPOD (media player device) B. SanDisk USB mass storage device C. Both (A) and (B) D. None of these
Last Answer : D. None of these
Description : A digital multi meter is an example of an embedded system for A. Data communication B. Monitoring C. Control D. All of these E. None of these
Last Answer : B. Monitoring
Description : What are the essential tight constraint/s related to the design metrics of an embedded system? A. Ability to fit on a single chip B. Low power consumption C. Fast data processing for real-time operations D .All of the above
Last Answer : D .All of the above
Description : Which of the following is (are) example(s) of embedded system for data communication? USB Mass Storage device A. Network router B. Digital camera C. Music player D. All of these E. None of these
Last Answer : B. Digital camera
Description : The first mass produced embedded system is A. Minuteman-I B. Minuteman-II C. Autonetics D-17 D. Apollo Guidance Computer (AGC)
Last Answer : C. Autonetics D-17
Description : The first recognized modern embedded system is A. Apple computer B. Apollo Guidance Computer (AGC) C. Calculator D. Radio navigation system
Last Answer : B. Apollo Guidance Computer (AGC)
Description : Which of the following is not an example of a “small-scale embedded system”? A. Electronic Barbie doll B. Simple calculator C. Cell phone D. Electronic toy car
Last Answer : Electronic barbie doll
Description : Which of the following is not true about embedded systems? A. Built around specialized hardware B. Always contain an operating system C. Execution behavior may be deterministic D. All of these E. None of these
Last Answer : E. None of these
Description : Embedded system is______ A. An electronic system B. A pure mechanical system C. An electro-mechanical system D. (A) or (C)
Last Answer : D. (A) or (C)
Description : Which is the part of Data Link Layer: a. LLC b. MAC c. Both a and b d. None of these
Last Answer : c. Both a and b
Description : Which IEEE standard is developed for CSMA/CD a. IEEE 802.1 b. IEEE 802.2 c. IEEE 802.3 d. IEEE 802.4
Last Answer : c. IEEE 802.3
Description : Which multiple access technique is used by IEEE 802.11 standard for wireless LAN? a. ALOHA b. CSMA/CA c. CDMA d. none of the mentioned
Last Answer : b. CSMA/CA
Description : MQTT is: a. Based on client-server architecture b. Based on publish-subscribe architecture c. Based on both of the above d. Based on none of the above
Last Answer : b. Based on publish-subscribe architecture
Description : HTTP resources are located by a. unique resource locator b. unique resource identifier c. none of the mentioned d. uniform resource identifier
Last Answer : d. uniform resource identifier
Description : .Frequency band used by 802.11 ah standard is: a. 60 GHz b. 2.4 GHz c. Sub 1 GHz d. 5 GHz
Last Answer : c. Sub 1 GHz