Turbine used for low head is?

by

1 Answer

Answer :

Turbine used for low head is Kaplan turbine.

by

Related questions

How to Build a Wind Turbine

Description : How to Build a Wind Turbine

Last Answer : How to Build a Wind Turbine How to Build a Wind Turbine A wind turbine is nothing but a simple turbine set up in open space, which utilizes the mechanical energy of air, or ... While placing the turbines in multiple numbers, one should also bother about their placements and relative directions.

How to Build a Water Turbine

Description : How to Build a Water Turbine

Last Answer : How to Build a Water Turbine You might think only professional engineers can create water turbines. The truth is, you can make your own water-propelled turbine using simple materials you can find ... can power equipment or charge batteries. Step back and watch your water turbine masterpiece at work.

With a neat diagram explain pelton wheel turbine.

Description : With a neat diagram explain pelton wheel turbine.

Last Answer : Diagram of Pelton Wheel:-  Construction of Pelton Wheel Turbine:  1. Runner with Bucket: The runner of a pelton turbine consists of a number of double cupped buckets surrounded ... necessary to avoid accidents, splashing race and to support the housing for the bearing and the nozzle. 

With a neat diagram, explain back pressure steam turbine co-generation system.

Description : With a neat diagram, explain back pressure steam turbine co-generation system.

Last Answer : Back pressure steam turbine co-generation system: In this type steam enters the turbine chamber at High Pressure and expands to Low or Medium Pressure. Enthalpy difference is used for generating power / work. ... , the overall thermal efficiency of the system could reach as much as 90 percent.

With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Description : With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Last Answer : (i) Steam turbine co-generation system: The two types of steam turbines most widely used are the backpressure and the extraction. Another variation of the steam turbine topping ... power. The exhaust or the extracted steam from the steam turbine provides the required thermal energy.

In steam turbine terminology, diaphragm refers to

Description : In steam turbine terminology, diaphragm refers to  (1) separating wall between rotors carrying nozzles (2) the ring of guide blades between rotors (3) a partition between low and high pressure sides (4) the flange connecting the turbine exit to the condenser

Last Answer : In steam turbine terminology, diaphragm refers to separating wall between rotors carrying nozzles 

Reheating in a gas turbine

Description : Reheating in a gas turbine (1) increases the compressor work (2) decreases the compressor work (3) increases the turbine work (4) decreases the turbine work

Last Answer : Reheating in a gas turbine increases the turbine work

The use of regenerator in a gas turbine cycle

Description : The use of regenerator in a gas turbine cycle  (1) increases efficiency but has no effect on output (2) increases output but has no effect on efficiency (3) increases both efficiency and output (4) increases efficiency but decreases output

Last Answer : The use of regenerator in a gas turbine cycle increases efficiency but has no effect on output

Compare variable head flow meter with variable area flow meter.

Description : Compare variable head flow meter with variable area flow meter.

Last Answer : Parameter Variable head flowmeter Variable area flowmeter Working principle Restriction or obstacle is placed in the path of flow to create a differential Pressure. The pressure ... viscous fluid slurries and dirty fluids. In laboratories and testing and production lines.

Carvin V3 head switches channels on it's own. Any ideas?

Description : Carvin V3 head switches channels on it's own. Any ideas?

Last Answer : Poltergeist?

Anyone here ever hit their head so hard that you felt your brain bump?

Description : Anyone here ever hit their head so hard that you felt your brain bump?

Last Answer : I've done it once, when I hit my head directly in the center of my temple. I could have sworn, like you, that I could feel my brain hit the opposite side of my head. That reminds me that I hit my ... closest thing to me, which happened to be my bed, out of pure instinct. It hurt like a mother*@#*&#!

Does nodding your head up and down universally mean "yes"?

Description : Does nodding your head up and down universally mean "yes"?

Last Answer : answer:“In many cultures, it is most commonly, but not universally, used to indicate agreement, acceptance, or acknowledgment.” http://en.wikipedia.org/wiki/Nod_(gesture)

How to Get Rid of Head Lice

Description : How to Get Rid of Head Lice

Last Answer : How to Get Rid of Head Lice You have probably heard of lice, but have you heard of a louse? Lice are simply a group of tiny bugs that often get into people's hair. A louse is a tiny, ... bedding in the washer's hottest setting. Shave, wash, and comb out any areas that pubic lice have affected.

How to Fix a Leaky Shower Head

Description : How to Fix a Leaky Shower Head

Last Answer : How to Fix a Leaky Shower Head It's annoying when your shower head leaks, disrupting your bath time regimen. It can be a pain in the neck, but instead of buying a new one, there's ... repair a leaking shower head. You'll soon find yourself bathing comfortably under a well-functional shower fixture.

How to Clean a Shower Head

Description : How to Clean a Shower Head

Last Answer : How to Clean a Shower Head We take showers to remove dirt from our bodies, but what if the dirt itself comes from the shower? If not cleaned and maintained properly, mineral deposits can build ... out of the bathroom squeaky clean every time. Try these simple steps and solve this problem with ease.

With a neat diagram explain medium head hydro-electric power plants.

Description : With a neat diagram explain medium head hydro-electric power plants. 

Last Answer : Diagram of medium head hydro-electric power plants:  Explanation:- If head of water is between 30 and 100 m, the plant is called a medium-head plant. Potential energy of ... Francis turbines are normally used. Alternator required in these plants is of low speed and large in diameter. 

The surge impedance for over head line is taken as

Description : The surge impedance for over head line is taken as  (1) 10-20 ohms (2) 50-60 ohms (3) 100-200 ohms (4) 1000-2000 ohms

Last Answer : The surge impedance for over head line is taken as 100-200 ohms

Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Description : Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Last Answer : Methods for measurement of low resistance:  1. Ammeter voltmeter method  2. Kelvin's bridge method  3. Ohm meter method  4. Potentiometer method  5. Digital/analog multi-meter ... must be infinity for perfectly accurate measurement which is not possible.  2. Connection errors.

Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Description : Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Last Answer : Following are the methods used to measure resistances:-  (i) Low resistance: 1.Voltmeter-Ammeter Method 2. Kelvin's Double bridge Method  (ii) Medium resistance: 1.Voltmeter-Ammeter Method 2. ... of Charge Method  (iv) Earth resistance : 1. Fall of Potential Method 2. Earth tester

State the range for low and medium resistance.

Description : State the range for low and medium resistance.

Last Answer : Low resistances: less than 1 ohm.  Medium resistances: 1 ohm to 0.1 Mega ohm. 

Step-down transformer converts high voltage and low current into:

Description : Step-down transformer converts high voltage and low current into:  (A) How voltage and high current (B) High voltage and low current (C) Low voltage and high current (D) None of the above

Last Answer : Step-down transformer converts high voltage and low current into: Low voltage and high current

Which of the following is the least expensive protection for over current in low voltage system?

Description : Which of the following is the least expensive protection for over current in low voltage system?  (A) Rewireable fuse (B) Isolator (C) Oil Circuit breaker (D) Air break circuit breaker

Last Answer : Which of the following is the least expensive protection for over current in low voltage system?  (A) Rewireable fuse (B) Isolator (C) Oil Circuit breaker (D) Air break circuit breaker

At very low frequencies a series R-C circuit behaves as almost purely?

Description : At very low frequencies a series R-C circuit behaves as almost purely?

Last Answer : At very low frequencies a series R-C circuit behaves as almost purely capacitive.

In an AC. circuit, a low value of kVAR compared with kW indicates?

Description : In an AC. circuit, a low value of kVAR compared with kW indicates?

Last Answer : In an AC. circuit, a low value of kVAR compared with kW indicates high power factor.

The Don vs Ye: Who will fit that straitjacket better?

Description : The Don vs Ye: Who will fit that straitjacket better?

Last Answer : I just had a nightmare & I’m wide awake… The Don as president with Ye as VP. Just think of the crazy there when they start feeding off each others crazy!!! On the positive side, they would throw each other under the bus & hopefully fight amongst themselves & leave the rest of us alone!!!

How to Treat Low Blood Sugar ?

Description : How to Treat Low Blood Sugar ?

Last Answer : How to Treat Low Blood Sugar Low blood sugar or hypoglycemia is a condition usually experienced by diabetics but it's also possible to experience it without being a diabetic yourself. For diabetics, low ... identify the cause of the problem and help you get the proper treatment as soon as possible.

Low Fat Barbecue Chicken

Description : Low Fat Barbecue Chicken

Last Answer : Low Fat Barbecue Chicken Dinner 4 lg. chicken breasts, cubed 1 green pepper, cut up 1 onion, cut up 1/2 to 3/4 c. barbecue sauce 1 to 2 bags Minute Rice, boil-in-bags Put chicken with green ... rice in center of plate. Make a nest and put chicken in center of rice. Looks nice and tastes great.

Low-Calorie Dressing

Description : Low-Calorie Dressing

Last Answer : Low-Calorie Dressing - serves 6 salad dressing 1 6-ounce can vegetable or tomato juice 1 tbsp very finely chopped onion 1 tbsp very finely chopped celery 1 tbsp very finely chopped bell pepper ... , oregano, tarragon or herb seasoning for the parsley will give a range of flavored salad dressing.

In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the

Description : In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the (A) applied load (B) internal compensation (C) impedance of the source (D) power dissipation in the chip

Last Answer : In a 741 Op-Amp, there is 20 dB/decade fall-off starting at a relatively low frequency. This is due to the internal compensation

Accurate measurement of very low resistances is possible with

Description : Accurate measurement of very low resistances is possible with (A) Megger (B) Wheatstone Bridge (C) Kelvin’s Double Bridge (D) Wagner’s Earthing Device

Last Answer : Accurate measurement of very low resistances is possible with Kelvin’s Double Bridge

In a low power factor wattmeter the pressure coil is connected?

Last Answer : In a low power factor wattmeter the pressure coil is connected to the load side of the current coil.

A synchronous machine with low value of short-circuit ratio has?

Last Answer : A synchronous machine with low value of short-circuit ratio has lower stability limit.

The primary reason for low power factor is supply system is due to installation of?

Last Answer : The primary reason for low power factor is supply system is due to installation of induction motors.

A low utilization factor for a plant indicates that?

Last Answer : A low utilization factor for a plant indicates that plant is used for stand by purpose.

To protect most of the electrical equipment handling low power, the types of relays used are?

Last Answer : To protect most of the electrical equipment handling low power, the types of relays used are thermocouple, electronic and bimetallic.

The efficiency of a transformer, under heavy loads, is comparatively low because?

Description : The efficiency of a transformer, under heavy loads, is comparatively low because?

Last Answer : The efficiency of a transformer, under heavy loads, is comparatively low because copper loss becomes high in proportion to the output.

What is the definition of extra low voltage?

Description : What is the definition of extra low voltage?

Last Answer : Extra-low voltage (ELV) is an electricity supply voltage in a range which carries a low risk of dangerous electrical shock.

At which time power factor of the induction motor is low?

Description : At which time power factor of the induction motor is low?

Last Answer : The power factor of the inducction motor is low at the time of starting as compare to while the induction motor is running.

write short notes on Low-pass filter.

Description : write short notes on Low-pass filter.

Last Answer : low-pass filter (1) filter exhibiting frequency selective characteristic that allows low-frequency components of an input signal to pass from filter input to output unattenuated all high-frequency components are ... the bandwidth of the filter. A filter whose impulse response is a low-pass signal.

Why MOSFET is used for low power applications?

Last Answer : MOSFET have high current losses due to High on state resistance. Hence MOSFET is used for low power applications.

State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them.

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Last Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

State the material used for making (1) Magnetic Core (2) Fuse element

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Last Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

State different types of holders used in wiring installation.

Description : State different types of holders used in wiring installation.

Last Answer : Following types of holders used in wiring installation: 1. Pendent Holder 2. Batten Holder 3. Angle holder 4. Screwed holder 

State properties of conductor material used for overhead conductor.

Description : State properties of conductor material used for overhead conductor. 

Last Answer : Following are the properties of conductor material:-   1. High conductivity :- Material should have high conductivity 2. High mechanical strength:- Material should have sufficiently high mechanical strength ... available & less costly. 9. Scrap Value: - Material should have high scrap value. 

Give the classification of the errors used in measuring instrument & state the reason for their occurrence.

Description : Give the classification of the errors used in measuring instrument & state the reason for their occurrence.

Last Answer : Types of errors in measuring instruments:  A) Gross error: These are due to mistakes on the part of person using the instrument.  B) Systematic Error:  i) Instrumental Error: These ... multiplying factor.  C) Random error: These persist even after gross and systematic errors are removed. 

Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

Description : Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

Last Answer : (i) Material used for Moving coil: Copper, Aluminum( some times)  (ii) Permanent magnets are made of special alloys such as :  Aluminum-Nickel-Cobalt (Alnicos)  Strontium-Iron  Neodymium-Iron-Boron  Samarium-Cobalt.

State the use of shunt and series resistance used in extension of meter.

Description : State the use of shunt and series resistance used in extension of meter.

Last Answer : Use of shunt and series resistance: i) Use of shunt: To extend the range of Ammeter. ii) Use of series resistance: To extend the range of Voltmeter.

State the material used for moving coil and former for PMMC instruments.

Description : State the material used for moving coil and former for PMMC instruments. 

Last Answer : Material Used for Moving Coil and Former for PMMC Instruments:  Material used for moving coil: Copper  Material used for Former: Aluminium

Why common emitter configuration is commonly used?

Description : Why common emitter configuration is commonly used?

Last Answer : Common emitter configuration is commonly used for amplifications because 1. The common emitter configuration (CE) provides maximum voltage and current gain and hence provides maximum power gain. The ... automatic impedance matching maximum power transfer will take place from one stage to other.