Description : 25 mL of household bleach solution was mixed with 30 mL of o.50 M Kl and 10 mL of 4N acetic acid. In the titration of the liberated iodine, 48 mL of 0
Last Answer : 25 mL of household bleach solution was mixed with 30 mL of o.50 M Kl and 10 mL of 4N acetic acid. In the titration ... B. 0.96 M C. 0.24 M D. 0.024 M
Description : 25 mL of a solution of `Fe^(2+)` ions was titrated with a solution of the oxidizing agent `Cr_(2)O_(7)^(2-)` . 50 mL of 0.01 M `K_(2)Cr_(2)O_(7)` solu
Last Answer : 25 mL of a solution of `Fe^(2+)` ions was titrated with a solution of the oxidizing agent `Cr_(2)O_ ... is the molarity of the `Fe^(2+)` solution ?
Description : Air can oxidize sodium sulphite in eq. solution but cannot do so in the case of sodium arsenite. If however, air is passed through a solution containi
Last Answer : Air can oxidize sodium sulphite in eq. solution but cannot do so in the case of sodium ... Negative catalysis C. Induced catalysis D. Auto catalysis
Description : Doctor's solution used for sweetening of petroleum products is (A) Sodium plumbite (B) Sodium sulphite (C) Sodium thiosulphate (D) Lead sulphate
Last Answer : (A) Sodium plumbite
Description : How many mL of 0.3M `K_(2)Cr_(2)O_(7)` (acidic) is required for complete oxidation of 5 mL of 0.2 M `SnC_(2)O_(4)` solution.
Last Answer : How many mL of 0.3M `K_(2)Cr_(2)O_(7)` (acidic) is required for complete oxidation of 5 mL of 0.2 M `SnC_(2)O_(4)` solution.
Description : Acetaldehyde on reaction with sodium hydrogen sulphite produces
Last Answer : Acetaldehyde on reaction with sodium hydrogen sulphite produces A. B. C. D.
Description : 25 ml of the given HCl solution requires 30 mL of 0.1M sodium carbonate solution. What is the volume of this HCl solution required to titrate 30 mL of
Last Answer : 25 ml of the given HCl solution requires 30 mL of 0.1M sodium carbonate solution. What is the volume of this HCl ... 5 mL B. 75 mL C. 50 mL D. 25 mL
Description : To a 25 mL `H_(2)O_(2)` solution excess acidified solution of Kl was added. The iodine liberated 20 ml of 0.3 N sodium thiosulphate solution. Use thes
Last Answer : To a 25 mL `H_(2)O_(2)` solution excess acidified solution of Kl was added. The iodine liberated 20 ml of ... strength of `H_(2)O_(2)` is 1.344 L
Description : 10g sample of bleaching powder was dissolved into water to make the solution one litre. To this solution 35 mL of 1.0 M Mohr salt solution was added c
Last Answer : 10g sample of bleaching powder was dissolved into water to make the solution one litre. To this solution 35 ... Cl_(2)` approximately is (mol wt = 71)
Description : `25ml` of a `0.1(M)` solution of a stable cation of transition metal `z` reacts exactly with `25 ml` of `0.04(M)` acidified `KMnO_(4)` solution. Which
Last Answer : `25ml` of a `0.1(M)` solution of a stable cation of transition metal `z` reacts exactly with `25 ml` of `0.04 ... 3+)rarrZ^(4+)` D. `Z^(2+)rarrZ^(4+)`
Description : 1.250 g of metal carbonate `(MCO_(3))` was treated with 500 mL of 0.1 M HCl solution. The unreacted HCl required 50.0 mL of 0.500 M NaOH solution for
Last Answer : 1.250 g of metal carbonate `(MCO_(3))` was treated with 500 mL of 0.1 M HCl solution. The unreacted HCl ... the metal M A. Mg B. Ca C. Sr D. Ba
Description : The volume (in ml) of 0.5 M NaOH required for the complete reaction with 150 ml of 1.5M `H_(3)PO_(3)` solution is
Last Answer : The volume (in ml) of 0.5 M NaOH required for the complete reaction with 150 ml of 1.5M `H_(3)PO_(3)` solution is A. 1350 B. 900 C. 1250 D. 1150
Description : From separate solution of four sodium salt NaW, Nax, NaY and NaZ had pH 7.0 , 9.0 , 10 . 0 and 11.0 respectively , when each solution was 0.1 M , the
Last Answer : From separate solution of four sodium salt NaW, Nax, NaY and NaZ had pH 7.0 , 9.0 , 10 . 0 and 11.0 ... acid is :- A. HW B. HX C. HY D. HZ
Description : In which of the following cases, the element is oxidised into its highest oxidation state when it reacted with ozone under moist condition.
Last Answer : In which of the following cases, the element is oxidised into its highest oxidation state when it reacted with ozone under ... S B. `I_(2)` C. P D. As
Description : Washing soda is - (1) sodium sulphite (2) sodium bicarbonate (3) sodiun carbonate (4) sodium biosulphite
Last Answer : (3) sodiun carbonate Explanation: Sodium carbonate (also known as washing soda, soda ash and soda crystals, and in the monohydrate form as crystal carbonate), Na2CO3, is the water-soluble sodium salt of carbonic acid.
Description : Corrosion in boilers can be prevented by (A) Deaeration of feed water (B) Enhancing pH of feed water by adding alkali (C) Feeding sodium sulphite or hydrazine phosphate to the boilers, which combines with oxygen and prevents corrosion (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Chemical name of Grignard reagent is (A) Sodium thiosulphate (B) Ethyl magnesium chloride (C) Sodium sulphite (D) Sodium bicarbonate
Last Answer : (B) Ethyl magnesium chloride
Description : Cooking liquor in case of sulphite process is (A) Sodium sulphite and sodium bisulphite (B) Magnesium sulphite and free SO2 in acid medium (C) Magnesium sulphate and magnesium bicarbonate (D) None of these
Last Answer : (A) Sodium sulphite and sodium bisulphite
Description : In Kraft process of paper manufacture, white cooking liquor consists of caustic soda (A) Sodium sulphide & sodium carbonate (B) Sodium sulphite & sodium carbonate (C) Sodium sulphite & sodium sulphide (D) None of these
Last Answer : (A) Sodium sulphide & sodium carbonate
Description : The most commonly used chemical for de-chlorination of water, is (A) Sodium thiosulphate (B) Sodium bisulphate (C) Sodium sulphite (D) Sulphur-dioxide
Last Answer : (C) Sodium sulphite
Description : If you were asked to add 50 mL of a stock solution to a reaction vessel which piece of glassware would you use to obtain this volume of solution?
Last Answer : You can use a graduated cylinder or a pipette of 50 mL.
Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000
Last Answer : (C) 600
Description : a) 110 g of salt is present in 550g of solution. Calculate the concentration of solution. b) 10 ml of H2SO 4 is dissolved in 90 ml of H2O. Calculate the concentration of solution. -Chemistry
Last Answer : The concentration of salt is determined by the division of mass of the solute by the mass of the solution and the percentage is obtained by multiplying the value by 100. The quotient of the division of 110 by 550 is 0.2 here. So after multiplying it with 100, it is 20%. So the concentration is 20%.
Description : in titration of 25 mL of the solution containing Cu2+ with the concentration of 0.01 molar , with SCN – (0.01 Molar) , if we use the indicator that changed its color in PSCN= 9. Calculate the error of titration PKSP(CuSCN) =13.4?
Last Answer : just the color change from the indicator. Thus, a careful selection of the indicator will reduce the indicator error. For example, if the equivalence point is at a pH of 8.4, then the ... are in the range of aqueous pH changes are of little use. Instead, the titrant and indicator used
Description : Take a 250 mL beaker/glass tumbler. Fill half of it with water. Now carefully cut a small piece of sodium metal. Dry it using filter paper and wrap it in a small piece of cotton. Put the sodium piece wrapped in cotton into the beaker. Observe carefully. -Science
Last Answer : On touching the beaker, it was felt hot. The solution turns the red litmus paper to blue which shows it is basic in nature. Blue litmus paper do not show any colour change with the solution.
Description : 3 gram of activated charcoal was added to 50 mL of acetic acid solution (0.06N) in a flask. After an hour it was filtered and the strength of the fitr
Last Answer : 3 gram of activated charcoal was added to 50 mL of acetic acid solution (0.06N) in a flask. After an hour it was ... B. `36 mg` C. `42 mg` D. `54 mg`
Description : Sulphide ion reacts with `[Fe(CN)_(5)NO]` to form a purple coloured compound (X). In this reaction oxidation state of iron .
Last Answer : Sulphide ion reacts with `[Fe(CN)_(5)NO]` to form a purple coloured compound (X). In this reaction ... . changes from +2 to +4 D. does not change.
Description : What is the molarity of 5.60 mol of sodium carbonate in 1500 ml of solution?
Last Answer : Molarity = moles of solute/Liters of solution ( 1500 mL = 1.5 Liters ) Molarity = 0.800 moles NaOH/1.5 Liters = 0.533 M sodium hydroxide ...
Description : If the total amount of a drug present in the body at a given moment is 2.0 g and its plasma concentration is 25 μg/ml, its volume of distribution is: A. 100 L B. 80 L C. 60 L D. 50 L
Last Answer : B. 80 L
Description : 2 If the total amount of a drug present in the body at a given moment is 2.0 g and its plasma concentration is 25 μg/ml, its volume of distribution is: A. 100 L B. 80 L C. 60 L D. 50 L
Description : If the total amount of a drug present in the body at a given moment is 2.0 g and its plasma concentration is 25 μ g/ml, its volume of distribution is: A. 100 L B. 80 L C. 60 L D. 50 L
Description : 100 mL of 0.3 M acetic acid is shaken with 0.8 g wood charcoal. The final concentration of acetic acid in the solution after adsorption is 0.125 M. Th
Last Answer : 100 mL of 0.3 M acetic acid is shaken with 0.8 g wood charcoal. The final concentration of acetic acid in the ... g` C. `1.31 g` D. `0.131 g`
Description : What volume in mL of a 0.10 M NaOH solution would be required to neutralize 0.0091 moles of CH3COOH in a given vinegar sample?
Last Answer : The volume of NaOH is 99 mL.
Description : Which of the following pairs will have greater conduction and why ? (a) Copper wire at 25 °C and Copper wire at 50 °C. (b) 0.1 M acetic acid solution or 1 M acetic acid solution ?
Last Answer : (a) Copper wire at 25 °C because with increase in temperature metallic conduction decreases due to vibration of kernels. (b) 0.1 M acetic acid solution because with dilution degree of dissosciation increases and hence no. of ions.
Description : The order of reaction is the number of moles whose concentrations determine the rate of a reaction at a given temperature Give the integrated equation for first order reaction. K = (2.303 / t) * log (a ... a' is the initial concentration of reactants x' is the amount reacted in time t seconds
Last Answer : What is Threshold energy ?
Description : 45.4 L of nitrogen reacted with 22.7 L of oxygen and 45.4 L of nitrogen oxide was formed. The reaction is given below: 2N2(g) + O2(g) →2N2O(g) Which law is being obeyed in this experiment? Write the statement of this law.
Last Answer : Ans. Gay lussac’s law of gaseous volume is being obeyed. According to gay lussac’s law of gaseous volumes, gases combine or are produced in a chemical reaction in a simple ration by volume, provided that all gases are the same temperature and pressure.
Description : When antigens are attached to the surface of latex beads and then reacted with an appropriate antibody, a/an reaction occurs. a. Inhibition b. Agglutination c. Neutralization d. Precipitation
Last Answer : b. Agglutination
Description : Semibatch reactor is preferred, when a/an (A) A highly exothermic reaction is to be controlled (B) Undesirable side reaction (at high concentration of one of the reactants) is to be avoided (C) A gas is to be reacted with liquid (e.g. hydrogenation of fat) (D) All (A), (B), and (C
Last Answer : (D) All (A), (B), and (C
Description : Compound (A) when reacted with PCl5 and then with ammonia gave (B). Compound (B) when treated with bromine and NaOH, produced (C). Compound (C) on treatment with NaNO2/HCl at 0°C and then boiling with H2O ... Compound (A) is (a) o-Toluic acid (b) o-Chlorotoluene (c) m-Toluic acid (d) o-Bromotoluene
Last Answer : o-Toluic acid
Description : A 100 mL sample of water was treated to convert any iron present to `Fe^(2+)`. Addition of 25 mL of 0.002 M `K_(2)Cr_(2)O_(7)` resulted in the reactio
Last Answer : A 100 mL sample of water was treated to convert any iron present to `Fe^(2+)`. Addition of 25 ... parts per million (ppm) of iron in the water sample.
Description : How many ml of 50 percent dextrose solution and how many ml of water are needed to prepare 4.5 L of a 1 percent solution?
Last Answer : 90 ml of dextrose and 4.41 litres of water.
Description : What is the concentration in percent (vv) of a solution containing 50 mL of diethyl ether(C4H10O) in 2.5 L of solution?
Last Answer : Need answer
Description : 45. When Cl2 gas reacts with hot and concentrated sodium hydroxide solution, the oxidation number of chlorine changes from (1) Zero to + 1 and zero to –3 (2) Zero to +1 and zero to –5 (3) Zero to –1 and zero to + 5 (4) Zero –1 and zero to + 3
Last Answer : Zero to –1 and zero to + 5
Description : In the redox reaction . `MnO_(4)^(-)+C^(2)O_(4)^(2-)+H^(+) rarr Mn^(2+)+CO_(2)+H_(2)O` (Unbalance equation) 20 mL of 0.1 M `KMnO_(4)` react quantitive
Last Answer : In the redox reaction . `MnO_(4)^(-)+C^(2)O_(4)^(2-)+H^(+) rarr Mn^(2+)+CO_(2)+H_(2)O` ( ... . 40 mL of 0.1 M oxalate D. 50 mL of 0.25 M oxalate
Description : Normal serum insulin level varies between (A) 4–25 µU/ml (B) 25–50 µU/ml (C) 70–90 µU/ml (D) 100–120 µU /ml
Last Answer : Answer : A
Description : The normal serum concentration of ceruloplasmin in mg/100 ml varies between (A) 5–10 (B) 10–20 (C) 25–43 (D) 50–100
Last Answer : Answer : C
Description : The normal serum concentration of 24,25- dihydroxycholecalciferol in ng/ml is (A) 8–20 (B) 25–50 (C) 1–5 (D) 60–100
Description : Liquid "X" is at equilibrium with its vapor in a cylinder and piston apparatus. When the volume of the space above the liquid is 50 ml and the temperature 25!, the vapor pressure of "X" is 120 torr. What will the ... 25!C? Some liquid is always present. w) 30 torr x) 60 torr y) 120 torr z) 240 torr
Last Answer : ANSWER: Y -- 120 TORR
Description : After dissolving 0.25 kg of salt in 1 kg of water, its volume becomes 1200 cc. What is the concentration of solution ?
Last Answer : We know , 1 cc = 1cm ^ 3 = (10 ^ -6) m ^ 3 Density of salt water = (1 + 0.25) / (1200 × 10 ^ - ৬) = 1.04 kg / (m 3)