With 100 % inductive shunt compensation, the voltage profile is flat for?

With 100 % inductive shunt compensation, the voltage profile is flat for?

by

1 Answer

Answer :

With 100 % inductive shunt compensation, the voltage profile is flat for zero loading of line.

by

Related questions

With 100 % series compensation of line.

Description : With 100 % series compensation of line.

Last Answer : the circuit is series resonant at power frequency and high transient current.

Shunt compensation in an EHV line is used to

Description : Shunt compensation in an EHV line is used to (A) Improve stability. (B) Improve the voltage profile. (C) Reduce the fault level. (D) Substitute for synchronous phase modifier.

Last Answer : Shunt compensation in an EHV line is used to Improve the voltage profile.

If a line is 100 % series compensated it may result into series resonance...

Description : If a line is 100 % series compensated it may result into series resonance at power frequency of?

Last Answer : If a line is 100 % series compensated it may result into series resonance at power frequency of 50 Hz.

When a d.c source is switched is purely inductive, the current response is?

Description : When a d.c source is switched is purely inductive, the current response is?

Last Answer : Increase exponentially and reach a constant value

An RLC series. circuit remains predominantly inductive

Description : An RLC series. circuit remains predominantly inductive

Last Answer : Above resonance frequency

Load compensation in power systems is a process to :

Description : Load compensation in power systems is a process to :  (A) Maintain better voltage profile (B) Increase short circuit capacity of the system (C) Generate required harmonics for loads like arc furnaces (D) Compensate for the line reactance

Last Answer : Load compensation in power systems is a process to : Maintain better voltage profile

Series capacitive compensation in EHV transmission line is used to

Description : Series capacitive compensation in EHV transmission line is used to

Last Answer : To maintain voltage stability 

The effect of series capacitance compensation is?

Description : The effect of series capacitance compensation is?

Last Answer : The effect of series capacitance compensation is to decrease the virtual surge impedance, to decrease the effective length of the line, to increase virtual surge impedance loading.

Which of the following statements is incorrect ? (a) Lightning arrestors are used before the switchgear (b) Shunt reactors are used as compensation reactors (c) The peak short current is (1.8 xV2) times the A.C. component (d) The MVA at fault is equal to base MVA divided by per unit equivalent fault reactance

Description : Which of the following statements is incorrect ? (a) Lightning arrestors are used before the switchgear (b) Shunt reactors are used as compensation reactors (c) The peak short current is (1.8 xV2) ... component (d) The MVA at fault is equal to base MVA divided by per unit equivalent fault reactance

Last Answer : (a) Lightning arrestors are used before the switchgear

What for series and shunt compensation provided in EHV transmission lines?

Description : What for series and shunt compensation provided in EHV transmission lines?

Last Answer : Answer: Series capacitance is provided in EHV lines to artificially reduce the series reactance of the line so as to improve stability, voltage regulation and transmission efficiency Shunt compensation ... reduce the line susceptance so as to improve the voltage regulation under light load condition

Objectives of shunt compensation

Description : Objectives of shunt compensation

Last Answer : Objectives of shunt compensation Shunt compensation is use to improve power factor. In Shunt compensation FACTS are connected in parallel with power system and works like a controllable current ... voltage control and damp power oscillation. Examples of shunt compensation is STATCOM and SVC.

A shunt fault is characterized by

Description : A shunt fault is characterized by (A) Increase in current, frequency and pf (B) Increase in current, reduction in frequency and pf (C) Increase in current and frequency, reduction in pf (D) Decrease in current and frequency

Last Answer : B

A 100 km transmission line is designed for a nominal voltage of 132 kV and consists of one

Description : A 100 km transmission line is designed for a nominal voltage of 132 kV and consists of one conductor per phase. The line reactance is 0.726 ohm/km. The static transmission capacity of the line, in MW, would be   (a) 240 (b) 132 (c) 416 (d) 720

Last Answer : A 100 km transmission line is designed for a nominal voltage of 132 kV and consists of one conductor per phase. The line reactance is 0.726 ohm/km. The static transmission capacity of the line, in MW, would be 240 

If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value by which the power would decrease is

Description : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value by which the power would decrease is

Last Answer : If voltage across a bulb rated 220 volt-100 watt drops by `2.5 %` of its value, the percentage of the rated value ... 20%` B. `2.5%` C. `5%` D. `10%`

The electrical diagram shown in the illustration represents a ___________. EL-0054 A. series-wound motor B. shunt-wound motor C. compound-wound motor D. flat-compounded motor

Description : The electrical diagram shown in the illustration represents a ___________. EL-0054 A. series-wound motor B. shunt-wound motor C. compound-wound motor D. flat-compounded motor

Last Answer : Answer: C

The velocity profile for a Bingham plastic fluid flowing (under laminar conditions) in a pipe is (A) Parabolic (B) Flat (C) Flat near the wall and parabolic in the middle (D) Parabolic near the wall and flat in the middle

Description : The velocity profile for a Bingham plastic fluid flowing (under laminar conditions) in a pipe is (A) Parabolic (B) Flat (C) Flat near the wall and parabolic in the middle (D) Parabolic near the wall and flat in the middle

Last Answer : (D) Parabolic near the wall and flat in the middle

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Description : When light strikes a flat polished end of a fiber, it produces a loss of ∙ a. 14 % ∙ b. 4 % ∙ c. 10 % ∙ d. 1 %

Last Answer : ∙ b. 4 %

Voltage will always lead current in a/an ______________. A. capacitive circuit B. inductive circuit C. magnetic circuit D. resistive circuit

Description : Voltage will always lead current in a/an ______________. A. capacitive circuit B. inductive circuit C. magnetic circuit D. resistive circuit

Last Answer : Answer: B

In an AC circuit, the inductive reactance of a coil varies with the _______________. A. resistance of the circuit B. frequency of the circuit C. voltage of the circuit D. current of the circuit

Description : In an AC circuit, the inductive reactance of a coil varies with the _______________. A. resistance of the circuit B. frequency of the circuit C. voltage of the circuit D. current of the circuit

Last Answer : Answer: B

In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Description : In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Last Answer : Ans: All of the above

Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Description : Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Last Answer : (a) compensate for line inductive reactance

Arc in a circuit behaves as (a) a capackive reactance (b) an inductive reactance (c) a resistance increasing with voltage rise across the arc (d) a resistance decreasing with voltage rise across the arc

Description : Arc in a circuit behaves as (a) a capackive reactance (b) an inductive reactance (c) a resistance increasing with voltage rise across the arc (d) a resistance decreasing with voltage rise across the arc

Last Answer : (d) a resistance decreasing with voltage rise across the arc

With the help of waveforms and phasor diagrams, show the phase relationship between voltage and current in pure inductive circuit.

Description : With the help of waveforms and phasor diagrams, show the phase relationship between voltage and current in pure inductive circuit.

Last Answer : Phasor Diagram:  

To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current

Description :  To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current will _____.

Last Answer :  To a highly inductive circuit, a small capacitance is added in series. The angle between voltage and current will decrease.

A single-phase voltage source square -wave inverter feeds pure inductive load. The waveform of the load current will be

Description : A single-phase voltage source square -wave inverter feeds pure inductive load. The waveform of the load current will be

Last Answer : A single-phase voltage source square -wave inverter feeds pure inductive load. The waveform of the load current will be triangular

An AC generator operating in parallel loses its excitation without tripping the circuit breaker. This will __________. A. not affect the faulty generator due to the compensation of the other generators B. cause the slip rings to melt C. cause a low voltage differential to develop between the armature and the bus D. cause high currents to be induced in the field windings

Description : An AC generator operating in parallel loses its excitation without tripping the circuit breaker. This will __________. A. not affect the faulty generator due to the compensation of the other generators B. ... between the armature and the bus D. cause high currents to be induced in the field windings

Last Answer : Answer: D

In case of failed ATM transactions, if the amount is not credited to customer‟s account within 7 working days from the date of receipt of the complaint. Banks have to pay compensation at the rate of Rs.________ per day. A. 150 B. 200 C. 100 D. 10 E. 50

Description : In case of failed ATM transactions, if the amount is not credited to customer‟s account within 7 working days from the date of receipt of the complaint. Banks have to pay compensation at the rate of Rs.________ per day. A. 150 B. 200 C. 100 D. 10 E. 50

Last Answer : C. 100 Explanation: Reconciliation of failed transactions at ATMs – For any failure to re-credit the customer‘s account within 7 working days from the date of receipt of the complaint, the bank will pay compensation of Rs.100/-, per day, to the aggrieved customer.

In case of loss or damage of the parcel, compensation is paid upto a maximum in EPP is a) 100/- b) 500/- c) 200/- d) 1000/

Description : In case of loss or damage of the parcel, compensation is paid upto a maximum in EPP is a) 100/- b) 500/- c) 200/- d) 1000/

Last Answer : b) 500/

The SP/First class PM may grant compensation to the sender a) 500 b) 200c) 1000 d) 100 of a regd article up to

Description : The SP/First class PM may grant compensation to the sender of a regd article up to a) 500 b) 200 c) 1000 d) 100

Last Answer : d) 100

High Voltage DC (HVDC) transmission is mainly used for

Description : High Voltage DC (HVDC) transmission is mainly used for  (A) bulk power transmission over very long distances (C) inter-connecting two systems with same nominal frequency (C) eliminating reactive power requirement in the operation (D) minimizing harmonics at the converter stations

Last Answer : High Voltage DC (HVDC) transmission is mainly used for bulk power transmission over very long distances 

For a fixed value of complex power flow in a transmission line having a sending and voltage V, the real

Description : For a fixed value of complex power flow in a transmission line having a sending and voltage V, the real power loss will be proportional to  A) V B) v2 C) 1/V2 D)1/V

Last Answer : For a fixed value of complex power flow in a transmission line having a sending and voltage V, the real power loss will be proportional to 1/V2

The rated voltage of a 3-phase power system is given as

Description : The rated voltage of a 3-phase power system is given as  A) rms phase voltage B) Peak phase voltage C) rms line to line voltage D) Peak line to line voltage

Last Answer : The rated voltage of a 3-phase power system is given as rms line to line voltage

If a voltage-controlled bus is treated as load bus, then which one of the following limits would be

Description : If a voltage-controlled bus is treated as load bus, then which one of the following limits would be violated?   (a) Active power (b) Reactive power (c) Voltage (d) Phase angle 

Last Answer : If a voltage-controlled bus is treated as load bus, then which one of the following limits would be violated?   (a) Active power (b) Reactive power (c) Voltage (d) Phase angle 

A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage

Description : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he

Last Answer : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he 0.52

A transformer has negative voltage regulation when its load power factor is

Description : A transformer has negative voltage regulation when its load power factor is   (1) Zero (2) Unity (3) Leading (4) Lagging

Last Answer : 0

An alternator has a phase sequence of RYB for its phase voltage. In case...

Description : An alternator has a phase sequence of RYB for its phase voltage. In case the direction of rotation of alternator is reversed, the phase sequence will become?

Last Answer : An alternator has a phase sequence of RYB for its phase voltage. In case the direction of rotation of alternator is reversed, the phase sequence will become RBY.

The function of the earth wire in an extra high voltage line is to?

Description : The function of the earth wire in an extra high voltage line is to?

Last Answer : The function of the earth wire in an extra high voltage line is to provide a shield to the phase conductors from direct lightning stroke.

The non-uniform distribution of voltage across the units in a string of ...

Description : The non-uniform distribution of voltage across the units in a string of suspension type insulators is due to?

Last Answer : The non-uniform distribution of voltage across the units in a string of type insulators is due to the existence of stray capacitance between the metallic junctions of the units and the tower body.

The low voltage winding of a 400/230 V, 1-phase, 50 Hz transformer is to...

Description : The low voltage winding of a 400/230 V, 1-phase, 50 Hz transformer is to be connected to a 25 Hz, the supply voltage should be

Last Answer : The low voltage winding of a 400/230 V, 1-phase, 50 Hz transformer is to be connected to a 25 Hz, the supply voltage should be 115 V.

A voltage of 1000 kV is applied to an overhead line with its receiving end...

Description : A voltage of 1000 kV is applied to an overhead line with its receiving end open. If the surge impedance of the line is 500 ohm, then the total surge power in the line ill

Last Answer : A voltage of 1000 kV is applied to an overhead line with its receiving end open. If the surge impedance of the line is 500 ohm, then the total surge power in the line ill 2000 MW .

For certain geometry and operating voltage of the uncompensated...

Description : For certain geometry and operating voltage of the uncompensated transmission line, the ratio of power transfer capability to the surge impedance loading with an increase in length

Last Answer : For certain geometry and operating voltage of the uncompensated transmission line, the ratio of power transfer capability to the surge impedance loading with an increase in length decreases.

A 60 Hz, 320 km lossless line has Bending end voltage 1.0 p.u, The receiving end voltage on no load is

Description : A 60 Hz, 320 km lossless line has Bending end voltage 1.0 p.u, The receiving end voltage on no load is?

Last Answer : A 60 Hz, 320 km lossless line has Bending end voltage 1.0 p.u, The receiving end voltage on no load is 1.088 p.u.

In a string of suspension insulators, the voltage distribution across...

Description : In a string of suspension insulators, the voltage distribution across the different units of a string could be made uniform by the use of a grading ring, because it?

Last Answer : In a string of suspension insulators, the voltage distribution across the different units of a string could be made uniform by the use of a grading ring, because it forms capacitances which help to cancel the charging current from link pins.

To increase the visual critical voltage of cporona for an overhead line, ...

Description : To increase the visual critical voltage of cporona for an overhead line, one solid phase-conductor is replaced by a "bundle" of four smaller conductors per phase, having an aggregate cross- ... solid conductor is 40 mm, then the radius of each of the bundle conductors would be?

Last Answer : To increase the visual critical voltage of cporona for an overhead line, one solid phase-conductor is replaced by a "bundle" of four smaller conductors per phase, having an aggregate cross- ... conductor is 40 mm, then the radius of each of the bundle conductors would be 30 mm.

The inertia constant of a 100 MVA, 11 kV water wheel generator is 4. The energy stored in the rotor at the

Description : The inertia constant of a 100 MVA, 11 kV water wheel generator is 4. The energy stored in the rotor at the synchronous speed is: A) 400 Mega Joule B) 400 Kilo Joule C) 25 Mega Joule D) 25 Kilo Joule

Last Answer : The inertia constant of a 100 MVA, 11 kV water wheel generator is 4. The energy stored in the rotor at the synchronous speed is: 400 Mega Joule

A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a

Description : A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a 3-phase transmission line. The line-to line voltage at the terminals of the machine is maintained constant at 11 kV. The per ... 11 kV is  (A) 100 MVAR (B) 10.1 MVAR (C) -100 MVAR (D) -10.1 MVAR

Last Answer : A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a 3-phase transmission line. The line-to line voltage at the terminals of the machine is maintained ... load to increase the line-to-line voltage at the load terminals to 11 kV is -10.1 MVAR

A 100 km long transmission line is loaded at 110 kV.if the loss of line is ...

Description : A 100 km long transmission line is loaded at 110 kV.if the loss of line is 5 MW and the load is 150 MVA, the resistance of the line is?

Last Answer : P = I^2  *  R 5*10^6  = [(150*10^6) / (110*10^3)  *  R R = 2.7 ohm/phase

What are the reason of fall of terminal voltage of a D.C.Shunt generator?

Description : What are the reason of fall of terminal voltage of a D.C.Shunt generator?

Last Answer : As the load current increases, the terminal voltage tends todrop due to increased current and drop in voltage due to internalwinding resistance.

An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from _____________. A. one line terminal to each coil lead in succession B. one field coil to each adjacent field coil in turn C. any suitable ground to any available line lead D. any field pole to each field coil lead

Description : An open shunt field in a direct current machine may be located by connecting the field circuit to an external power source, equal to the rated field voltage or less, and tested with a voltmeter from ... C. any suitable ground to any available line lead D. any field pole to each field coil lead

Last Answer : Answer: A