Write different causes of accidents in laboratories.

1 Answer

Answer :

Causes of accident in a laboratory:

1. Wet and slippery floor

2. Improper ventilation

3. Unavailability of personal protective equipment

4. Insufficient information about chemical hazard

5. Unsafe acts

6. Lack of written procedures regarding safety and emergency Improper material handling

Related questions

Description : Enlist the different types of Accidents.

Last Answer : Different types of accidents: 1. Near accident 2. Trivial accident 3. Minor accident 4. Serious accident 5. Fatal accident

Description : Write down names of different unit operations

Last Answer : Different unit operations  1. Size reduction 2. Size separation or screening 3. Mixing 4. Filtration 5. Sedimentation 6. Extraction 7. Distillation 8. Drying 9. Crystallization 10. Gas absorption

Description : Describe the major causes of accident in chemical industries.

Last Answer : Causes of accident in Chemical industries: 1. Unsafe physical conditions: It includes improper machine guards, improper ventilation, inadequate ventilation, unsafe clothing etc. 2. Personal factors: ... and emergency equipment 10. Lack of written procedures regarding safety and emergency.

Description : Write the safety measure in the following accidental cases: (i) Eye injury (chemical) (ii) Burn (iii) Skin contact (iv) Inhalation of toxic fumes.

Last Answer : Safety measures for: i)Eye injury : a) Have the person immediately rinse the eye with clean water. b) Flush with lukewarm water for 15-30 minutes c) Flush the eye to ... symptoms such as head ache, nose or throat irritation, dizziness or drowsiness persists, seek immediate medical attention.

Description : Write the classification of unit operations and unit processes.

Last Answer : Unit Operation: It is the operation in which only physical changes occur, but no chemical changes Classification of Unit operation: 1. Mechanical Operations: Transportation of materials, size ... Hydrogenation 7. Dehydrogenation 8. Esterification 9. Calcination 10. Pyrolysis 11. Halogenation

Description : Write about emergency exit route and assembly point.

Last Answer : Emergency exit: An emergency exit is an exit other than regular exit in a workplace which is used for prompt evacuation of employees from the workplace during emergencies such as fire, explosion etc ... . It should have unobstructed pathway to them and should be located away from power lines. 

Description : Describe solubility saturation solubility. Write the effect of temperature on solubility.

Last Answer : Solubility: Solubility of a solute is the maximum amount of solute that can be dissolved in a given amount of solvent at a specific temperature and pressure. OR It is the amount ... litre of solution. Effect of temperature on solubility: Solubility increases as temperature increases.

Description : Write the formula for weight % and mole %.

Last Answer : Formulas for: 1. weight %  Let a mixture contains components A,B & C of weights WA, WB & WC Weight % of A =( Weight of A/ Total weight of mixture) * 100  = WA/(WA+WB+WC)*100 2. mole % Let the moles of the components be nA,nB & nC Mol% of A = (moles of A/total moles)*100  = (nA/nA+nB+nC) *100

Description : Define electrical conductivity and write its unit.

Last Answer : Electrical conductivity: Electrical conductivity of an electrolyte solution is a measure of the ability of the solution to conduct electricity(electric current) Unit: ohm-1

Description : Write the names of any 4 personal protective equipments.

Last Answer : Names of personal protective equipment: 1. Helmet 2. Hard hat 3. Goggles 4. Ear plug 5. Ear muff 6. Apron 7. Hand gloves 8. Boots 9. Safety shoes

Description : Write working principal of conductivity motor

Last Answer : Working Principle of conductivity meter: Two electrodes (platinum plates) are placed in a sample, a potential is applied across the electrodes, and the current is measured. The probe(two electrodes ... of the solution and then the conductivity of the solution using the conductance and cell constant.

Description : Write principle of conductivity meter and Abbes refractometer.

Last Answer : Principle of conductivity meter: Two electrodes (platinum plates) are placed in a sample , a potential is applied across the electrodes, and the current is measured. Principle of Abbe's ... the sample is brought into contact with the medium of a known refractive index (measuring prism).

Description : Enlist different unit operation

Last Answer : Different unit operations 1. Size reduction 2. Size separation or screening 3. Mixing 4. Filtration 5. Sedimentation 6. Extraction 7. Distillation 8. Drying 9. Crystallization 10. Gas absorption

Description : Enlist different unit operations. Explain any one in details

Last Answer : Different unit operations: 1. Size reduction 2. Size separation or screening 3. Mixing 4. Filtration 5. Sedimentation 6. Extraction 7. Distillation 8. Drying 9. Crystallization 10 ... the solid phase to the gas phase. Usually a solid or nearly solid materials are processed in dryer.

Description : Describe the following unit processes: (i) Pyrolysis (ii) Hydration (iii) Hydrogenation.

Last Answer : i)Pyrolysis: The decomposition of a compound by heat is called pyrolysis. Large alkane molecules are broken down to give lower molecular weight alkanes, alkenes and hydrogen. Eg: When ethane is heated to 500 ... Chemical Reaction for hydrogenation: CH2= CH2 + H2 → CH3-CH3 C6H6 + 3H2→C6H12

Description : Explain electrostatic separation with a neat sketch. 

Last Answer : Electrostatic Separator Principle: If one or more of the materials of a granular mixture can acquire a  surface charge on or just before entering an electrostatic field, the particles of that ... repelled by electrode ,attracted by drum, falls straight in collecting bin due to gravity. 

Description : Explain the following unit operations: (i) Mixing (ii) Drying (iii) Evaporation (iv) Absorption.

Last Answer : i)Mixing: Mixing is carried out for producing simple mixtures, accomplishing dispersions and promoting chemical reactions. It is a process in which two separate materials such as two different ... ammonia mixture by water 2) Removal of hydrogen sulfide from naturally occurring hydrocarbon gases.

Description : Explain following unit processes: (i) Oxidation (ii) Nitration. 

Last Answer : Oxidation: It is defined as the addition of oxygen or removal of hydrogenation from organic compounds. - Oxidation reaction may involve the introduction of oxygen in the molecule of a compound. Oxidation ... acid and con. Nitric acid. Nitrating mixture is used in nitration reaction.   

Description : Explain the following terms: (i) Dry Bulb Temperature (ii) Wet Bulb Temperature.

Last Answer : Dry bulb temperature: Temperature recorded by ordinary thermometer is called dry bulb temperature. Measurement of DBT: The temperature of air measured by an ordinary thermometer without cover of bulb by ... or possible rain. One condition for rain is abundance of water vapour in the atmosphere.

Description : Describe Refractive Index property of solution. Explain its dependence on composition and temperature.

Last Answer : Refractive index: Refractive index of a medium is defines as the ratio of speed of light in vacuum to the speed of light in the medium. Refractive index = (speed of light in vacuum/ speed of ... decreases as the solution is denser and as a result of this refractive index of the solution decreases. 

Description : Explain the following terms: (i) Scale Up (ii) Design

Last Answer : Scale up: It is the migration of a process from laboratory scale to the bench scale, then to the pilot plant scale and finally to the commercial scale / industrial scale. In scale up, ... Design information, both chemical and mechanical is used for the fabrication / construction of the reactor. 

Description : Describe conductivity meter.

Last Answer : Conductivity meter: It is used to measure conductivity of a solution. Two electrodes (platinum plates) are placed in a sample, a potential is applied across the electrodes, and the current is ... the solution and then the conductivity of the solution using the conductance and cell constant.

Description : Define pH of solution

Last Answer : pH of solution: It is defined as the negative logarithm of hydrogen ion concentration. pH= - log[H+ ]

Description : Define normality of solution.

Last Answer : Normality of solution: It is defines as the number of gram equivalent of solute per liter of solution  Normality = Gram equivant of solute/ volume of solution in liter

Description : Define Reactor.

Last Answer : Definition of reactor: It is a vessel or an equipment in which a chemical reaction takes place.

Description : Explain the principle of the following – (i) Distillation (ii) Drying (iii) Crystallization

Last Answer : Distillation:-Distillation is an operation in which the components of a liquid mixture are separated using thermal energy. It depends upon the difference in boiling points of the individual components. The ... temperature. The solute then comes out of the solution in the form of pure crystals.  

Description : Explain the concept of dry bulb, wet bulb temperature. How they are measured?

Last Answer : Dry Bulb Temperature of Air (DBT) The temperature of the air measured by the ordinary thermometer is called as the dry bulb temperature of air, commonly referred as DBT. When ordinary thermometer is ... bulb temperature of air. The difference between the DBT and WBT is called as wet bulb depression.

Description : Explain following unit process with example. (i) Reduction (ii) Calcination (iii) Nitration

Last Answer : Reduction: Reduction is defined as the addition of hydrogen, removal of oxygen, addition of metallic element or addition of electrons. Eg. Reduction of ethyl bromide Nitrobenzene can be reduced ... Sulfuric acid and con. Nitric acid.  Nitrating mixture is used in nitration reaction.

Description : Explain the measurement of Retractive index and it’s dependence on composition and temperature.

Last Answer : Measurement of Refractive Index: The Refractive index of a medium is defined as the ratio of speed of lignt in vacuum to the speed of light in the medium  The refractive ... light through the liquid. Thus the refractive index of liquid or solution increases with increasing concentration. 

Description : Define solubility and give the effect of temperature on a solubility of solute.

Last Answer : Solubility: Solubility of a solute is the maximum amount of solute that can be dissolved in a given amount of solvent at a specific temperature and pressure. OR It is the amount of ... in gm/ litre of solution. Effect of temperature on solubility: Solubility increases as temperature increases.

Description : Differentiate between filteration and sedimentation.

Last Answer : Differentiate between filtration and sedimentation Sedimentation Filtration Gravitational force is acting Pressure force is acting Sedimentation tanks or settling tanks are used. Filters are used  No filter medium is used Filter medium is used

Description : Explain the laws of Thermodynamics. 

Last Answer : Laws of thermodynamics:  1. First law: Energy can neither be created nor destroyed, but it can be converted from one form to another.  2. Second law: Entropy of an isolated system tends to ... 3. Third law: Entropies of all pure crystalline solids may be taken as zero at absolute zero temperature.

Description : Define unit operation and give its classification.

Last Answer : Unit Operation: It is the operation in which only physical changes occur, but no chemical changes Classification of Unit operation: 1. Mechanical Operations: Transportation of materials ... 3. Thermal operations: Evaporation, condensation, drying, distillation, crystallization, gas absorption etc.

Description : Describe application of pH measurement inindustry. How pH affect the electrical conductivity.

Last Answer : Application of pH measurement in Industry:  pH measurement is essential in : 1) Waste water treatment, municipal sewage treatments. 2) Boiler feed water treatment. 3) Drinking ... ions for an acidic solution, Thus solutions having lower pH values are having higher conductivity values.

Description : Air contain 21% O2 and 79% N2 by volume. Calculate the composition in terms percentage by weight.

Last Answer : Basis: 100 kmole air Kmoles of O2 =21 Kmoles of N2 =79 Weight of O2 =21x32=672 kg Weight of N2 =79x28=2212 kg Total weight =2884 kg Weight% of O2 = (weight of O2/ total weight)x100  = (672/2884)x100  = 23.3% Weight% of N2 =(weight of N2/ total weight)x100  = (2212/2884)x100  = 76.7%

Description : Describe Dalton’s law and Amagat’s law with example.

Last Answer : Dalton's law: It states that the total pressure exerted by a gas mixture is equal to the sum of partial pressures of its component gases. P = P1 + P2 + P3 Where P is total pressure of gas mixture ... VA+VB+VC+-----  Where V is Total Volume, VA,VB,VC = Pure components volumes of component gases

Description : Define the term chemical Kinetics. Explain importance of Kinetics of chemical engineering.

Last Answer : Chemical Kinetics: It is a study of the rates at which chemical reactions occur and the effect of parameters such as temperature, pressure and reactant concentration/ composition on the reaction rate.  ... reaction and type of rate equation which is to be used in the design of reactors. 

Description : Define Evaporation and Leaching.

Last Answer : Evaporation: It is a unit operation in which a weak solution is concentrated by boiling off the solvent. The product is concentrated solution. Leaching: Leaching is an operation in which a solid ... of removing a solute from the solid by treating it with a liquid solvent is called leaching.

Description : Define Molarity of solution and how it is calculated?

Last Answer : Molarity of solution= It is the number of gram moles of solute present in one litre of solution. M= gram moles of solute/ volume of solution in litres

Description : Define unsafe act.

Last Answer : Unsafe act: It is the violence of commonly accepted safe procedure. These include 1. Working at unsafe speed 2. Loading machines beyond capacity 3. Not using safety devices 4. Making use of improper tools 5. Adopting unsafe procedures

Description : How chemical industry classified based on application. 

Last Answer : Types of chemical industries on the basis of application: On the basis of application, Chemical industries are classified as 1. Industries manufacturing Basic chemicals 2. Industries manufacturing Fine chemicals 3. Industries manufacturing Specialty chemicals

Description : Draw a neat sketch of Electro-dialysis.

Last Answer : Electro- dialysis:

Description : Explain Distillation and Leaching unit operation.

Last Answer : Distillation:-Distillation is an operation in which the components of a liquid mixture are separated using thermal energy. It depends upon the difference in boiling points of the individual components. The ... by using hexane as solvent. 3)Extraction of sugar from sugar beats using hot water. 

Description : Explain Abbes Refractometer.

Last Answer : Abbes Refractometer: Principles: The refractive index of a sample is determined by measuring the critical angle made when the sample is brought into contact with the medium (measuring prism) of a known ... read from the scale provided. The accuracy of this instrument is about 0.0002 .

Description : Explain following unit processes with suitable example. (i) Sulphonation (ii) Hydrogenation (iii) Esterification

Last Answer : (i) Sulfonation reactions : It is the reaction with sulfuric acid to introduce sulfonic (SO3H) group into a compound.   (ii) Hydrogenation: Hydrogenation may be defined as the chemical ... of ethyl acetate. Sulphuric acid and hydrochloric acids are the catalysts used for esterification.  

Description : Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Last Answer : i)Tray dryer:   ii)Plate column:    iii)Packed column:   iv) Jaw crusher:   v) Stirrer:   vi) Ball mill  

Description : Describe application of pH measurement in industry. How pH affect the electrical conductivity

Last Answer : Application of pH measurement in Industry: pH measurement is essential in : 1) Waste water treatment, municipal sewage treatments. 2) Boiler feed water treatment. 3) Drinking water ... ions for an acidic solution, Thus solutions having lower pH values are having higher conductivity values.

Description : 20 gram of caustic soda are dissolved in water to prepare 500 ml of solution. Find the normality and molarity of solution.

Last Answer : Basis: 500 ml solution. Weight of solute = 20 gm Molecular weight of NaOH = 40 Gram moles of solute = 20/40 = 0.5 Molarity = Gram moles/ Volume of solution in lit  0.5/0.5 = 1 M Normality = gram equivalent of solute/ volume of solution in lit  = 0.5/0.5 = 1N 

Description : State the importance of emergency exist route and assembly point.

Last Answer : Importance of Emergency exit: An emergency exit is an exit other than regular exit in a workplace which is used for prompt evacuation of employees from the workplace during emergencies such as fire, ... . It should have unobstructed pathway to them and should be located away from power lines. 

Description : Explain the importance of safety in chemical industry

Last Answer : Importance of safety in chemical industries: 1. To increase the rate of production 2. To reduce the cost of production 3. To reduce the damage to equipment and machinery 4. To protect the life and limbs of the workers