Define: (i) Electromagnetism (ii) Magnetic flux.

Define: (i) Electromagnetism (ii) Magnetic flux.
by

1 Answer

Answer :

i)Electromagnetism : It is the magnetism generated by electricity.

OR

 It is defined as the phenomenon associated with electric and magnetic fields and their interactions with each other.

ii) Magnetic flux : The total number of magnetic lines of force in a magnetic field is called magnetic flux.
by

Related questions

Define (i) Permeability (ii) Reluctance.

Description : Define (i) Permeability (ii) Reluctance.

Last Answer : Permeability: The capability of the magnetic material to conduct the magnetic flux is known as permeability (OR) It is defined as ratio of magnetic flux density B in a medium to the magnetic flux intensity ... as the property of a material due to which it opposes the creation of magnetic flux in it.

Define: (i) Efficiency (ii) Voltage regulation of transformer.

Description : Define: (i) Efficiency (ii) Voltage regulation of transformer.

Last Answer : i) Efficiency : It is the ratio of output power to the input power of the transformer.It is denoted by η. ii) Voltage Regulation of transformer: The ratio of the change in Secondary Terminal ... So where, VNL = No Load Secondary voltage VFL = Full load secondary voltage

Define: (i) Inductive reactance (ii) Impedance.

Description : Define: (i) Inductive reactance (ii) Impedance.

Last Answer : i) Inductive reactance: Inductive reactance is the opposition offered by an inductor to alternating current . It is denoted by XL and given by XL = 2πf LΩ = ωL Ω ii)Impedance: It is the total opposition offered to flow of AC current in an AC circuit. It is denoted by Z and the unit is ohm. 

Define filter and state it’s types.

Description : Define filter and state it’s types.

Last Answer : A filter circuit may be defined as a circuit, which removes (or minimizes)the unwanted a.c. component of the rectifier output and allows only the d.c. component to reach the load. Types of filters 1) ... 2) Choke input filter(series inductor filter) 3) LC filter 4) π Filter 5) RC filter

Define transformation ratio of a transformer.

Description : Define transformation ratio of a transformer.

Last Answer : Transformation Ratio (K) of a transformer: It is the ratio of secondary number of turns to primary number of turns. (OR) It is the ratio of secondary voltage to primary voltage. (OR ) It is the ratio of primary current to secondary current. OR

Define FHP motor and list various types.

Description : Define FHP motor and list various types.

Last Answer : Any motor rated less than one horse power may be called as fractional horse power motors(FHP) various types of FHP motors are: 1.Split phase induction motor 2. Capacitor start induction motor 3. Capacitor start capacitor run induction motor 4. Shaded pole induction motor. 

Define EMF and state its unit.

Description : Define EMF and state its unit.

Last Answer : Electromotive force(EMF): A potential difference generated by a source of electrical energy across its terminals which tends to produce an electric current in a circuit is called electromotive force. Unit of EMF is Volt

Define passive components and classify them.

Description : Define passive components and classify them.

Last Answer : Passive components: The components which by themselves are not capable of amplifying (or processing) electrical signals are known as passive components. They require external energy source for their functioning. These are bidirectional devices.  Classification: Resistors, Capacitors, Inductors etc.

Draw: (i) Input characteristics of transistor in CE mode. (ii) Output characteristics of transistor in CE mode and show different regions on it.

Description : Draw: (i) Input characteristics of transistor in CE mode. (ii) Output characteristics of transistor in CE mode and show different regions on it.

Last Answer : (i) Input characteristics of transistor in CE mode.   (ii) Output characteristics of transistor in CE mode and show different regions on it.  

Explain the operation of transistor as a switch and as an amplifier, with neat circuit diagrams.

Description : Explain the operation of transistor as a switch and as an amplifier, with neat circuit diagrams. 

Last Answer : Explanation of transistor as a switch: The transistor can be used for two types of application viz. amplification and switching. For the amplification, transistor is biased in its active region. ... results in a large output voltage, which shows that the transistor works as an amplifier.

Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Description : Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Last Answer : During positive half-cycle of input, the secondary voltage VAB is positive, so diodes D1 and D2 forward biased and D3 and D4 reverse biased. The load current flows from terminal A ... smooth DC voltage appears across the load. The input and output waveforms are shown in the figure.

List any 4 advantages and any 4 disadvantages of Integrated circuits.

Description : List any 4 advantages and any 4 disadvantages of Integrated circuits.

Last Answer : Advantages of Integrated circuits:- 1. Extremely small size. 2. Very small weight . 3. Very low cost . 4. More reliable . 5. Lower power consumption . 6. Easy replacement ... achieved.  9.Large value of saturation resistance of transistors. 10.Voltage dependence of resistor and capacitors.

Draw the output characteristics of BJT in CE configuration and label various regions on it.

Description : Draw the output characteristics of BJT in CE configuration and label various regions on it.

Last Answer :  output characteristics of BJT in CE configuration 

State the applications of BJT.

Description : State the applications of BJT.

Last Answer : Applications of BJT: 1. As a switch 2. As an amplifier 3. As a multivibrator 4. As a oscillator 5. As a timer circuit 6. As a Logic circuits 7. Delay circuits

Draw the block diagram of regulated power supply.

Description : Draw the block diagram of regulated power supply.

Last Answer : Block diagram of regulated power supply:

List different types of resistors and capacitors.

Description : List different types of resistors and capacitors.

Last Answer : Types of Resistors: 1. Carbon Composition resistor 2. Thin film resistor 3. Thick film resistor 4. Wire wound resistor 5. Thermistor 6. LDR 7. Photo resistor Types of capacitors: 1 ... capacitor 2. Variable capacitor 3. Air ganged capacitor 4. PVC ganged capacitor 5. Trimmer capacitor

Explain statically induced EMF and Dynamically induced EMF with neat diagrams.

Description : Explain statically induced EMF and Dynamically induced EMF with neat diagrams.

Last Answer : Statically Induced EMF:- When changing magnetic field links with a stationary coil an emf is induced. This emf is called statically induced emf. Statically induced EMF is of two types: Self-induced ... cuts the field and an emf is induced. This emf is called dynamically induced emf.    

Explain the working of auto-transformer and state any two advantages of it.

Description : Explain the working of auto-transformer and state any two advantages of it. 

Last Answer : Working of auto transformer :-It is a transformer with one winding only, part of this being common to both primary and secondary. In this transformer the primary and secondary are not electrically ... are less, so the efficiency of auto transformer is higher than that of two winding transformer.

Write the relation between RMS value and Average value.

Description : Write the relation between RMS value and Average value.

Last Answer : The ratio of RMS value to average value is called the form factor of an alternating quantity.

Draw and explain: bridge rectifier with shunt capacitor filter.

Description : Draw and explain: bridge rectifier with shunt capacitor filter.

Last Answer : Operation of bridge rectifier with capacitor filter is explained in different intervals with the help of the following wave form. Operation in interval at 0 to A: ... filter is very close to theideal dc voltage waveform as most of the ripple is removed from rectified output.

Explain ideal voltage source with suitable diagram.

Description : Explain ideal voltage source with suitable diagram.

Last Answer : A voltage source is a two terminal device which can maintain a fixed voltage. An ideal voltage source can maintain the fixed voltage independent of the load resistance or the output current. ... the terminal voltage remains constant equal to V volts without load (RL = ∞) or with load

State the need for filters and list the different types of filters.

Description : State the need for filters and list the different types of filters.

Last Answer : Need for filters 1) Output of all rectifiers is pulsating dc voltage and most of citcuits which work on dc requires pure dc voltage. 2) So in order to get pure dc waveform, filters are connected at the ... 2) Choke input filter(series inductor filter) 3) LC filter 4) π Filter 5) RC filter

List the different transistor configurations.

Description : List the different transistor configurations.

Last Answer : The three different transistor configurations are, 1. Common emitter configuration(CE) 2. Common base configuration(CB) 3. Common collector configuration(CC)

State why transistor is called as a bipolar device.

Description : State why transistor is called as a bipolar device.

Last Answer : In case of transistor (BJT), the current conduction takes place due to both electrons and holes, ie, due to both positive as well as negative polarity charge carriers. Therefore transistor is called a bipolar device. 

List any two applications of LED.

Description : List any two applications of LED.

Last Answer : 1) LEDs are used in 7 segment display and dot matrix display. 2) They are used in opto couplers. 3) They are used for indicating power ON/OFF conditions. 4) They are used in infrared remote controls. 5) They are used as indicators in various electronic circuits.

Compare analog and digital ICs.

Description : Compare analog and digital ICs.

Last Answer : Sr. No. Analog ICs Digital ICs  1 Analog ICs accept and output analog data through its pins. Digital ICs deal with only logic data inputs and outputs.  2 Almost every ... IC for dedicated application. Works with TTL logic level and works in voltage range of 0-5V only.

Compare autotransformer with two winding transformer.

Description : Compare autotransformer with two winding transformer.

Last Answer : Two winding transformer Auto transformer 1.It has two separate windings : a) primary, b)secondary.  1. An auto transformer has single winding which acts both as primary and secondary ... varied. 3. They find application as boosters in AC feeders to increase the voltage levels.

State Faraday's first and second law of electromagnetic induction.

Description : State Faraday's first and second law of electromagnetic induction.

Last Answer : i)Faraday's First Law: Whenever a conductor cuts the magnetic lines of force or is cut by the magnetic lines of force or flux linking with conductor changes, an emf is induced in the conductor.  ... Law: The magnitude of induced emf is directly proportional to the rate of change of flux.

Write emf equation of a transformer.

Description : Write emf equation of a transformer.

Last Answer : E.M.F equation of transformer is given by where Фm= Maximum value of ac flux linking with primary and secondary winding. f = frequency of applied ac signal N= number of turns on primary or ... in primary = E1=4.44 Фm f N1volts  Voltage induced in primary = E2=4.44 Фm f N2volts

State the types of single phase induction motors.

Description : State the types of single phase induction motors.

Last Answer : The types of single phase induction motors are: i) Resistance split phase induction motor. ii) Capacitor split phase inductor motor. a. Capacitor start induction run motor b. permanent capacitor motor c. capacitor start capacitor run induction motor iii) Shaded pole induction motor.

State the working principle of I ø transformer.

Description : State the working principle of I ø transformer.

Last Answer : Working principle of transformer : Transformer works on the principle of mutual electromagnetic induction. When AC voltage is applied to the primary winding of a transformer it causes ac current to flow ... in the secondary winding. The current flows in the secondary circuit if load is connected.

With the help of waveforms and phasor diagrams, show the phase relationship between voltage and current in pure inductive circuit.

Description : With the help of waveforms and phasor diagrams, show the phase relationship between voltage and current in pure inductive circuit.

Last Answer : Phasor Diagram:  

List the types of induced emf.

Description : List the types of induced emf.

Last Answer : The types of induced emf are : i) Statically induced emf , ii) Dynamically induced emf

Define the following terms: i) Magnetic flux density, ii) Reluctance, iii) Magneto-motive force, iv) Permeance.

Description : Define the following terms: i) Magnetic flux density, ii) Reluctance, iii) Magneto-motive force, iv) Permeance.

Last Answer : (i) Magnetic flux density (B): It is the magnetic flux per unit area measured at right angles to the flux path. (Its unit is weber/m2 or tesla).  (ii) Reluctance: It is the ... flux to set up through it and it is reciprocal of reluctance. Permeance = 1/ Reluctance. Unit: weber/ampere.

Who first noticed electromagnetism ?

Description : Who first noticed electromagnetism ?

Last Answer : : Scientist Orested first noticed electromagnetism.

A particular device uses electromagnetism by using electricity to move magnets. The magnets in this device are than used to work. Which device uses electromagnetism In this way?

Description : A particular device uses electromagnetism by using electricity to move magnets. The magnets in this device are than used to work. Which device uses electromagnetism In this way?

Last Answer : An electric motor

Dipoles in any electric field undergo a) Magnetism b) Electromagnetism c) Magnetisation d) Polarisation

Description : Dipoles in any electric field undergo a) Magnetism b) Electromagnetism c) Magnetisation d) Polarisation

Last Answer : d) Polarisation

Who founded and named the science of electromagnetism?

Description : Who founded and named the science of electromagnetism?

Last Answer : Andre Marie Ampere

The branch of physics which deals with the charges at rest: (a) Current electricity (b) Electromagnetism (c) Electrostatics (d) Nuclear physics

Description : The branch of physics which deals with the charges at rest: (a) Current electricity (b) Electromagnetism (c) Electrostatics (d) Nuclear physics

Last Answer : (c) Electrostatics

Gauss' law of electricity, Gauss' law of magnetism, Faraday's law of induction, and Amperes' law form the basic equations of electromagnetism. This combination is collectively known as: w) Coulomb's equations x) Volta's equations y) Fermi's equations z) Maxwell's equations

Description : Gauss' law of electricity, Gauss' law of magnetism, Faraday's law of induction, and Amperes' law form the basic equations of electromagnetism. This combination is collectively known as: w) Coulomb's equations x) Volta's equations y) Fermi's equations z) Maxwell's equations

Last Answer : ANSWER: Z -- MAXWELL'S EQUATIONS

How is electromagnetism used today?

Description : How is electromagnetism used today?

Last Answer : The base of electrical engineering is electromagnetism. You found electromagnetism everywhere in a electrical devices around you.

Define magnetic flux density and state its formula.

Description : Define magnetic flux density and state its formula.

Last Answer : The magnetic flux per unit area is called as magnetic flux density. Magnetic flux density is denoted by B. The formula for magnetic flux density is Weber per metre square or Tesla. Mathematically ... the unit of magnetic flux density is Weber per metre square which is also called as Tesla.

Which of the following statements are true? i) reactive current is necessary to build up the flux for the magnetic field of inductive devices ii) some portion of reactive current is converted into work iii) the cosine of angle between kVA and kVAr vector is called power factor iv) the cosine of angle between kW and kVA vector is called power factor a) i & iv b) ii & iii c) i & iii d) iii & iv

Description : Which of the following statements are true? i) reactive current is necessary to build up the flux for the magnetic field of inductive devices ii) some portion of reactive current is converted into work iii) the cosine of angle ... called power factor a) i & iv b) ii & iii c) i & iii d) iii & iv

Last Answer : a) i & iv

Define the terms: (i) Lamp efficiency (ii) Luminous flux (iii) Luminaire (iv) Colour Rendering Index.

Description : Define the terms: (i) Lamp efficiency (ii) Luminous flux (iii) Luminaire (iv) Colour Rendering Index. 

Last Answer : i) Lamp efficiency or luminous efficiency: It is the ratio of luminous flux emitted by a lamp to the power consumed by the lamp. It is a reflection of efficiency of energy conservation ... of surfaces illuminated by a given source compare to those of the same surface under reference illuminant.

Define the following terms and state their units: (i) Luminous intensity, (ii) Luminous flux

Description : Define the following terms and state their units: (i) Luminous intensity, (ii) Luminous flux

Last Answer : i) Luminous intensity: This is defined as the luminous flux emitted into a solid angle of space in a specific direction. Its unit is the candela.  OR  The luminous flux per unit solid angle ( ... energy radiated by the light source in all direction. The unit of luminous flux is lumen (lm) 

Define : i) MMF ii) Reluctance iii) Fringing iv) Leakage flux

Description : Define : i) MMF ii) Reluctance iii) Fringing iv) Leakage flux

Last Answer : i) MMF:  It is the force that drives magnetic flux through magnetic circuit. It is measured in amp-turns.  ii) Reluctance (s) :-  Reluctance is the property of the substance ... through the magnetic circuit, leaks through the air surrounding the core. This flux is called as leakage flux.

Define: (i) Ore (ii) Flux

Description : Define: (i) Ore (ii) Flux 

Last Answer : Ore: The mineral from which the metal is conveniently and economically extracted is known as ore.  Flux: ‘A substance which is used to remove the gangue from ore is called flux’.

iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through its plane. b)rotate to minimize the magnetic flux through its plane.c) not experience any torque since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Description : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through ... since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Last Answer : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel ... d) experience the constant torque equal to NBIA

Which of the following figure shown the magnetic flux denstiy b at a distance r from a long straight rod carrying a steady current I ?

Description : Which of the following figure shown the magnetic flux denstiy b at a distance r from a long straight rod carrying a steady current I ?

Last Answer : Which of the following figure shown the magnetic flux denstiy b at a distance r from a long straight rod carrying a steady current I ? A. B. C. D.

Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure. `otimes` direction indicates a direction perpendicular

Description : Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure. `otimes` direction indicates a direction perpendicular

Last Answer : Magnetic flux in a circular coil of resistance `10Omega` changes with time as shown in figure ... to paper inwards. Match the following table.