By increasing impurity content in the metal alloy the residual resistivity always

1 Answer

Answer :

By increasing impurity content in the metal alloy the residual resistivity always increases.

Related questions

Last Answer : The resistivity of a metal is a function of temperature because the amplitude of vibration of the atoms varies with temperature.

Description : When a sample of germanium and silicon having same impurity density are kept at room temperature then Resistivity of silicon will be higher than that of germanium, Why?

Last Answer : Ans-The answer is simple. Consider the PN diode for Ge 0.3eV is the breakdown voltage and in the case of Si its 0.7eV since the impurities are added in the same amount the bond due to the other atoms of the Si makes it resistive compared to the Ge.. thats all!

Last Answer : The impurity atoms is semiconductors reduce the energy gap.

Last Answer : Low resistivity materials are used in transformer, motor and generator windings, transmission and distribution lines, house wiring.

Last Answer : Addition of 0.3 to 4.5% silicon to iron increases the electrical resistivity of iron.

Description : High resistivity materials are used in?

Last Answer : High resistivity materials are used in precision instruments, heating elements, motor starters, incandescent lamps.

Description : What length of an alloy wire of resistivity 5.0x10^-7 Ωm and diameter 0.50mm is required to make a standard 6.0Ω resistor?

Last Answer : Interesting homework question. I’m not knowledgeable about physics, but putting myself in the shoes of someone who is.. Why don’t you post the answer that you got, and show your work, and ask us where you went wrong on the problem.

Description : Solder is an alloy of?

Last Answer : Solder is an alloy of tin and lead.

Description : If the impurity in a metal has a greater affinity for oxygen and is more easily oxidised than the metal, then the purification of metal may be carried

Last Answer : If the impurity in a metal has a greater affinity for oxygen and is more easily oxidised than ... B. electrorefining C. Zone refining D. POILING

Description : A metal contains, metal oxide as impurity. The method used to refine this metal is

Last Answer : A metal contains, metal oxide as impurity. The method used to refine this metal is A. Poling B. Liqation C. Cupellation D. Distallation

Description : Arrange the following in the order of increasing volume `:` (A) Tidal volume (B ) Residual volume (C ) Inspiratory reserve volume (D ) Vital capacity

Last Answer : Arrange the following in the order of increasing volume `:` (A) Tidal volume (B ) Residual volume (C ) Inspiratory reserve ... , D, C, B D. A, D, B, C

Description : Addition of __________ to the steel helps in increasing the residual magnetism in steel used for making magnets. (A) Chromium (B) Nickel (C) Tungsten (D) Cobalt

Last Answer : (D) Cobalt

Description : What is the effect of salt content in moisture on resistivity?

Last Answer : The resistivity decreases and the salt content is expressed in percent by weight of the contained moisture. It will be noted that the curve flattens off at about 5% salt content and a further increase in salt content gives little decrease in the soil resistivity. 

Description : What is the effect of moisture content on earth resistivity?

Last Answer : The moisture content is expressed in percent by weight of dry soil. Dry earth weights about 1440 kg per cubic meter and thus 10% moisture content is equivalent to 144 kg of water per cubic ... is very little affected. Below 20%, the resistivity increases very abruptly with the decrease in moisture.

Description : Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : When the nurse prepares to give a bolus tube feeding to the patient and determines that the residual gastric content is 150 cc, her best action is to a) reassess the residual gastric content in ... residual exceeds 100 cc, the tube feeding should be withheld at that time, but not indefinitely.

Last Answer : a) reassess the residual gastric content in 1 hour. If the gastric residual exceeds 100 cc 2 hours in a row, the physician should be notified.

Description : Self polymerising acrylic resins differ from heat cured resins because they exhibit: A. Higher molecules weight B. Higher content of residual monomers

Last Answer : B. Higher content of residual monomers

Description : Resistance of a metal rod does not depend on which of the following ? 1) ... resistivity 2) density 3). Length 4), warmth ..... Explain it in a little details ?

Last Answer : Answer : On its density. Because it depends on how close or how far the atom must be seen.

Description : The resistance of a strip of copper of rectangular cross-section is 2Ω. A metal of resistivity twice that of copper is coated on its upper surface to a thickness equal to that of copper strip. The resistance of composite strip will be

Last Answer : The resistance of a strip of copper of rectangular cross-section is 2Ω. A metal of resistivity twice that of copper is coated on its upper surface to a thickness equal to that of copper strip. The resistance of composite strip will be 4/3Ω.

Last Answer : Superconducting metal in superconducting state has a relative permeability of zero.

Last Answer : The conductivity of a metal is determined by the electronic concentration and the mobility of the free electrons.

Description :  The metal having the lowest temperature coefficient of resistance is

Last Answer : The metal having the lowest temperature coefficient of resistance is gold.

Description : Pitch (a product of coal tar distillation) is always mixed with creosote oil, when it is to be burnt in a burner, because (A) Its calorific value is very less (B) Tar neutralises the residual acids ... for its transportation through pipelines at economic pressure drop (D) All (A), (B) and (C)

Last Answer : (C) It reduces viscosity and imparts fluidity for its transportation through pipelines at economic pressure drop

Last Answer : In the left hand rule, forefinger always represents magnetic field.

Description : Mild steel is an alloy with carbon content a)0.25%. b)5% c)10%. d)25%

Last Answer : a)0.25%.

Description : Which of the following is an example of a solution Iron metal, iron ore, iron alloy, iron rust?

Last Answer : An iron alloy(Explanation): Iron metal is a pure substance, so it cannot be a solution, so it's not that one. An iron ore is found in nature and is iron chemically combined with other substances, so ... where you heat the metal to a liquid and mix in other metals like zinc to make pennies and stuff)

Description : How is a metal alloy a solution?

Last Answer : A metal alloy mixture of two or more metals and a solution is amixture of two or more substances so they are the same.

Description : What is an example of a alloy and how its properties may make it more useful than a pure metal?

Last Answer : Feel Free to Answer

Description : Solder metal is an alloy of – (1) lead and tin (2) lead and antimony (3) copper and zinc (4) copper and tin

Last Answer : (1) lead and tin Explanation: A solder is a fusible metal alloy of tin and lead with a melting point or melting range of 90 to 450°C, used in a process called soldering where it is melted to jain metallic surfaces. It is especially useful in electronics and plumbing.

Description : Type metal used in printing press is an alloy of - (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Last Answer : (2) lead and antimony Explanation: Lead and antimony are used to make type metals alloy. These type metals are used to make the character produced durable and tough.

Description : Type metal used in printing press is an alloy of – (1) lead and copper (2) lead and antimony (3) lead and bismuth (4) lead and zinc

Last Answer : (2) lead and antimony Explanation: In printing, type metal (sometimes called hot metal) refers to the metal alloys used in traditional type founding and hot metal typesetting. Lead is the main ... make castings with sharp details because molten lead shrinks and sags when it cools to a solid.

Description : German silver, an alloy, does not contain the metal – (1) Nickel (2) Zinc (3) Copper (4) Silver

Last Answer : (4) Silver Explanation: Nickel silver is a copper alloy with nickel and oft6n. zinc. The usual formulation is 60% copper, 20% nickel and 20% zinc. Nickel silver is named for its silvery ... under ASTM B 122) contain significant amounts of zinc, and are sometimes considered a subset of brass.

Description : In the illustrated amplifier, the base of the transistor is what type of material? EL-0022 A. N type B. P type C. metal oxide insulator D. alloy junction material

Last Answer : Answer: A

Description : Amalgam is an alloy in which the base metal i

Last Answer : Mercury

Description : Which of the following is not a copper based alloy with nickel? (A) German silver (B) Monel metal (C) Inconel (D) Constantan

Last Answer : (C) Inconel

Description : Which of the following alloys does not contain nickel? (A) Chlorinet - 2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Last Answer : (D) Babbitt metal

Description : Which of the following alloys does not contain nickel? (A) Chloro, et-2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Last Answer : (D) Babbitt metal

Description : Babbitt metal is not a (A) Tin base alloy (B) White metal (C) Lead base alloy (D) Pure metal

Last Answer : (D) Pure metal

Description : White metal is an alloy of (A) Lead, tin and cadmium (B) Copper, tin and zinc (C) Copper and lead (D) None of these

Last Answer : (D) None of these

Description : Which of the following is not an alloy of tin? (A) White-bearing metal (B) Pewter type metal (C) Soft solder (D) German silver

Last Answer : (D) German silver

Description : Which of the following is not a nickel based alloy? (A) Inconel (B) Hastelloys (C) Nimonics (D) Babbitt metal

Last Answer : (D) Babbitt metal

Description : Which of the following is universally employed as the low expansion metal in the bimetallic thermometer, which is an iron-nickel alloy containing 36% nickel and has very low co-efficient of expansion (1/20th of ordinary metals) ? (A) Invar (B) Constantan (C) Chromel (D) Alumel

Last Answer : (A) Invar

Description : Which of the following is a light alloy? (A) Monel metal (B) Dow metal (C) German silver (D) Babbitt meta

Last Answer : (B) Dow metal

Description : Which of the following is not a non-ferrous alloy? (A) Meehanite (B) Magnalium (C) Gun metal (D) Muntz metal

Last Answer : (A) Meehanite

Description : Babbitt metal used for bearings is a _________base alloy. (A) Tin (B) Lead (C) Aluminium (D) Copper

Last Answer : (A) Tin

Description : Metalloid is (A) Highly electronegative in nature (B) An element which exhibits the properties of both metal & non-metal (C) An alloy (D) All (A), (B) and (C)

Last Answer : (B) An element which exhibits the properties of both metal & non-metal

Description : Monel metal is an alloy of (A) Molybdenum and nickel (B) Nickel and copper (C) Molybdenum and aluminium (D) Molybdenum and zinc

Last Answer : (B) Nickel and copper

Description : Which of the following is not an alloy of copper? (A) Muntz metal (B) Admiralty gun metal (C) German silver (D) Pewter metal

Last Answer : (D) Pewter metal

Description : Gun metal is an alloy of (A) Nickel, tin and copper (B) Copper, tin and zinc (C) Copper, phosphorus and nickel (D) Manganese, phosphorus and nickel

Last Answer : (B) Copper, tin and zinc

Description : Metalloid is (A) An element, which exhibits the properties of both metal & non metal (B) Highly electronegative in nature (C) An alloy (D) All (A), (B) & (C)

Last Answer : (A) An element, which exhibits the properties of both metal & non metal