Explain placement, routing, and sizing.

Explain placement, routing, and sizing.
by

1 Answer

Answer :

Placement: The task of placing and orienting every transistor somewhere on IC.

Routing: The task of running wires between the transistors without inserting other wires or transistors.

Sizing: The task of deciding how big each wire and transistor will be larger wires and transistor provide better performance but consume more power and require more silicon area.

by

Related questions

How are area rugs sized? Can I trust the dimensions quoted?

Description : How are area rugs sized? Can I trust the dimensions quoted?

Last Answer : When I was buying one recently, the rug size would be listed as 8×5 in big print and then in the specifications some were 7’9” x5. Not all were listed that way though, so I had to really look and ensure the size as my area was very specific.

Which size comes after softball size?

Description : Which size comes after softball size?

Last Answer : grapefruit.

How do I decide what size hat my husband should wear?

Description : How do I decide what size hat my husband should wear?

Last Answer : Maybe i am old fashioned. I have the opinion that mens’ clothing ought to be chosen by the wearer-especially something so visible like a hat. Hats say so much about a person; shouldn’t he be the one to decide?

Do you have any simple tricks for keeping rings on fingers?

Description : Do you have any simple tricks for keeping rings on fingers?

Last Answer : Get ring guards that make them fit more tightly.

How big is your average black hole?

Description : How big is your average black hole?

Last Answer : answer:All you can measure is its motion and the effect it has on the surrounding space. To that end the most massive black hole to date is NGC 4889 and weighs in at somewhere in the ... it begins to do very odd things to time and space; you might find this Discover article interesting.

What’s the typical size of a SaaS or Web2.0 DB?

Description : What’s the typical size of a SaaS or Web2.0 DB?

Last Answer : I dont think you can answer this without some idea of content and user base range.

Who has some experience with the fluther t-shirt sizing?

Description : Who has some experience with the fluther t-shirt sizing?

Last Answer : Bonus: I would love to give my woman’s navy long-sleeved shirt (XL) to the first person here who asks nicely. Zazzle told me to find it a nice home. PM me with contact info. Check measurements at the Zazzle site.

Are American Apparel hoodies same sizing as AA shirts?

Description : Are American Apparel hoodies same sizing as AA shirts?

Last Answer : answer:I shop there regularly, in-store and online, and sometimes their sizing is a little wacky or inconsistent depending on the particular design. But pretty much all my stuff (lots of tee shirts and ... set of items is any different than their other stuff when it comes to sizing. Probably not.

Is there a code for CSS/Javascript to keep your contents in place when re-sizing a window?

Description : Is there a code for CSS/Javascript to keep your contents in place when re-sizing a window?

Last Answer : Is your site fixed width?

Why is women's clothing sizing so arbitrary?

Description : Why is women's clothing sizing so arbitrary?

Last Answer : It's not at all arbitrary. It is carefully designed to be confusing because marketers don't want larger women to be turned off by plus sized clothing, and they don't want young, skinny teenagers to be put off ... a size 4. Real women are generally around a 14 to 16, but they don't want to know it.

What is up with the variation in sizing these days?

Description : What is up with the variation in sizing these days?

Last Answer : I do see this happening too!! And sometimes mirrors can make you look different! You know what? I bet sizes were wayyy different back then too. Like, medium was a large back then… Or just like food portions- there way bigger now then back then. Its just whats happening to our society.

What are great new home gifts for an older couple who are down sizing?

Description : What are great new home gifts for an older couple who are down sizing?

Last Answer : Gift certificates can be very thoughtful, as they allow the couple to get what fits their new home. Wine or flowers or a nice dessert are a nice gesture too. Offer baked goods or ... stuff, but something that eliminates the need to cook will be appreciated. Also consider restaurant gift cards.

How would I go about sizing my pictures to fit in the Family Tree Picture Frame?

Description : How would I go about sizing my pictures to fit in the Family Tree Picture Frame?

Last Answer : You need to get the dimensions on the Picture frame and print the picture to fit that.

What are the differences in sizing for American and European women's jeans?

Description : What are the differences in sizing for American and European women's jeans?

Last Answer : In American culture, we use a sizing chart that coordinates with assigned sizes. The European scale of measurement for clothing sizes directly relates the measurements in centimeters to the desired sizes.

What is the sizing like for the Lee jeans?

Description : What is the sizing like for the Lee jeans?

Last Answer : SIZE 30, 32, 33, 34, 36, 38 ARE AVAILABLE

Old Navy clothes seem to run big, where can I find a sizing chart?

Description : Old Navy clothes seem to run big, where can I find a sizing chart?

Last Answer : Yes, Old Navy clothes do run big, almost without exception, so at least that's something you can count on. You can find a sizing chart on Old Navy's website. Old Navy actually makes their size ... says "size chart." This is great since your size may be different in skirts as opposed to pants.

Understanding Home Generator Sizing?

Description : Understanding Home Generator Sizing?

Last Answer : A home generator can be a useful tool in emergencies. When buying a generator, it's important to find a unit that will power all the necessary appliances and utilities in a home. ... kilowatt generator. A whole-home generator will usually be 10 kilowatts and will require professional installation.

Sizing of very fine particles of the order of 5 to 10 microns is done by elutriation, which is a __________ operation. (A) Clarification(B) Sedimentation(C) Flocculation(D) Classification

Description : Sizing of very fine particles of the order of 5 to 10 microns is done by elutriation, which is a __________ operation. (A) Clarification (B) Sedimentation (C) Flocculation (D) Classification

Last Answer : (D) Classification

Separation of materials into products based on the difference of theirsizes is called(A) Sizing(B) Sorting(C) Classification(D) Flocculation

Description : Separation of materials into products based on the difference of theirsizes is called (A) Sizing (B) Sorting (C) Classification (D) Flocculation

Last Answer : (A) Sizing

For sizing of fine materials, the most suitable equipment is a (A) Trommel (B) Grizzly (C) Shaking screen (D) Vibrating screen

Description : For sizing of fine materials, the most suitable equipment is a (A) Trommel (B) Grizzly (C) Shaking screen (D) Vibrating screen

Last Answer : (D) Vibrating screen

Separation of solid particles based on their densities is called (A) Sizing (B) Sorting (C) Clarification (D) Dispersion

Description : Separation of solid particles based on their densities is called (A) Sizing (B) Sorting (C) Clarification (D) Dispersion

Last Answer : (B) Sorting

Separation of materials of the same density based on their sizes by using then-different rates of flow is called (A) Sorting (B) Sizing (C) Flocculation (D) Elutriation

Description : Separation of materials of the same density based on their sizes by using then-different rates of flow is called (A) Sorting (B) Sizing (C) Flocculation (D) Elutriation

Last Answer : (B) Sizing

Which of the following are included in the finishing operations for porous bearing? [IES-2005] 1. Infiltration 2.Sizing 3.Heat treatment 4.Coining Select the using the code given below: (a) 1 and 2 (b) 2 and 3 (c) 2 and 4 (d) 1 and 4

Description : Which of the following are included in the finishing operations for porous bearing? [IES-2005] 1. Infiltration 2.Sizing 3.Heat treatment 4.Coining Select the using the code given below: (a) 1 and 2 (b) 2 and 3 (c) 2 and 4 (d) 1 and 4

Last Answer : (a) 1 and 2

Sizing material is incorporated in paper to(A) Impart resistance to penetration by liquids(B) Increase its thickness(C) Increase its flexibility & opacity(D) Increase its brightness

Description : Sizing material is incorporated in paper to (A) Impart resistance to penetration by liquids (B) Increase its thickness (C) Increase its flexibility & opacity (D) Increase its brightness

Last Answer : (A) Impart resistance to penetration by liquids

Which of the following is the first step in sizing a window? a) Point to the title barb) Pull down the view menu to display the toolbarc) Point to any corner or borderd) Pull down the view menu and change to large iconse) None of these

Description : Which of the following is the first step in sizing a window? a) Point to the title bar b) Pull down the view menu to display the toolbar c) Point to any corner or border d) Pull down the view menu and change to large icons e) None of these

Last Answer : a) Point to the title bar

______ sizing is possible when the system load is cyclical or in some cases when there are predictable bursts or spikes in the load. a) Left b) Right c) Top d) All of the mentioned

Description : ______ sizing is possible when the system load is cyclical or in some cases when there are predictable bursts or spikes in the load. a) Left b) Right c) Top d) All of the mentioned

Last Answer : Right

When sizing a cooling tower the highest anticipate__________ should be used? • Dry bulb • Wet bulb • Both dry and wet bulb • None of the above

Description : When sizing a cooling tower the highest anticipate__________ should be used? • Dry bulb • Wet bulb • Both dry and wet bulb • None of the above

Last Answer : Wet bulb

What are some guidelines for sizing a PSV for a fire scenario on a vessel in a refinery service?

Description : What are some guidelines for sizing a PSV for a fire scenario on a vessel in a refinery service?

Last Answer : Sizing a PSV on your vessel is a matter of calculating how much heat is inputted from the fire. API-520 uses Q = FA0.82 where Q is BTU/hr, F is the insulation factor (commonly taken as 1.0 but ... have a BLEVE. Not something, you want to be around. As an added point to the information above, if

The turnover rate a. is the percentage of workers who left the company last year, excluding down-sizing. b. does not ignore down-sizing factors. c. is not driven by recruiting spend or training days. d. is rooted in unavoidable factors like retirement, relocation and weeding out poor workers (about 5%). e. a and d.

Description : The turnover rate a. is the percentage of workers who left the company last year, excluding down-sizing. b. does not ignore down-sizing factors. c. is not driven by recruiting spend or training ... factors like retirement, relocation and weeding out poor workers (about 5%). e. a and d.

Last Answer : e. a and d.

Explain different models that are used to describe embedded system.

Last Answer : Common computation models: Sequential program model Statements, rules for composing statements, semantics for executing them Communicating process model ... Object-oriented model For breaking complex software into simpler, well-defined pieces

Explain the advantages and disadvantages of using memory I/O and standard I/O.

Description : Explain the advantages and disadvantages of using memory I/O and standard I/O.

Last Answer : Memory mapped I/O and standard I/O are the two methods for communicating microprocessor with peripherals. Processor talks to both memory and peripheral using the same bus.Two ways to talk to a peripheral. ... of standard I/O is no loss of memory addresses to the use as I/O addresses.

Explain parallel and wireless protocols.

Description : Explain parallel and wireless protocols.

Last Answer : Parallel protocols: PCI bus (Peripheral Components Interconnect): PCI stands for Peripheral Components Interconnect. PCI bus is used as a communication line to transmit signals and data ... provide the basis for wireless network products using the Wi-Fi brand.

Explain memory hierarchy.

Description : Explain memory hierarchy.

Last Answer : Memory hierarchy: Main memory is large, inexpensive, slow memory stores entire program and data. Cache memory is small, expensive, fast memory stores copy of likely accessed parts of large ... In memory hierarchy the smaller memory is faster and larger memory storage is slower.

Explain memory write ability and storage permanence with suitable diagram.

Description : Explain memory write ability and storage permanence with suitable diagram.

Last Answer : Write ability and storage permanence of memories: Write ability is the manner and speed at which memory can be written. Storage permanence is the ability of memory to hold stored bits ... Holds bits after power is no longer supplied. High end and middle range of storage permanence.

Explain the various steps involved in designing a custom single-purpose processor.

Description : Explain the various steps involved in designing a custom single-purpose processor.

Last Answer : A single purpose processor is a digital circuit designed to execute exactly one program. It is also known as co-processor, accelerator or peripheral. It contains only ... for small quantities. Performance may not match general-purpose processors for same applications.

Explain Inter-process Communication (IPC) using mailbox/queue.

Description : Explain Inter-process Communication (IPC) using mailbox/queue.

Last Answer : Inter-process communication using mailbox: Mailbox is the Interprocess communication mechanism. A process puts a data message for another process in the mailbox. Mailbox is also called as message exchange. ... a message. In mailbox IPC the sender need not to know the name of the receiver.

Explain arbitration. What is priority arbitrator?

Description : Explain arbitration. What is priority arbitrator?

Last Answer : Arbitration: IF multiple peripherals are connected to microprocessor or DMA controller or any resource and they request services simultaneously so which peripheral will get serviced first this is ... Peripherals make requests to arbiter and arbiter makes requests to the resource.

Explain FSM and concurrent process with example.

Description : Explain FSM and concurrent process with example.

Last Answer : Finite State Machine (FSM): Finite state machine is a machine which have a transition from state to state. The system have some number of states and at a time the system can ... Y seconds. In sequential execution, the processor executes single task which causes poor processor utilization.

What is design technology? Explain top down design process.

Description : What is design technology? Explain top down design process.

Last Answer : Design technology: Design technology is the manner in which we convert our concept desired system into an implementation. The three main design technologies are 1. Compilation/Synthesis ... general purpose processors and A Gate-level Netlist for special-purpose processors.

Explain data transfer mechanism in I2C protocol.

Description : Explain data transfer mechanism in I2C protocol. Compare it with CAN and USB protocol based on bit rate and area of applications.

Last Answer : I2C (Inter-Integrated Circuit): I2C stands for Inter-Integrated Circuit. I2C is a serial protocol. It was developed by Philips Semiconductor. I2C bus have two communication lines. One is serial data ( ... Mbps this is used for lower speed devices. Using USB we can connect upto 127 devices.

Explain Keypad controller.

Description : Explain Keypad controller.

Last Answer : Keypad Controller: It's a device which interfaces between the computer and keyboard. That is a input device and used for transfer the data to connected device.

Explain how UART is used for communication highlighting the advantages of UART.

Last Answer : UART takes parallel data and transmits serially and UART receives serial data and converts to parallel.A simple UART may possess1.Some configuration registers and2.Two independently operating processors, one ... must write data to the transmit register and/or read data from the received register.

Explain the concept of semaphore. How does this help us in solving the shared data problem in embedded system?

Last Answer : A semaphore is called binary semaphore when its value is 0, it is assumed that it has been taken (or accepted) & when its value is 1, it is assumed that it has been released & no ... that are not themselves reentrant.3. A reentrant function may does not use the hardware in a nonatomic way.

What is watchdog timer ? Explain the implementation of time out for ATM with block diagram and program.

Description : What is watchdog timer ? Explain the implementation of time out for ATM with block diagram and program.

Last Answer : A special type of timer is a watchdog timer, which will reset the system after a predefined timeout. Watchdog timer reset timer every X time unit, else timer generates a signal ... be loaded into timereg. This is to prevent erroneous software from unintentionally resetting the watchdog timer.

Explain Shared memory, Mutex, Message passing and Dead lock.

Last Answer : Shared memory :For sharing of data faster and communication between programs, we use shared memory. Shared memory can be used with multiprocessors and single processors. Means Program ... No resource preemption4. Circular waitIf the four conditions occur simultaneously then the deadlock occurs.

Explain the role of scheduler in RTOS. Compare pre-emptive and non-preemptive scheduling techniques.

Last Answer : The scheduler is very important in Real-Time Operating System (RTOS). Selection of tasks for execution is provided by the scheduler. Which task to execute when it is provided by the ... . Non-preemptive scheduling is simple.Preemptive scheduling is flexible while non-preemptive scheduling is rigid.

Explain Host/target linked setup.

Last Answer : There are three different host/target architecture for embedded Linux.Linked setupRemovable storage setupStandalone setup1. Linked setup :In this host/target architecture, the host and ... cross-platform development environment.The target contains bootloader, kernel, and root filesystem.

List and explain the various functions supported by Linux/RTLinux.

Description : List and explain the various functions supported by Linux/RTLinux.

Last Answer : Various functions of RTLinux is as follows: Interrupt handling functions

Explain the various feature of Linux that are useful for embedded system design.

Last Answer : Various features of Linux that are used in embedded systems are as follows : Linux is multiuser operating system. Linux is open source and free. Linux can be ... Linux supports handling of errors. Real-time Linux supports the group scheduling functions.

Explain the following design matrix with suitable example.

Description : a) Time to market b) The performance

Last Answer : a) Time to market :Time to market is the time from development of an embedded system to sell it to customers is called time to market. For more profit, the time to market should be ... losses due to delayed entry.b) Performance :Latency and throughput are the two main measures of performance.