Capacitive Load What ?

by

1 Answer

Answer :

yes Load Charge Savings By Or Power Factor Of The value Increases Him Capacitive Load Says Capacitive Load That Current Flowing Is So Capacitive Current.
by

Related questions

What is the power factor in pure resistive , capacitive , inductive load ?

Description : What is the power factor in pure resistive , capacitive , inductive load ?

Last Answer : Answer : Power factor cosΦ = 1 in pure resistive load, cosΦ = 0 in capacitive load , cosΦ = 0 in inductive load .

Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Description : Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Last Answer : C. resistive load at the resonant frequency

In order to get maximum power transfer from a capacitive source, the load must?

Description : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Last Answer : In order to get maximum power transfer from a capacitive source, the load must? A.have a capacitive reactance equal to circuit resistance B.have an impedance that is the complex conjugate of the source impedance C.be as capacitive as it is inductive D.none of the above

Can I use a WACOM stylus with any capacitive touchscreen tablet?

Description : Can I use a WACOM stylus with any capacitive touchscreen tablet?

Last Answer : answer:As far as just tablets go, the HTC Flyer has this feature – I don’t think it’s as well implemented as it is on the actual Wacom tablets, but at the moment it’s the closest to what you describe. The other thing to consider is a Tablet-PC, although in my experience these are clunky as hell.

What is the expression of capacitive reactance ?

Description : What is the expression of capacitive reactance ?

Last Answer : Capacitive reactance = XC

What is the capacitive resistance of a 0.04 microfarad capacitor in ac circuit that has a frequency of 1000 hz?

Description : What is the capacitive resistance of a 0.04 microfarad capacitor in ac circuit that has a frequency of 1000 hz?

Last Answer : The capacitive reactance is approximately 4 kΩ .

The electrical diagram shown in the illustration is used to depict a/an ____________. EL-0015 A. resistance circuit B. inductive circuit C. stepdown circuit D. capacitive circuit

Description : The electrical diagram shown in the illustration is used to depict a/an ____________. EL-0015 A. resistance circuit B. inductive circuit C. stepdown circuit D. capacitive circuit

Last Answer : Answer: D

An AC circuit has a capacitive reactance of 30 ohms in addition to an inductive reactance of 40 ohms connected in series. What is the reactance of the circuit? A. 8.37 ohms B. 10.00 ohms C. 50.00 ohms D. 70.00 ohms

Description : An AC circuit has a capacitive reactance of 30 ohms in addition to an inductive reactance of 40 ohms connected in series. What is the reactance of the circuit? A. 8.37 ohms B. 10.00 ohms C. 50.00 ohms D. 70.00 ohms

Last Answer : Answer: B

In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter B. help the windings to cool to ambient temperature C. release any residual capacitive charge from the windings D. help the windings to cool to the same temperature as the ground test connection

Description : In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter ... the windings D. help the windings to cool to the same temperature as the ground test connection

Last Answer : Answer: C

The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual magnetism C. kept warm by using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Description : The insulation of electric generators during short idle periods should be _____________. A. allowed to cool slowly to ambient temperatures B. flashed with direct current to remove any residual ... using strip or space heaters D. relieved of all capacitive charge by grounding the conductors

Last Answer : Answer: C

In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes more efficient at lower capacitance. C. the arrangement allows the coupling of the signal while it isolates the biasing of each stage. D. good frequency response.

Description : In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes ... of the signal while it isolates the biasing of each stage. D. good frequency response.

Last Answer : Answer: C

Discharge switches are often located on hand-driven meggers. The purpose of these switches is to discharge capacitive charges stored in the _____________. A. megger hand generator B. megger movement coils C. tested equipment while conducting test D. tested equipment after testing

Description : Discharge switches are often located on hand-driven meggers. The purpose of these switches is to discharge capacitive charges stored in the _____________. A. megger hand generator B. megger movement coils C. tested equipment while conducting test D. tested equipment after testing

Last Answer : Answer: D

Voltage will always lead current in a/an ______________. A. capacitive circuit B. inductive circuit C. magnetic circuit D. resistive circuit

Description : Voltage will always lead current in a/an ______________. A. capacitive circuit B. inductive circuit C. magnetic circuit D. resistive circuit

Last Answer : Answer: B

Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Description : Decreasing the frequency in a capacitive circuit while maintaining a constant circuit voltage, will result in a/an _____________. A. increase in apparent power B. decrease in circuit current C. decrease in capacitive reactance D. decrease in total impedance

Last Answer : Answer: B

An AC circuit has capacitance arranged in series. If the line voltage remains constant, the capacitive reactance value can be varied by changing the _____________. A. line frequency B. resistance C. number of commutating poles D. number of interpoles

Description : An AC circuit has capacitance arranged in series. If the line voltage remains constant, the capacitive reactance value can be varied by changing the _____________. A. line frequency B. resistance C. number of commutating poles D. number of interpoles

Last Answer : Answer: A

When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Description : When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Last Answer : Answer: B

The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the collector of 'Q1' C. acts as a low capacitive reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Description : The component labeled 'CR1' in the circuit shown in the illustration __________________. EL-0085 A. varies its anode/cathode polarity depending on 'RL' current B. rectifies the varying voltage from the ... reactance to smooth ripple D. establishes a constant reference voltage for the base of 'Q1'

Last Answer : Answer: D

The horizontal line which cuts across 'L1' shown in figure 'A' of the illustration indicates a/an ______________. EL-0091 A. iron core B. saturable core C. air gap D. capacitive coupling

Description : The horizontal line which cuts across 'L1' shown in figure 'A' of the illustration indicates a/an ______________. EL-0091 A. iron core B. saturable core C. air gap D. capacitive coupling

Last Answer : Answer: B

The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Description : The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Last Answer : Answer: C

The ratio of the effective value of the counter EMF in volts, to the effective value of the current in amperes is called _____________. A. impedance factor B. capacitive reactance C. inductive reactance D. root mean square

Description : The ratio of the effective value of the counter EMF in volts, to the effective value of the current in amperes is called _____________. A. impedance factor B. capacitive reactance C. inductive reactance D. root mean square

Last Answer : Answer: C

AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Description : Noise that occurs via capacitive or inductive coupling in a cable. A. Crosstalk B. Quantizing noise C. Reference noise D. Tone interference

Last Answer : A. Crosstalk

What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Description : What is the reactance property at the input of a shorted quarter wavelength line? A. A parallel LC circuit B. A pure inductive reactance C. A series LC circuit D. A pure capacitive reactance

Last Answer : A. A parallel LC circuit

Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Description : Known as the technique for adding a series inductor at or near the center of an antenna element in order to cancel the capacitive reactance of an antenna. A. Dipole B. Center loading C. Reflector D. loading coil

Last Answer : D. loading coil

What are the methods of capacitive switching?

Description : What are the methods of capacitive switching?

Last Answer : • Opening of single capacitor bank • Closing of one capacitor bank against another

What is capacitance and capacitive reactance?

Description : What is capacitance and capacitive reactance?

Last Answer : Capacitance The property of a capacitor to store electrical energy in it, when it is connected to an electric supply is called capacitance. Unit for measurement is farad. Capacitor store an electric ... called capacitive reactance and it denoted by the letter XC. The unit for measurement is ohm.

Find the dissipation factor when series resistance is 5 ohm and capacitive resistance is 10 unit. a) 2 b) 0.5 c) 1 d) 0

Description : Find the dissipation factor when series resistance is 5 ohm and capacitive resistance is 10 unit. a) 2 b) 0.5 c) 1 d) 0

Last Answer : b) 0.5

LVDT used for displacement measurement is a/an __________ transducer. (A) Passive (B) Active (C) Capacitive (D) None of these

Description : LVDT used for displacement measurement is a/an __________ transducer. (A) Passive (B) Active (C) Capacitive (D) None of these

Last Answer : (A) Passive

For interrupting capacitive currents which Circuit Breaker (CB) is used a) SF6 CB b) Oil CB c) Vacuum CB d) Air blast CB

Description : For interrupting capacitive currents which Circuit Breaker (CB) is used a) SF6 CB b) Oil CB c) Vacuum CB d) Air blast CB

Last Answer : Ans: Vacuum CB

In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Description : In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Last Answer : Ans: All of the above

Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Description : Series capacitors are used to (a) compensate for line inductive reactance (b) compensate for line capacitive reactance (c) improve line voltage (d) none of the above

Last Answer : (a) compensate for line inductive reactance

What happens to capacitive reactance as frequency increases?

Description : What happens to capacitive reactance as frequency increases?

Last Answer : It decreases.

What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Description : What is the capacitive reactance across a point-contact diode as compared to a normal junction diode?

Last Answer : Lower.

Capacitive tuning by inserting a ring into the cavity slot of a magnetron is accomplished by what type of tuning mechanism?

Description : Capacitive tuning by inserting a ring into the cavity slot of a magnetron is accomplished by what type of tuning mechanism?

Last Answer : . A cookie-cutter tuner

Bridge used to measure both inductive and capacitive impedances at higher frequencies

Description : Bridge used to measure both inductive and capacitive impedances at higher frequencies

Last Answer : radio-frequency bridge

Describe working of capacitive discharge ignition (CDI) system

Description : Describe working of capacitive discharge ignition (CDI) system

Last Answer : Working of CDI system: It mainly consists of 6-12 V battery, ignition switch, DC to DC convertor, charging resistance, tank capacitor, Silicon Controlled Rectifier (SCR), SCR-triggering device; step ... of AC to DC charging device, signal conditioning and amplifying unit and control circuit.   

Draw and explain the working of inductive and capacitive sensors.

Description : Draw and explain the working of inductive and capacitive sensors.

Last Answer : Ans: Inductive Sensor: Diagram: Operation: An inductive sensor consist of a coil wound around a ferrous metallic core ,detector circuit and solid state output . With supply voltage ,oscillator operates to ... output device being ON or OFF. Capacitive Sensor: Diagram: Working  

State the working principle of capacitive sensor with neat diagram.

Description : State the working principle of capacitive sensor with neat diagram.

Last Answer : Explanation:-- Capacitance is an electrical property which is created by applying an electrical charge to two conductive objects with a gap between them. A simple demonstration is two ... materials. The other type measures thicknesses of nonconductive materials or the level of a fluid. 

Explain with sketch torque measurement using (i) Stroboscope method, (ii) Capacitive method.

Description : Explain with sketch torque measurement using (i) Stroboscope method, (ii) Capacitive method.

Last Answer : (i) Stroboscope method:-- Explanation : The arrangement of two flanges A and B placed at a distance on the shaft is as shown. Flange A carries a scale while flange a ... By applying a radiometric algorithm to the received signals, the signed relative angle between the rotors is calculated.

Give one application each of following transducer: (i) LVDT (ii) RVDT (iii) Capacitive (iv) Piezoelectric

Description : Give one application each of following transducer: (i) LVDT (ii) RVDT (iii) Capacitive (iv) Piezoelectric

Last Answer : i) LVDT ➢ LVDT used to measure force ➢ LVDT used to measure strain ➢ LVDT used to measure weight ➢ LVDT used to measure tension ➢ LVDT used to measure pressure ➢ The ... flow meters, non-destructive test (NDT) equipment's ➢ Piezoelectric materials are used in ultrasonic transducers.

Explain calibration of capacitive type level measurement.

Description : Explain calibration of capacitive type level measurement.

Last Answer : ➢ Calibration of capacitance type level transmitter 1. Remove the level transmitter from the system(tank). 2. check whether transmitter shows zero reading by connecting with multimeter otherwise release the ... rotate the span screw to 20ma. 3. Repeat these steps and check all readings

A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed

Description : A series combination of resistance 100 ohm and capacitance 50µf is connected in series to a 230 V, 50HZ supply. Calculate (i) Capacitive reactance (ii) Current (iii) Power factor (iv) Power consumed 

Last Answer : For RC series circuit

State working principle of capacitive type level sensor with diagram.

Description : State working principle of capacitive type level sensor with diagram. 

Last Answer : Principle of working : The capacitive level detector operates on the equation of parallel plate capacitor, i.e. Where, C = capacitance value in farad ε = dielectric constant d = distance between ... (ε ). This principle is used in the capacitance level gauge for detecting level change.

Time constant of a capacitive circuit

Last Answer : It is denoted as τ, tau and has the value of 1/RC. We

Explain concept of capacitive type proximity switch with neat schematic diagram.

Description : Explain concept of capacitive type proximity switch with neat schematic diagram.

Last Answer : Capacitive type proximity switch: A capacitive proximity switch is device that senses presence of metallic or nonmetallic objects. The internal circuit consists of an oscillator, threshold detection stage and ... in oscillation amplitude is detected and output switching device is turned on. 

Capacitive reactance formula

Description : Capacitive reactance

Last Answer : Capacitive reactance formula

Capacitive current formula

Description : Capacitive current

Last Answer : Capacitive current formula

Circuits with capacitive reactance X C alone

Last Answer : Circuits with capacitive reactance X C alone. Capacitive reactance X C values in series. There is no resistance or inductive reactance only capacitive reactance is there. Let two capacitive ... horizontal in phasor diagram. The total current I T leads voltage V A by 90 degree.

Describe capacitive type proximity switch with neat diagram.

Description : Describe capacitive type proximity switch with neat diagram.

Last Answer : Its a type of a switch controlled by action of storing energy and then releasing it.

What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is

Description : What happens to current flow in a capacitive circuit when the DC voltage across the capacitor is approximately equal to the source voltage?

Last Answer : Capacitor always charges up to the voltage of source. When the capacitor is charged to same as source voltage then there is no current flowing through the capacitor. The current through the capacitor is called displacement current.