The hot resistance of a bulb’s filament is higher than its cold resistance...

The hot resistance of a bulb’s filament is higher than its cold resistance because the temperature coefficient of the filament is:
by

2 Answers

Answer :

The hot resistance of a bulb’s filament is higher than its cold resistance because the temperature coefficient of the filament is: Positive.

by

Answer :

positive
by

Related questions

The hot resistance of the bulb's filament is higher than its cold resistance because...

Description : The hot resistance of the bulb's filament is higher than its cold resistance because the temperature co-efficient of the filament is?

Last Answer : This  is  because  resistance  of  a  conductor  increases  with  increase  in  temperature .

Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts.

Description : Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts. 

Last Answer : ANSWER: LOWER

The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Description : The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Last Answer : Ans:(b)

Full form of CFL used in place of electric bulbs is – (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Description : Full form of CFL used in place of electric bulbs is – (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Last Answer : (1) compact fluorescent lamp Explanation: A compact fluorescent lamp (CFL) is a fluorescent lamp designed to replace an incandescent lamp; some types fit into light fixtures formerly used for incandescent lamps.

The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Description : The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Last Answer : (B) Tungsten

There are three bulbs of 60W 100W and 200W which bulb has thickest filament. a. 100W b. 200W c. 60W d. All

Description : There are three bulbs of 60W 100W and 200W which bulb has thickest filament. a. 100W b. 200W c. 60W d. All

Last Answer : b. 200W

Full form of CFL used in place of electric bulbs is (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Description : Full form of CFL used in place of electric bulbs is (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Last Answer : compact fluorescent lamp

Will the filament resistance of a bulb be higher at normal temperature or in incandescent condition ?

Description : Will the filament resistance of a bulb be higher at normal temperature or in incandescent condition ?

Last Answer : As the resistance increases with increasing temperature, the resistance of the filament of the bulb will be higher than the normal temperature.

In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is filled with

Description : In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is filled with

Last Answer : In order to prevent the hot metal filament from getting burnt, when the electric current is switched on, the bulb is ... gas C. `CO_(2)` D. `Cl_(2)`

Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. when an electric bulb is switched on, the resistance of its tungsten filament increases. 2. the resistance of pure metals increases on heating. Which of the above statements is/are correct? (a) Both 1 and 2 (b) only 1 (c) only 2 (d) Neither 1 nor 2

Last Answer : Ans:(a)

A filament bulb `(500 W, 100 V)` is to be used in a `230 V` main supply. When a resistance `R` is connected in series, it works perfectly and the bulb

Description : A filament bulb `(500 W, 100 V)` is to be used in a `230 V` main supply. When a resistance `R` is connected in series, it works perfectly and the bulb

Last Answer : A filament bulb `(500 W, 100 V)` is to be used in a `230 V` main supply. When a resistance `R` is ... Omega` B. `46 Omega` C. `26Omega` D. `13 Omega`

What happens to the resistance of a filament if it is replaced by a shorter wire?

Description : What happens to the resistance of a filament if it is replaced by a shorter wire?

Last Answer : the resistance decreasesAPEX

Why is the negative-resistance magnetron often operated with reduced filament voltage?

Description : Why is the negative-resistance magnetron often operated with reduced filament voltage?

Last Answer : To reduce the effects of filament bombardment.

There are three 100 bulbs in parallel across 220 V.50 Hz line. If one bulb burns out:

Last Answer : There are three 100 bulbs in parallel across 220 V.50 Hz line. If one bulb burns out: Remaining two bulbs will produce light.

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

The hot resistance of a tungsten lamp is about 10 times the cold resistance. Accordingly, ...

Description : The hot resistance of a tungsten lamp is about 10 times the cold resistance. Accordingly, cold resistance of a 100 W, 200 V lamp will be

Last Answer : The hot resistance of a tungsten lamp is about 10 times the cold resistance. Accordingly, cold resistance of a 100 W, 200 V lamp will be 40 ohm.

Two electric bulbs rated 50 W and 100 W are glowing at full powr, when used in parallel with a battery of emf 120 V and internal resistance 10 `Omega`

Description : Two electric bulbs rated 50 W and 100 W are glowing at full powr, when used in parallel with a battery of emf 120 V and internal resistance 10 `Omega`

Last Answer : Two electric bulbs rated 50 W and 100 W are glowing at full powr, when used in parallel with a battery of emf 120 V ... power, is A. 6 B. 4 C. 2 D. 8

What two circuits one series and one parallel use light bulbs to provide resistance. Both circuits have the same number of light bulbs?

Description : What two circuits one series and one parallel use light bulbs to provide resistance. Both circuits have the same number of light bulbs?

Last Answer : Series circuit gives higher resistance compared to parallelcircuit.

Which one of the following bulbs has the least resistance? a. 100 watt b. 200 watt c. 300 watt d. 60 watt

Description : Which one of the following bulbs has the least resistance? a. 100 watt b. 200 watt c. 300 watt d. 60 watt

Last Answer : c. 300 wat

For a parallel connection of light bulbs, which of the following statements is correct? w) The resistance of each light bulb must be the same. x) If one goes out they all go out. y) Each of the light bulbs operates independently.

Description : For a parallel connection of light bulbs, which of the following statements is correct? w) The resistance of each light bulb must be the same. x) If one goes out they all go out. y) Each of the light bulbs operates independently.

Last Answer : ANSWER: Y -- EACH OF THE LIGHT BULBS OPERATES INDEPENDENTLY.

Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Description : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as?

Last Answer : Two bulbs of 500 W and 200 W rated at 250 V will have resistance ratio as 2 : 5.

whether axial filament in tail travels through its complete length or certain part? -Biology

Description : whether axial filament in tail travels through its complete length or certain part? -Biology

Last Answer : answer:

whether axial filament in tail travels through its complete length or certain part? -Biology

Description : whether axial filament in tail travels through its complete length or certain part? -Biology

Last Answer : answer:

The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain

Description : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : (A) higher temperature sensitivity (B) higher Poisson’s ratio (C) higher piezoresitive coefficient (D) higher magnetostrictive coefficient

Last Answer : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : higher piezoresitive coefficient

What is filament of spirogyra?

Description : What is filament of spirogyra?

Last Answer : Spirogyra is a genus of green algae that is commonly found in freshwater environments such as ponds, streams, and ditches. The filament of Spirogyra is a long, slender, multicellular structure ... , which occurs when the filament breaks into individual cells that can grow into new filaments.

Approximately when did car makers stop using two headlights (and start using one with a high beam filament)?

Description : Approximately when did car makers stop using two headlights (and start using one with a high beam filament)?

Last Answer : I’m sure that I’ve seen late-model BMW and Chevy cars with separate high/low beam headlights. And I’ve seen models from the 1970s which had single-lamp assemblies with the high and low beam filaments built into the lamp, as you suggest.

What is filament of a flower? -Biology

Description : What is filament of a flower? -Biology

Last Answer : answer:

What is filament of a flower? -Biology

Description : What is filament of a flower? -Biology

Last Answer : answer:

The filament of an electric bulb is made of which metal? -General Knowledge

Description : The filament of an electric bulb is made of which metal? -General Knowledge

Last Answer : The answer is 'Tungsten'

The filament of an electric bulb is made of which metal? -General Knowledge

Description : The filament of an electric bulb is made of which metal? -General Knowledge

Last Answer : answer:

The filament of a bulb is made up of -General Knowledge

Description : The filament of a bulb is made up of -General Knowledge

Last Answer : answer:

what does the filament do in the flower?

Description : what does the filament do in the flower?

Last Answer : it holds up the anther so the insects get to it quickly also itdevelopes the pollen and everythin gels thats there and i just gootmy hair done and tis pretty i and i go to east and my name is jalenholla back

Filament of electric bulb is made of which metal ?

Description : Filament of electric bulb is made of which metal ?

Last Answer : The filament of an electric bulb is made of tungsten metal.

Why is the filament of electric bulb made of tungsten ?

Description : Why is the filament of electric bulb made of tungsten ?

Last Answer : When electricity flows through the coil or filament of the thin wire of the bulb, it becomes very hot and radiates all around. Tungsten is a metal with the highest melting point and the highest tensile strength, making it a filament to make the bulb more durable.

What is filament ?

Description : What is filament ?

Last Answer : : Inside the bulb is a thin tungsten wire coil attached to both ends of the wire. This is called filament.

What is the filament of a diode called ?

Description : What is the filament of a diode called ?

Last Answer : The two electrodes in a diode valve emit an electron , called a cathode or filament.

What is Filament ?

Description : What is Filament ?

Last Answer : Filament means penis.

Which metal is used in bulp filament ?

Description : Which metal is used in bulp filament ?

Last Answer : Tungsten is used in the filament of bulp.

According to the sliding - filament model of muscle contraction, the molecules that moves to shorten a muscle are :-

Description : According to the sliding - filament model of muscle contraction, the molecules that moves to shorten a muscle are :-

Last Answer : According to the sliding - filament model of muscle contraction, the molecules that moves to shorten ... B. Collagen C. Myosin D. Creatine phosphate

An action (thin) filament figure is given below . Classify A and D.

Description : An action (thin) filament figure is given below . Classify A and D.

Last Answer : An action (thin) filament figure is given below . Classify A and D. A. Troponin and Tropomyosin. B. ... and F - Actin D. F - Actin and Tropomyosis

According to sliding filament theory of muscle contraction, the filament that move to shorten a muscle are

Description : According to sliding filament theory of muscle contraction, the filament that move to shorten a muscle are

Last Answer : According to sliding filament theory of muscle contraction, the filament that move to shorten a muscle ... B. Actin C. Collagen D. Creatine phosphate

Calculate the number of free electrons passing through the filament of an electric lamp in one hour when the current through the filament is 0.32 A.

Description : Calculate the number of free electrons passing through the filament of an electric lamp in one hour when the current through the filament is 0.32 A.

Last Answer : Calculate the number of free electrons passing through the filament of an electric lamp in one hour when the current through the filament is 0.32 A.

The variation between V-I has shown by graph for heating filament

Description : The variation between V-I has shown by graph for heating filament

Last Answer : The variation between V-I has shown by graph for heating filament A. B. C. D.

What is the difference between staple and filament fibres?

Description : What is the difference between staple and filament fibres?

Last Answer : Need answer

What two properties of the metal tungsten that make it good material for the filament?

Description : What two properties of the metal tungsten that make it good material for the filament?

Last Answer : Magnesium and Titanium.

What is the status of a bulb with a broken filament?

Description : What is the status of a bulb with a broken filament?

Last Answer : With a broken filament, the bulb is dead. It needs to be replaced with a new bulb.

How many wires are normally connected to a double- filament light bulb?

Description : How many wires are normally connected to a double- filament light bulb?

Last Answer : 5

If the filament of the bulb is broken would the circuit be complete?

Description : If the filament of the bulb is broken would the circuit be complete?

Last Answer : If the bulb's filament is broken, the whole circuit becomes open. If the bulb is in a series circuit or is the only bulb, the electricity would no longer flow. If the bulb is in a parallel circuit, along with other bulbs, then only the blown bulb would go out, and the other bulbs would still work.

Why a bulb with a filament gives off light?

Description : Why a bulb with a filament gives off light?

Last Answer : Electricity goes through the filament in the bulb.The filament is made of a material that is not a good conductor and therefore offers "resistance" to the electricity going through it.The "resistance" results ... hot, then very hot.The filament gets so hot that it starts to glow, giving off light.

The filament of an electric bulb is made of which metal

Description : The filament of an electric bulb is made of which metal

Last Answer : Tungsten