In an RLC parallel circuit, the impedance at resonance is

by

1 Answer

Answer :

In an RLC parallel circuit, the impedance at resonance is Maximum.

by

Related questions

In parallel RLC resonance circuit at resonance the current will be

Description : In parallel RLC resonance circuit at resonance the current will be  (1) Minimum (2) Maximum (3) Zero (4) Infinite

Last Answer : In parallel RLC resonance circuit at resonance the current will be Minimum 

Consider the following statements with respect to a high Q, series RLC circuit under resonance

Description : Consider the following statements with respect to a high Q, series RLC circuit under resonance 1. The voltage across R is equal to the applied voltage 2. The voltage across L and C are zero 3 ... in magnitude 4. The voltage accross L and C are maximum Which of these statements are correct?

Last Answer : Consider the following statements with respect to a high Q, series RLC circuit under resonance 1. The voltage across R is equal to the applied voltage 2. The voltage across L and C are zero 3. ... The voltage accross L and C are maximum Which of these statements are correct? 1,3 and 4

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

What does it mean when an RLC circuit is at resonance?

Last Answer : When the total impendance equals  supply frequency.

In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Description : In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Last Answer : Nonresonant (circuit is either above or below resonance)

Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Description : Compare series and parallel resonance on the basis of (i) Resonating frequency (ii) Impedance (iii) Current (iv) Magnification

Last Answer : S. No . Parameter Series Circuit Parallel Circuit 1 Resonating frequency 2 Impedance Minimum, Z = R Maximum, Z = L/CR 3 Current Maximum, I ... , I = V/(L/CR)  4 Magnification Voltage magnification takes place Current magnification takes place

Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is

Description : Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is minimum B) During parallel resonance current is magnified C) During series resonance current at resonance is maximum D) During series as well as parallel resonance, the power factor is unity

Last Answer : Which of the following statements is incorrect? A) During parallel resonance impedance at resonance is minimum B) During parallel resonance current is magnified C) During series resonance current at resonance is maximum D) During series as well as parallel resonance, the power factor is unity

A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C...

Description : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is:  (1) 25 (2) 50 (3) 100 (4) 200

Last Answer : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: 200.

In what ways can RLC be solved in parallel circuit ?

Description : In what ways can RLC be solved in parallel circuit ?

Last Answer : Answer : vector or phaser method , admixture method , vector algebra method , equivalent impedance method.

A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Description : The combined effect of inductive reactance, capacitive reactance, and resistance in an AC series circuit is known as _____________. A. reactance B. total reactance C. impedance D. resonance

Last Answer : Answer: C

What type of impedance does the tank circuit have above resonance?

Description : What type of impedance does the tank circuit have above resonance?

Last Answer : Inductive.

In an R-C-L series circuit, during resonance, the impedance will be _____.

Last Answer : In an R-C-L series circuit, during resonance, the impedance will be minimum.

What is the resonance frequency equation for parallel circuit?

Description : What is the resonance frequency equation for parallel circuit?

Last Answer : In parallel circuit when XC = XL, the circuit is called the parallel resonance circuit. That is 2πfL = 1/2πfC. In term (FR) = 1/2π√1/LC – R2/L2 cycles per second. If ‘R’ is negligible, then (FR) = 1/2π√LC cycles per second.

The series and parallel resonance on L-C circuit differs in that?

Description : The series and parallel resonance on L-C circuit differs in that?

Last Answer : The series and parallel resonance on L-C circuit differs in that series resistance needs a low-resistance source for sharp rise in current.

A parallel AC. circuit in resonance will?

Description : A parallel AC. circuit in resonance will?

Last Answer : A parallel AC. circuit in resonance will have a high impedance.

The purpose of a parallel circuit resonance is to magnify?

Description : The purpose of a parallel circuit resonance is to magnify?

Last Answer : The purpose of a parallel circuit resonance is to magnify voltage.

The power factor at resonance in R-L- C parallel circuit is?

Description : The power factor at resonance in R-L- C parallel circuit is?

Last Answer : since a rlc circuit at resonance behaves like a pure resistive circuit, i.e there is no phase difference between current and voltage, hence the power factor is unity.

The magnitude of the open-circuit and short circuit input impedance of a transmission line are 100 ohm and...

Description : The magnitude of the open-circuit and short circuit input impedance of a transmission line are 100 ohm and 25 ohm respectively. The characteristic impedance of line is:  (1) 25 ohm (2) 50 ohm (3) 75 ohm (4) 100 ohm

Last Answer : The magnitude of the open-circuit and short circuit input impedance of a transmission line are 100 ohm and 25 ohm respectively. The characteristic impedance of line is 25 ohm.

Why is the current behind the voltage in the RLC circuit ?

Description : Why is the current behind the voltage in the RLC circuit ?

Last Answer : Inductance prevents any change in current or flux. So the current stays behind the voltage.

Why is the RLC series circuit called an acceptor circuit?

Description : Why is the RLC series circuit called an acceptor circuit?

Last Answer : The series RLC circuit exhibits minimum resistance at resonance.This means an input at the resonant frequency will see maximumcurrent in that RLC circuit. Put another way, the RLC circuit issaid to ... the current of an input signal when that signalequals the resonant frequency of the RLC circuit.

In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Description : In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Last Answer : Ans: All of the above

Derive an expression for resonant frequency of series RLC circuit.

Description : Derive an expression for resonant frequency of series RLC circuit.

Last Answer : At resonance frequency in RLC series circuit, we have inductive reactance is equal to capacitive reactance i.e.  Where fr is the resonant frequency in RLC series circuit. 

The loop equation for a series RLC circuit gives

Description : The loop equation for a series RLC circuit gives

Last Answer : The loop equation for a series RLC circuit gives

Define active power and reactive power for RLC series circuit.

Description : Define active power and reactive power for RLC series circuit.

Last Answer : Active Power (P): Active power (P) is given by the product of voltage, current and the cosine of the phase angle between voltage and current.  Unit: watt (W) or kilo-watt (kW) or Mega-watt ... volt-ampere-reactive (VAr), or kilo-volt-ampere-reactive (kVAr) or Mega-voltampere-reactive (MVAr) 

In a series RLC circuit operating below the resonant frequency the current

Description : In a series RLC circuit operating below the resonant frequency the current  (a) I leads Vs (b) I lags Vs (c) I is in Phase with Vs (d) None of these

Last Answer : In a series RLC circuit operating below the resonant frequency the current  I leads Vs 

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

In a series RLC high Q circuit, the current peaks at a frequency

Description : In a series RLC high Q circuit, the current peaks at a frequency  (1) equal to the resonant frequency (2) greater than the resonant frequency (3) less than the resonant frequency (4) equal to half the resonant frequency

Last Answer : In a series RLC high Q circuit, the current peaks at a frequency equal to the resonant frequency

The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : -

Description : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - a) 225 MHz b) 1.06 MHz c) 10 KHz d) 10 MHz

Last Answer : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - 10 KHz

In a series RLC circuit that is operating above the resonant frequency, the current : -

Description : In a series RLC circuit that is operating above the resonant frequency, the current : -  a) lags the applied voltage b) leads the applied voltage c) is in phase with the applied voltage d) is zero

Last Answer : In a series RLC circuit that is operating above the resonant frequency, the current : - lags the applied voltage

A series RLC circuit has a resistance of 50 , inductance of 0.4H and a...

Description : A series RLC circuit has a resistance of 50 , inductance of 0.4H and a capacitor of 10µF. The circuit is connected across a 100V supply. The resonance frequency and the current through the resistance are 

Last Answer : A series RLC circuit has a resistance of 50 , inductance of 0.4H and a capacitor of 10µF. The circuit is connected across a 100V supply. The resonance frequency and the current through the resistance are 500 rad/s and 2A.

An RLC series. circuit remains predominantly inductive

Description : An RLC series. circuit remains predominantly inductive

Last Answer : Above resonance frequency

Which of the electrical properties listed will always be the same for each component in a parallel circuit? A. Impedance B. Current C. Resistance D. Voltage

Description : Which of the electrical properties listed will always be the same for each component in a parallel circuit? A. Impedance B. Current C. Resistance D. Voltage

Last Answer : Answer: D

In a parallel-resonant circuit, what is the relationship between impedance and current?

Description : In a parallel-resonant circuit, what is the relationship between impedance and current?

Last Answer : Maximum impedance, minimum current.

What is the difference between calculating impedance in a series ac circuit and in a parallel ac circuit?

Description : What is the difference between calculating impedance in a series ac circuit and in a parallel ac circuit?

Last Answer : In a series circuit impedance is calculated from the values of resistance and reactance. In a parallel circuit, the values of resistive current and reactive current must be used to calculate total impedance.

When two generators are on the line and are sharing the load equally, they are said to be operating in _____________. A. frequency B. series C. parallel D. resonance

Description : When two generators are on the line and are sharing the load equally, they are said to be operating in _____________. A. frequency B. series C. parallel D. resonance

Last Answer : Answer: C

Define quality factor for parallel resonance and write its mathematical expression.

Description : Define quality factor for parallel resonance and write its mathematical expression.

Last Answer : Quality Factor of Parallel AC Circuit at resonance: The quality factor or Q-factor of parallel circuit is defined as the ratio of the current circulating between two branches of the circuit to the current ... from the source. It is the current magnification in parallel circuit.  Formula: 

The lossless line of characteristics impedance 300 Ohm is terminated in a pure resistance of 200 Ohm.

Description : The lossless line of characteristics impedance 300 Ohm is terminated in a pure resistance of 200 Ohm. The value of the standing wave ratio is  (a) 1.5 (b) 0.67 (c) 1.0 (d) 1.25

Last Answer : The lossless line of characteristics impedance 300 Ohm is terminated in a pure resistance of 200 Ohm. The value of the standing wave ratio is 1.5

A loss less line of characteristic impedance Z0 is terminated in pure reactance of –jZ0 value. VSWR is

Description : A loss less line of characteristic impedance Z0 is terminated in pure reactance of –jZ0 value. VSWR is  (1) 10 (2) 2 (3) 1 (4) Infinity

Last Answer : A loss less line of characteristic impedance Z0 is terminated in pure reactance of –jZ0 value. VSWR is Infinity.

Among the three configuration the highest output impedance is obtained by

Last Answer : Among the three configuration, the highest output impedance is obtained by CB.

Typical loudspeaker impedance rating is

Last Answer : Typical loudspeaker impedance rating is 8 ῼ.

Intrinsic impedance of free space is given as

Last Answer : Intrinsic impedance of free space is given as 377 ῼ.

inductors have a high impedance when?

Description : inductors have a high impedance when?

Last Answer : When you increase the number of turns.

In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table-1",,"Table-2"),(,(A),"If " omegagtome

Description : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table-1",,"Table-2"),(,(A),"If " omegagtome

Last Answer : In L-C-R series circuit suppose `omega_(r)` is resonance frequency, then match the following table, `{:(,,"Table ... are in phase"),(,,,(T),"None"):}`

What is resonance in series circuit?

Description : What is resonance in series circuit?

Last Answer : If in an AC circuit inductive reactance XL and capacitive reactance XC is equal the voltage across both will be equal and are 180° out of phase. So that each will cancel each other and the current ... resonant frequency and the resonant frequency (FR) is equal to (FR) = 1/2π√LC cycles per second.

A tunable RF instrument, which, by means of a sharp dip of an indicating meter, indicates resonance with an external circuit under test

Description : A tunable RF instrument, which, by means of a sharp dip of an indicating meter, indicates resonance with an external circuit under test

Last Answer : dip meter

An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

State condition for resonance in R-L-C series circuit.

Description : State condition for resonance in R-L-C series circuit.

Last Answer : The condition for resonance in R-L-C series circuit. i) Inductive Reactance should be equal to capacitive reactance. That is XL = XC ii) The power factor of the circuit is Cos ɸ = 1 iii)The voltage and ... and given by I =V/R. v)Impedance of the circuit is minimum and given by Z =R.

Draw series R-L-C circuit and describe resonance.

Description : Draw series R-L-C circuit and describe resonance. 

Last Answer : Series R-L-C circuit:  Explanation of Series R-L-C Resonance circuit: A series circuit containing resistance, inductance and capacitance, is said to be resonant when the circuit power ... , and as we are analyzing a series RLC circuit this resonance frequency produces a Series Resonance.