If R, L and C are the parameters of a resistor then the condition for the resistor to be non-inductive is

by

1 Answer

Answer :

If R, L and C are the parameters of a resistor then the condition for the resistor to be non-inductive is L = CR2 .

by

Related questions

The three non -inductive loads of 5 kW, 3 kW and 2 kW are connected in a star network between R, Y and B...

Description : The three non -inductive loads of 5 kW, 3 kW and 2 kW are connected in a star network between R, Y and B phases and neutral. The line voltage is 400 V. The current in the neutral wire is nearly (a) 11 A (b) 14 A (c) 17 A (d) 21 A

Last Answer : The three non -inductive loads of 5 kW, 3 kW and 2 kW are connected in a star network between R, Y and B phases and neutral. The line voltage is 400 V. The current in the neutral wire is nearly 11 A

The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Description : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

Last Answer : The parameters of Transmission line are R = 50 Ω/ km, L= 1mH/km ,C = 0.1µf/km, G = 2µV/km. calculate characteristic impedance.

A conducting bar is slid at a constant velocity v along two conducting rods. The rods ar seprated by a distance l and connected across a resistor R. T

Description : A conducting bar is slid at a constant velocity v along two conducting rods. The rods ar seprated by a distance l and connected across a resistor R. T

Last Answer : A conducting bar is slid at a constant velocity v along two conducting rods. The rods ar ... to determine the direction and nature of the current

A conducting bar is slid at a constant velocity v along two conducting rods. The rods ar seprated by a distance l and connected across a resistor R. T

Description : A conducting bar is slid at a constant velocity v along two conducting rods. The rods ar seprated by a distance l and connected across a resistor R. T

Last Answer : A conducting bar is slid at a constant velocity v along two conducting rods. The rods ar seprated by a distance l ... apparatus? A. v B. l C. R D. B

A conducting bar is slid at a constant velocity v along two conducting rods. The rods ar seprated by a distance l and connected across a resistor R. T

Description : A conducting bar is slid at a constant velocity v along two conducting rods. The rods ar seprated by a distance l and connected across a resistor R. T

Last Answer : A conducting bar is slid at a constant velocity v along two conducting rods. The rods ar seprated by a ... i generated by the apparantus? B. C. D.

Compare third party insurance and comprehensive on following parameters: i. Risk cover ii. Premium iii. Application of vehicle iv. Condition

Description : Compare third party insurance and comprehensive on following parameters: i. Risk cover ii. Premium iii. Application of vehicle iv. Condition

Last Answer : i. Risk cover  In third party insurance only covers damage from a accident only to the other people and their property if you are fault.  In case of comprehensive insurance the damage ... injuries and damage to property does not cover.  In comprehensive insurance personal injuries are covered.

State condition for resonance in R-L-C series circuit.

Description : State condition for resonance in R-L-C series circuit.

Last Answer : The condition for resonance in R-L-C series circuit. i) Inductive Reactance should be equal to capacitive reactance. That is XL = XC ii) The power factor of the circuit is Cos ɸ = 1 iii)The voltage and ... and given by I =V/R. v)Impedance of the circuit is minimum and given by Z =R.

For the process `H_(2)O(l) (1 "bar", 373 K) rarr H_(2)O(g) (1"bar", 373 K)` the correct set of thermodynamic parameters is

Description : For the process `H_(2)O(l) (1 "bar", 373 K) rarr H_(2)O(g) (1"bar", 373 K)` the correct set of thermodynamic parameters is

Last Answer : For the process `H_(2)O(l) (1 "bar", 373 K) rarr H_(2)O(g) (1"bar", 373 K)` the correct set of ... S = 0` D. `Delta G = -ve, Delta S = +ve`

Which plant parameters shown in the illustration would produce an alarm if they exceeded preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. TO RDCN. GR. B. L.O. PRESS. TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG. and L.O. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Description : Which plant parameters shown in the illustration would produce an alarm if they exceeded preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. TO RDCN. GR. B. L.O. PRESS. TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG. and L.O. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Last Answer : Answer: D

Which plant parameters shown in the illustration would produce an alarm if they fell below preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. PRESS. TO RDCN. GR. B. L.O. PRESS TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG and L.O. PRESS. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Description : Which plant parameters shown in the illustration would produce an alarm if they fell below preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. PRESS. TO RDCN. GR. B. L.O. PRESS TO MN. ENG. and PME #3 MN. BRG. C. ... . TO MN. ENG and L.O. PRESS. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Last Answer : Answer: C

(A) Tertiary carbocations are generally formed more easily than primary carbocations. (R) Hyperconjugation as well as inductive effect due to addition

Description : (A) Tertiary carbocations are generally formed more easily than primary carbocations. (R) Hyperconjugation as well as inductive effect due to addition

Last Answer : (A) Tertiary carbocations are generally formed more easily than primary carbocations. (R) Hyperconjugation as ... A) is incorrect but (R) is correct.

(A) Inductive and electromeric effects require polar nature in the molecule. (R) Polar nature in inductive effect is a must but not necessarily in ele

Description : (A) Inductive and electromeric effects require polar nature in the molecule. (R) Polar nature in inductive effect is a must but not necessarily in ele

Last Answer : (A) Inductive and electromeric effects require polar nature in the molecule. (R) Polar nature in inductive ... (A) is incorrect but (R) is correct.

An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure resistor under the same condition strikes a current of 10

Description : An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure resistor under the same condition strikes a current of 10

Last Answer : An ideal choke takes a current of 8A when connectd to an AC source of 100V and 50 Hz. A pure ... resistor and inductor `sqrt(10x)`A. Find value of x

If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Description : If resistance is 20 Q. and inductance is 27 in a R-L series circuit, then time constant of this circuit will be?

Last Answer : 0.1s

Which of the following is NOT a non-linear resistor?

Description : Which of the following is NOT a non-linear resistor? A) Varistor B) Precision resistor C) NTC thermistor D) PTC thermistor 

Last Answer : Which of the following is NOT a non-linear resistor? A) Varistor B) Precision resistor C) NTC thermistor D) PTC thermistor 

35. Which of the following is not a characteristic of the L P model a. Alternative courses of actions b. An objective function of maximization type c. Limited amount of resources d. Non-negativity condition on the value of decision variable

Description : 35. Which of the following is not a characteristic of the L P model a. Alternative courses of actions b. An objective function of maximization type c. Limited amount of resources d. Non-negativity condition on the value of decision variable

Last Answer : b. An objective function of maximization type

2. Non-Negativity condition is an important component of L P model because a. Variables value should remain under the control of the decision-maker b. Value of variables make sense & correspond to real-world problemsc. Variables are interrelated in terms of limited resources d. None of the above

Description : 2. Non-Negativity condition is an important component of L P model because a. Variables value should remain under the control of the decision-maker b. Value of variables make sense & correspond to real-world problems c. Variables are interrelated in terms of limited resources d. None of the above

Last Answer : b. Value of variables make sense & correspond to real-world problems

Which of the following problem arises in D.C. motors which are fed from thyristor bridge circuits ? (a) Increased I R losses (b) Increased core losses (c) Poor commutation (d) Change in motor parameters (e) All of the above

Description : Which of the following problem arises in D.C. motors which are fed from thyristor bridge circuits ? (a) Increased I R losses (b) Increased core losses (c) Poor commutation (d) Change in motor parameters (e) All of the above

Last Answer : (e) All of the above

Qualitative research is often exploratory and has all of the following characteristics except: a. It is typically used when a great deal is already known about the topic of interest b. It relies on the collection of non-numerical data such as words and pictures c. It is used to generate hypotheses and develop theory about phenomena in the world d. It uses the inductive scientific method

Description : Qualitative research is often exploratory and has all of the following characteristics except: a. It is typically used when a great deal is already known about the topic of interest b. It ... hypotheses and develop theory about phenomena in the world d. It uses the inductive scientific method

Last Answer : a. It is typically used when a great deal is already known about the topic of interest

Find the equivealent resistance of the circuit shown in Fig. 4.61 between the points P and Q. Each resistor has a resistance r.

Description : Find the equivealent resistance of the circuit shown in Fig. 4.61 between the points P and Q. Each resistor has a resistance r.

Last Answer : Find the equivealent resistance of the circuit shown in Fig. 4.61 between the points P and Q. Each resistor has a resistance r.

Find the equivalent resistance of the circuit shown in Fig.4.60 between the points A and B. Each resistor has a resistance r.

Description : Find the equivalent resistance of the circuit shown in Fig.4.60 between the points A and B. Each resistor has a resistance r.

Last Answer : Find the equivalent resistance of the circuit shown in Fig.4.60 between the points A and B. Each resistor has a resistance r.

The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4)/(3)Omega`. What are the values of r

Description : The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4)/(3)Omega`. What are the values of r

Last Answer : The equivalent resistance of two resistor connected in series is `6 Omega` and their equivalent resistance is `(4 ... , 2 Omega` D. `6 Omega, 2 Omega`

In the circuit shown here, what is the value of the unknown resistor R so that the total resistance of the circuit between points P and Q is also equa

Description : In the circuit shown here, what is the value of the unknown resistor R so that the total resistance of the circuit between points P and Q is also equa

Last Answer : In the circuit shown here, what is the value of the unknown resistor R so that the total resistance of the ... ` C. `sqrt(69)Omega` D. `10 Omega`

An uncharged capacity ER C=`100muF` with a resistor is connected with AC source as shown in the figure If R= is `50Omega` and switch S is closed at t=

Description : An uncharged capacity ER C=`100muF` with a resistor is connected with AC source as shown in the figure If R= is `50Omega` and switch S is closed at t=

Last Answer : An uncharged capacity ER C=`100muF` with a resistor is connected with AC source as shown in the figure If R ... `(v_(A)-V_9B)` is k volt. Calculate K

A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Description : A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Last Answer : ANSWER: Z -- 5 V/R

If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Description : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Last Answer : If the 12 Ohm resistor draws a current of 1 A as shown in the figure, the value of resistance R is

Briefly explain how the power factor of an inductive circuit can be improved.

Description : Briefly explain how the power factor of an inductive circuit can be improved.

Last Answer : As we know that power factor should be corrected to ensure that the current supplied is cost friendly. Meaning the power factor should be around one but not greater than one(0.8-0.9) in a ... an inductive circuit due to the inductive reactance which oppose the change of current in the ac circuit. 

Explain the working of inductive proximity sensor. State any two applications.

Description : Explain the working of inductive proximity sensor. State any two applications.

Last Answer : Proximity sensors are input devices that detect presence of an object without physical contact. Internal construction of inductive proximity switch is as shown in figure. It consists of a ... Applications: 1) gear teeth sensing 2) RPM measurement 3) Object counting 4) Obstacle detection.

A 200 V, 50 Hz inductive circuit takes a current of 10 A at 30 degree lagging pf, what is the inductive ...

Description : A 200 V, 50 Hz inductive circuit takes a current of 10 A at 30 degree lagging pf, what is the inductive reactance of the circuit?  (A) 17.8 Ω (B) 100 Ω (C) 178 Ω (D) 10 Ω 

Last Answer : D

A single phase 60 Hz generator supplies an inductive load of 4500kW at a power factor of 0.80 lagging ...

Description : A single phase 60 Hz generator supplies an inductive load of 4500kW at a power factor of 0.80 lagging by means of a 20 km long overhead transmission line. The line resistance and inductance are 0.0195 ohm and 0.60 mH ... voltage regulation of the line.  (A) 12.59% (B) 16.34% (C) 32.68% (D) 41.15% 

Last Answer : Answer is C

The average power in a pure inductive circuit is ___________.

Last Answer : The average power in a pure inductive circuit is 0.

In a pure inductive circuit _________.

Last Answer : In a pure inductive circuit The current lags applied voltage by 90 degree.

The rate of rise of current through an inductive coil is maximum?

Description : The rate of rise of current through an inductive coil is maximum?

Last Answer : The rate of rise of current through an inductive coil is maximum at the start of the current flow.

In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will?

Description : In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will?

Last Answer : In a pure inductive circuit if the supply frequency is reduced to 1/2, the current will be doubled.

Pure inductive circuit takes power from the A.C. line when?

Description : Pure inductive circuit takes power from the A.C. line when?

Last Answer : It takes power when voltage decreases and current increases.

In a purely inductive circuit?

Description : In a purely inductive circuit?

Last Answer : In a purely inductive circuit actual power is zero.

In a pure inductive circuit?

Description : In a pure inductive circuit?

Last Answer : Voltage lagging in inductor

Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Description : Power factor of an inductive circuit is usually improved by connecting capacitor to it in?

Last Answer : Power factor of an inductive circuit is usually improved by connecting capacitor to it in parallel.

Time constant of an inductive circuit?

Description : Time constant of an inductive circuit?

Last Answer : Time constant of an inductive circuit increases with increase of inductance and decrease of resistance.

Pure inductive circuit?

Description : Pure inductive circuit?

Last Answer : Pure inductive circuit takes power from the line during some part of the cycle and then returns back to it during other part of the cycle.

Out of the following, in which lesson, a general rule is explained first and then examples are illustrated? Options: A) Deductive lesson B) Inductive lesson C) Cognitive lesson D) Skill lesson

Description : Out of the following, in which lesson, a general rule is explained first and then examples are illustrated? Options: A) Deductive lesson B) Inductive lesson C) Cognitive lesson D) Skill lesson

Last Answer : A) Deductive lesson

A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km

Description : A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km

Last Answer : A transmission line of 200 km has a certain A, B, C and D parameters. If the length is reduced to 60 km A increases, B decreases

For a two -port reciprocal network, the three transmission parameters are A = 4, B = 7 and C = 5. ...

Description : For a two -port reciprocal network, the three transmission parameters are A = 4, B = 7 and C = 5. What is the value of D ?  (a) 9.5 (b) 9.0 (c) 8.5 (d) 8.0

Last Answer : For a two -port reciprocal network, the three transmission parameters are A = 4, B = 7 and C = 5. What is the value of D ?  (a) 9.5 (b) 9.0 (c) 8.5 (d) 8.0

Draw series R-L-C circuit and describe resonance.

Description : Draw series R-L-C circuit and describe resonance. 

Last Answer : Series R-L-C circuit:  Explanation of Series R-L-C Resonance circuit: A series circuit containing resistance, inductance and capacitance, is said to be resonant when the circuit power ... , and as we are analyzing a series RLC circuit this resonance frequency produces a Series Resonance.

Write the working of L-C-R meter with suitable sketch.

Description : Write the working of L-C-R meter with suitable sketch.

Last Answer : LCR meter: A LCR meter (Inductance L, Capacitance C, and Resistance R) test equipment used to measure the inductance, capacitance and, resistance of a component. It works on the principle ... relative change in magnitude of the repetitive variations of the voltage and current known as amplitudes.

In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied

Description : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is (A) 70 V (B) 50 V (C) 60 V (D) 100 V

Last Answer : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is 50 V

A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are

Description : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is

Last Answer : A series R-L-C Circuit has a resonant frequency of 1000 Hz. If the values of R, L and C are doubled, the new resonant frequency is 500 Hz

What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively?

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Total instantaneous power supplied by a 3-phase ac supply to a balanced R-L load is

Description : Total instantaneous power supplied by a 3-phase ac supply to a balanced R-L load is

Last Answer : Total instantaneous power supplied by a 3-phase ac supply to a balanced R-L load is constant

A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series ...

Description : A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series circuit, just after the switch is closed, is equal to (1) Zero (2) V/L (3) V/C (4) V.L/C 

Last Answer : When is a series RLC circuit is over damped