How to Install a New Fuel Tank

1 Answer

Answer :

How to Install a New Fuel Tank
Fuel tanks can wear out over time, developing leaks or even being punctured. What you need to do now is replace the fuel tank. Although a mechanic can do this easily for you, you can perform this easy maintenance technique. You need the right materials and instructions.

What You’ll Need:
New fuel tank
Fuel line
Hose clamps
Floor jack
Hose clamps
Wrench
Sockets
Fire extinguisher
Camera (optional)
Procedure:
Drain the gas from your old tank first. You need a proper receptacle for the fuel you’re draining In some fuel tanks, there is a drain cock that will let you neatly drain all the gas. Locate it at the lowest point of the tank. When you find it, carefully loosen the valve then let the gas drain completely.
For a tank without a drain cock, remove the fuel by taking out one of the fuel lines. There’s a rubber hose which exits the tank and at its lowest point, fully drain the tank. This is either connected to a fuel filter, fuel pump or a hard fuel line, going to the car’s front. Loosen the clamp on the line’s end connecting to the gas tank. Afterwards, pull the hose off, then let the gas run out from the tank and in the container. Drain it completely.
Put the gas in a can, then store it away safely. Later on, you can load this in your new fuel tank.
Remove the fuel lines connected to the tank. In gas tanks, there’s more than one line. Find the fuel supply line that leaves the tank at the lowest point, and which goes to the engine or fuel tank.
Find the large fill tube that comes from the gas fill entry point. There’s also a vent line which allows release of pressure when there’s a change in the tank level.
Take away all the lines that go to the fuel tank. If you want, you can take a photo of the setup even before you take it apart, so you’ll have an easy time putting it back together later.
In some cars there’s a single beam in their rear. In front-wheel drive car types, it’s a suspension beam and on rear wheel drives, it’s an axle with a rear differential. Check your engine and see if the tank can be taken away with the rear suspension in place. If not, you need to have the rear suspension dropped.
Disconnect the bottom fitting on the rear shock absorbers, then pull the rear suspension downwards, away from the shocks that dangle.
Support the drive assembly or rear suspension beam, at the center, using a floor jack. This will let you lower the heavy parts.
If you need to drop the rear suspension to take off the fuel tank, the assembly is now supported with a floor jack. Remove the bolts of the lower shock mount.
Disconnect the rear brake lines, to avoid causing them damage.
Remove the large nuts attaching the drive assembly or rear beam to the car’s frame. Using the jack, lower the assembly to the ground.
You’ll see the fuel tank held in place with a couple of metal straps, securing it. To remove it, loosen the nuts at one end. They’ll drop off on their own. Pull them down, then unhook from the other end.
Install the new fuel tank, reversing the steps to put back the assembly.
Some Tips
Always work in a clean and organized area. Clutter might cause a few accidents.
Keep sources of flame or spark away.
Make sure your area is well-ventilated. A fire extinguisher will be handy in case an accident occurs.
Why put up with an old fuel tank when you can easily replace it with a new one? Just follow these easy steps and you’ll get this in no time. Remember, safety first!

Related questions

Description : How to Set Up a Saltwater Fish Tank

Last Answer : How to Set Up a Saltwater Fish Tank When planning on having an aquarium, keep in mind that in order for your fish to survive, you have to keep the properties of their natural living environment ... aquarium owner. Let your tank be as close to your fish's natural living environment as possible.

Description : How to Build Your Own Fish Tank?

Last Answer : How to Build Your Own Fish Tank? Whether you're a serious hobbyist, or just looking for a creative challenge, building your own fish tank can be an interesting challenge. This fish tank is designed to ... water. Now sit back and enjoy your fish. Watch them swim in your new securely built fish tank.

Description : How to Build a Septic Tank

Last Answer : How to Build a Septic Tank How to Build a Septic Tank As construction costs continue to rise, homeowners who wish to build homes look for ways to save money wherever they can. If there's an opportunity ... not done right the first time you will end up paying quite a hefty sum to get it put right!

Description : How to Build a Fish Tank

Last Answer : How to Build a Fish Tank How to Build a Fish Tank Fish, without a shadow of a doubt, make fine pet. Sure, they are not quite as companionable as a puppy but there are a few ... or different attractive decorations. Be artistic and create a world of magic, the fishes will love their new home.

Description : How to Build a Bait Tank

Last Answer : How to Build a Bait Tank How to Build a Bait Tank A bait tank is a tank that is used when fishing in a boat. This tank is useful for effectual maintenance of bait like minnows and herring. Instructions ... the boat. A top cover is also used for the tank. All this together makes a good bait tank.

Description : How to Change a Fuel Injector

Last Answer : How to Change a Fuel Injector Is your engine flooded with gas and your motor sputtering? It might be because your fuel injector is dirty or plugged up. Although it's not a very common dilemma ... arises, do not neglect this simple maintenance trick. Otherwise, you'll expect plenty of problems soon.

Description : What is Scuba Tank

Last Answer : A scuba tank is also known as a diving cylinder. It houses and transports breathable compressed air as part of a SCUBA (Self-Contained Underwater Breathing Apparatus). Scuba tanks provide gas to the diver ... . It ranges from 1.7 cubic foot to 40 cubic foot depending on the situation and conditions.

Description : Septic Tank Problems

Last Answer : The septic tank is the heart of any septic system. Like the human heart, the human body and the other organs are pointless without it. A septic system simply isn't the same without a septic tank. In ... it. Naturally, septic systems last a long time if cared for properly. Now you know what to do.

Description : Septic Tank Installation

Last Answer : You can always settle for the community septic system set up by private corporations or the local government. It's more convenient that way, as you don't have to do anything but live in your house and ... digging and excavating, and we think it'll take more than just a couple of shovels to do that.

Description : Septic Tank Additives

Last Answer : We all know where waste water ends up-in the septic tank. The water flows down the drain, through a long tunnel leading up to the tank that is the heart of the septic system. What happens in ... also clog your septic tank without your knowing it. So make sure you buy the right product that works.

Description : State the purpose of surge tank and spill way in hydroelectric power station.

Last Answer : Surge tank :- A surge tank is the small reservoir or tank. It is open at the top. It is installed near Vale house of turbine. It avoids water hammer effect when load on turbine reduces. (It ... ; during floods etc. In this way spill way avoids damage of dam due to excess pressure of water.

Description : State the function of following with respect to hydro power plant : I) Storage reservoir II) Surge tank II) Spillways IV) Trash rack

Last Answer : I) Storage reservoir: It is the basic requirement of hydroelectric plant. Its purpose is to store water which may be utilized to run the prime mover to produce electrical power. A reservoir stores during ... of nozzles of impulse turbines. It is made of steel bars and is placed across the intake.

Description : The function of a surge tank is to  (1) produce surge in the pipeline (2) relieve water hammer pressure in the penstock (3) supply water at constant pressure (4) none of above

Last Answer : The function of a surge tank is to relieve water hammer pressure in the penstock

Description : How to Install Wooden Gates

Last Answer : How to Install Wooden Gates A wooden gate can add a great deal of character to your home and yard. Wooden gates look better than metal gates and are often more secure. Here is a quick guide on how to install ... long planks down to match the gate's top and then nail it to the top of the gate's rail.

Description : How to Install Wainscot

Last Answer : How to Install Wainscot Wainscot is a traditional finishing element to any room. It consists of a baseboard, chair rail and a panel board. If you happen to be so inclined, the panel board can be replaced ... with the awl. Place foot rail; attach and sink with 6d nails. Caulk any voids if necessary.

Description : How to Install Training Wheels

Last Answer : How to Install Training Wheels There will come a time when you would have to teach your child to ride a bike without any supporting equipment, but if he or she is still small, you need to ... be interested in reading The Guide to bicycles and as an addition learn how to lubricate your bike chain.

Description : How to Install Tiles

Last Answer : How to Install Tiles Installing the tile is easy. It can make any home better looking than before. It will give you a modern and clean look. Check first the surface where you will install it before you ... the cleaning. Clean it using a wet sponge. It will take about 3-4 days to seal the grout.

Description : How to Install Styrofoam Crown Molding

Last Answer : How to Install Styrofoam Crown Molding Crown moldings add a touch of elegance to any room. Putting in traditional wooden ones however, can be a large financial investment and can also be difficult ... the molding until the glue sets in order to ensure that the alignment remains level and straight.

Description : How to Install Storm Shutters

Last Answer : How to Install Storm Shutters Cyclones, hurricanes, and strong winds can cause serious damage to your property. Windows and doors are usually designed to withstand the strongest and most ... tips, storm shutters can help secure your home and minimize damage from harsh weather conditions.

Description : How to Install Slate Tiles

Last Answer : How to Install Slate Tiles When planning on remodeling your floor, you have to consider the material that you're going to use. If you don't like to have a slippery floor, use slate tiles. Here are ... get this job done. Follow these easy steps and you'll have good looking slate tiles in no time.

Description : How to Install Sheetrock

Last Answer : How to Install Sheetrock What is Sheetrock? Sheetrock is actually a brand name for drywall, a kind of material commonly used in interior walls. Sheetrock is made from gypsum layered with hard, sturdy paper ... . Sand the joints after all the coats have completely dried. Do this with a light hand.

Description : How to Install Satellite Radio

Last Answer : How to Install Satellite Radio If you're often on the road, one great gadget you can have in your car is the satellite radio. It gives more variety, continuous programming without having to look for ... you have a satellite radio. Just follow these steps, and you'll soon have one in your car.

Description : How to Install Replacement Windows

Last Answer : How to Install Replacement Windows First think of the style, material and type of window you want. Consider these before you replace your old one. There is a wide range of replacement windows you can choose ... and seal the seams. This is done on the part where the insert goes next to the frame.

Description : How to Install Pavers

Last Answer : How to Install Pavers Looking for a way to spruce up your boring driveway? If you're tired of seeing the usual asphalt or brick surface, there's one great option you can turn to: install pavers. It ... work, but once you see how lovely your outside space looks, you'll know that it's worth it!

Description : How to Install Judges Paneling

Last Answer : How to Install Judges Paneling If you are looking for a more classic look for a room, judges paneling may be for you. It is often associated with libraries and plush leather chairs. In reality, ... because the floor may not be 100% flat. Nailing a shoe railing in place will cover this space.

Description : How to Install Insulation in Older Residences

Last Answer : How to Install Insulation in Older Residences Today's energy needs are a mounting concern for most homeowners. Making sure that your old home is adequately insulated will not only lower energy ... like sliding doors and entry doors to garages where strip insulation can be stapled in place.

Description : How to Install Gutters

Last Answer : How to Install Gutters Gutters do not simply accessorize your roofing system. They are used primarily to direct rainwater. This is to keep it from accumulating in your basement. Musty and moldy odors ... last step would be to use mounting brackets. This will tightly affix the downspout to the side.

Description : How to Install Granite Tiles

Last Answer : How to Install Granite Tiles If you're looking for a tasteful way to improve your kitchen or bathroom walls, one tactic you can try is installing granite tiles. These are not only eye pleasing and lovely ... your walls. Keep these steps in mind, and you'll get to enjoy beautiful granite walls soon.

Description : How To Install Drywall

Last Answer : How To Install Drywall Even after the walls and ceilings inside your home are fully-erect, there's still one key element you have to install: the drywall. This building material is manufactured ... 're not, better leave it to the expert tapers. An improperly installed drywall can spell disaster.

Description : How to Install Crown Molding

Last Answer : How to Install Crown Molding Crown molding makes the wall meet the ceiling. It is applied with artistic style to give notable touch of class in designing a room. Crown molding installation demands ... small joint gaps, use wood putty. Use your finger on rough-surfaced molding when applying putty.

Description : How to Install Ceramic Tile

Last Answer : How to Install Ceramic Tile Ceramic tiles are glossy and often have pretty patterns, making your bathroom and your kitchen sections look dainty. This popular material is a welcome addition to your home, ... on. All your efforts will be rewarded by the sheer beauty of the tiled wall and flooring.

Description : How to Install Brick Steps

Last Answer : How to Install Brick Steps A stylish brick stairway will really set your patio or entryway apart from the others. Installing a brick stairway is not one of the easier projects for a do-it-yourself, but ... way of disappearing as you work only to return in the form of a stubbed toe or brick splinter.

Description : How to Install Bifold Doors

Last Answer : How to Install Bifold Doors Sliding doors on closets are great, but they can be a problem when you're trying to reach the stuff found in the middle where the doors overlap each other. The ... tired of your usual sliding doors. With these easy steps, you can install one without any difficulties.

Description : How to Install Baseboards

Last Answer : How to Install Baseboards What separates a decent-looking wall from a gorgeous one is a plank of wood elegantly placed at the bottom. This plank is known as the baseboard. Baseboards are used for ... You can purchase extra boards for practice, in case you're not adept at handling wooden workpieces.

Description : How to Install Baseboard on Stairs

Last Answer : How to Install Baseboard on Stairs Your stairs are installed and now you have decided that you want to install a baseboard on your stairs. Here is a how to' guide on baseboard installation that ... have baseboards on their stairs at all, though they can add a nice decorative touch to your home.

Description : How to Install Baseboard Heating

Last Answer : How to Install Baseboard Heating If you have a small apartment or room that you want to heat in an efficient manner, one effective method is by using electric baseboard heating. Installing it yourself might seem ... these steps and you're sure to have a cozy and warm indoor area, all the time.

Description : How to Install an RV Awning

Last Answer : How to Install an RV Awning RVs are great when you want to venture and enjoy the great outdoors, but for you to enjoy it more, you should get an RV awning. This helpful installation gives you a pleasant ... . When you get it right, you can enjoy the comfort of your RV under a nice, cool shade.

Description : How to Install an Ice Maker

Last Answer : How to Install an Ice Maker Most of us like to have our favorite drinks served ice cold. Stop wishing wishing for an ice maker. Hook one up to your refrigerator. Here are some steps you can follow to ... make sure that you've got all the materials with you so you won't have any problems later on.

Description : How to Install an Air Conditioner

Last Answer : How to Install an Air Conditioner If you don't want to have central air conditioning inside your home, one option is to install a wall mounted air conditioning unit instead. While the process is ... a wall-mounted air conditioner will serve you well. Follow these steps and enjoy cool days ahead.

Description : How to Install an Above Ground Pool

Last Answer : How to Install an Above Ground Pool Having an above the ground pool would be a nice addition to your house. It can be a source of fun and recreation. There is even a good variety of above the ground ... for you to clean and balance out the pool's water. This should be done before you swim in it.

Description : How to Install a Water Softener

Last Answer : How to Install a Water Softener Hard water contains magnesium or calcium in it, forming a sticky scum with soap, preventing it from lathering properly, and also causing scale to form inside kettles, ... your new water softener. Just follow these steps, and you'll ahve this unit working just fine.

Description : How to Install a Wall Sconce

Last Answer : How to Install a Wall Sconce Regular wall light fixtures are great, but if you're looking for one that can provide you with a low illumination level, and make the area seem larger than it is, then ... from reading how to replace a light switch and as a bonus learn how to make a landscape lighting.

Description : How to Install a Timer Switch

Last Answer : How to Install a Timer Switch A timer switch is a handy device that automatically turns off a switch after a fixed period of time. This is particularly useful when you have kids at home ... safety precautions when installing switches or anything that might put you in the direct path of electricity.

Description : How to Install a Surround Sound System

Last Answer : How to Install a Surround Sound System The complete multimedia experience is in great part about the perfect execution of sound. While normal stereo speakers are great for watching TV or some movies, ... new surround sound system and enjoy every bit and beat for the best audio experience possible.

Description : How to Install a Steel Door and Frame

Last Answer : How to Install a Steel Door and Frame Installing a steel door and frame for safety is a good project to consider. The door and frame often come as a set, making the process easier. After the ... board width. Nail new wallboard in place so that it stays against the door frame. Tape and plaster.

Description : How to Install a Sprinkler System

Last Answer : How to Install a Sprinkler System A sprinkler system promotes convenience in the normally tedious job of watering your lawn or garden. Upon activation, the sprinklers provide water for the entire ... When everything is up and running, you can finally stop worrying about watering the plants.

Description : How to Install a Sliding Door

Last Answer : How to Install a Sliding Door Patios and back areas of a house look better with sliding doors. Most often used between outdoor and indoor spaces, sliding doors give a lovely appearance to any home. You ... you assemble your own sliding door. Just follow these steps, and this task will be a breeze.

Description : How to Install a Sliding Bolt

Last Answer : How to Install a Sliding Bolt You can install locks in your home that you can open from the outside with a key, but if you want to have a lock that won't be accessible from the outside, you should get a ... install a sliding bolt. It's not a hard chore, but it will be very useful for a long time.

Description : How to Install a Satellite Receiver

Last Answer : How to Install a Satellite Receiver If you love watching television with as many possible channels as you can get, you've probably gotten yourself a satellite receiver and a satellite dish. Here ... the satellite company's introductory prices to determine what kind of programs you're interested in.

Description : How to Install a Peephole

Last Answer : How to Install a Peephole Opening the door immediately after someone knocks or rings the doorbell is something many people are accustomed to doing, without realizing the danger it can bring. If you're ... checking it first. Just follow these steps and keep yourself and your family safe all the time.