Last Answer : MOSFET are voltage controlled devices.
Show More
151 views
3 answers
asked
Sep 23, 2017
by
anonymous

Last Answer : No, BJT is a current controlled device .
Show More
184 views
1 answer
asked
Sep 10, 2017
by
anonymous

Last Answer : No, IGBT is not the current controlled device. IGBT is a voltage controlled device. IGBT have combine qualities of MOSFET and BJT. The high switching speed of MOSFET and low conduction losses of BJT. Also, IGBT which stands for Insulated Gate Bipolar Transistor have high input impedance.
Show More
216 views
1 answer
asked
Sep 13, 2017
by
anonymous

The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of (A) 1.5V (B) 2.5V (C) 3.5V (D) 4.5V
Last Answer : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of 2.5V
Show More
316 views
1 answer
asked
Apr 28, 2018
by
anonymous

Last Answer : Thyristor can only be turned on by small gate pulse but it cannot be turn off by using gate hence thyristor is called semi controlled device.
Show More
1.1k views
1 answer
asked
Sep 10, 2017
by
anonymous

Last Answer : BJT is current controlled device.
Show More
144 views
4 answers
asked
Sep 23, 2017
by
anonymous

Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses.
Last Answer : MOSFET is metal oxide field effect transistor. MOSFET is a voltage controlled device. MOSFET is majority carrier device. MOSFET are of two one is n-channel MOSFET and p-channel MOSFET. Gate, ... . Hence, power MOSFET is operated at high enough gate-source voltage to minimize the conduction losses.
Show More
842 views
1 answer
asked
Dec 7, 2017
by
anonymous

What is meant by pinch off voltage in MOSFET?
Show More
102 views
0 answers
asked
Mar 19, 2018
by
anonymous

Last Answer : No, MOSFET is not the curent controlled device. The current between drain and source which is drain current is controlled by applying a voltage between gate and source hence MOSFET is a voltage controlled device.
Show More
201 views
1 answer
asked
Sep 10, 2017
by
anonymous

The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque (1) Decreases (2) Increases (3) Remains constant (4) None of the above
Last Answer : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque Increases
Show More
237 views
1 answer
asked
May 1, 2018
by
anonymous

A current controlled voltage source is equivalent to : (A) series voltage feed -back amplifier (B) shunt current feed -back amplifier (C) shunt voltage feed -back amplifier (D) series current feed -back amplifier
Last Answer : A current controlled voltage source is equivalent to : shunt voltage feed -back amplifier
Show More
121 views
1 answer
asked
Apr 30, 2018
by
anonymous
.jpg)
In voltage source converter based HVDC transmission system the active power is controlled by changing (A) phase angle of the converter ac input voltage (B) supply frequency of the converter ac input voltage (C) magnitude of the converter ac input voltage (D) DC voltage at the inverter terminals
Last Answer : In voltage source converter based HVDC transmission system the active power is controlled by changing phase angle of the converter ac input voltage
Show More
136 views
1 answer
asked
Apr 28, 2018
by
anonymous

For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is
Last Answer : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is 25 x 25
Show More
2.2k views
1 answer
asked
Apr 27, 2018
by
anonymous

Describe with neat sketch the construction and working principle of MOSFET.
Last Answer : Construction and working principle of MOSFET: A) Depletion type MOSFET: Construction: The N-channel depletion type MOSFET is formed on P-type silicon substrate with two heavily ... accumulation of electrons and hence more current. Thus the MOSFET is a gate voltage controlled device.
Show More
3.6k views
1 answer
asked
Jul 25, 2019
by
anonymous

State the applications of MOSFET
Last Answer : Applications of MOSFET: i) Switching-mode-power-supplies (SMPS) and linear power supplies. ii) Brushless DC motor drives iii) Solid state DC relay iv) Automobile applications v) Stepper motor controller vi) Lighting controls vii) Solenoid drivers viii) Robotics ix) Induction heating
Show More
87 views
1 answer
asked
Jul 25, 2019
by
anonymous

Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown
Last Answer : Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown
Show More
3.2k views
1 answer
asked
Apr 28, 2018
by
anonymous

Explain switching model of MOSFET.
Show More
75 views
0 answers
asked
Mar 10, 2018
by
anonymous

Explain MOSFET gate drive circuit and totem pole configuration.
Last Answer : MOSFET gate drive circuit: The turning on and turning off of MOSFET can be controlled from gate to source voltage signal. If the gate to source voltage of MOSFET exceeds threshold ... this configuration, the two switches (transistors) are used in totem pole arrangement with a comparator.
Show More
349 views
1 answer
asked
Feb 19, 2018
by
anonymous

Explain the formation of parasitic BJT and parasitic diode in Power MOSFET. Can parasitic diode be used in same power electronics applications?
Last Answer : Parasitic Diode: The parasitic diode is in between drain and source. The MOSFET structure itself contains parasitic diode or body drain diode. This parasitic diode allows the reverse flow of current when the ... of MOSFET as a BJT collector. Parasitic BJT operates in the cut-off region.
Show More
2.6k views
1 answer
asked
Feb 6, 2018
by
anonymous

Operating frequency of power MOSFET is higher than that of power BJT. Justify the statement.
Last Answer : Power MOSFET have high turning on and turning off capability high switching speed of MOSFET is due to the high rate of change of drain voltage. The switching losses of power MOSFET ... lower frequency. Hence, operating frequency of power MOSFET is higher than that of power BJT.
Show More
984 views
1 answer
asked
Feb 3, 2018
by
anonymous
.jpg)
Justify the statement. Antiparallel diode is connected across MOSFET.
Last Answer : In MOSFET current is flow from drain to source but when the load is inductive the current may flow in opposite direction. To avoid the opposite flow of current and to protect MOSFET the antiparallel diode is connected across MOSFET.
Show More
161 views
1 answer
asked
Feb 2, 2018
by
anonymous

parallel operation of MOSFET can be done more easily as compared to thyristor. why?
Last Answer : Parallel operation of MOSFET can be done more easily as compared to thyristor because the resistance of MOSFET is increases with increase in temperature. MOSFET have the positive temperature coefficient. In ... the parallel operation of MOSFET can be done more easily as compared to the thyristor.
Show More
300 views
1 answer
asked
Dec 7, 2017
by
anonymous

Explain difference between enhancement MOSFET and depletion type MOSFET.
Last Answer : In enhancement MOSFET channel is not initially exists but in depletion MOSFET channel is already exists. In case of depletion MOSFET if the voltage is applied between drain and source the drain current will flow ... a channel. depletion MOSFET & enhancement MOSFET
Show More
549 views
1 answer
asked
Nov 14, 2017
by
anonymous
.jpg)
Compare BJT, MOSFET and IGBT .
Last Answer : BJT MOSFET IGBT BJT is a current controlled device. MOSFET is a voltage controlled device. IGBT is a voltage controlled device. The input impedance of BJT is low. ... is minority carrier device. MOSFET is majority carrier device. IGBT is minority carrier device.
Show More
449 views
1 answer
asked
Nov 10, 2017
by
anonymous

Explain the series and parallel operation of MOSFET. Which is suitable and why?
Last Answer : Series operation of MOSFET: To increase voltage handling capability MOSFETs are connected in series. When the MOSFETs are connected in series each MOSFET should turn on and turn off ... on and turn off time and transconductance. Each MOSFET should share current equally.
Show More
535 views
1 answer
asked
Sep 15, 2017
by
anonymous

Last Answer : Because it has a higher switching frequency and heat tolerance.
Show More
143 views
1 answer
asked
Sep 15, 2017
by
anonymous

What is depletion type MOSFET?..........
Last Answer : Depletion MOSFET: Depletion MOSFET is a MOSFET in which the channel already exists. If we apply a voltage between drain and source then the drain current will flow even if the gate to source ... in figure. The drain current will be reduced as the gate to source voltage made more negative.
Show More
189 views
1 answer
asked
Sep 15, 2017
by
anonymous

What is enhancement MOSFET?...............
Last Answer : Enhancement MOSFET: There are two types of MOSFET one is enhancement MOSFET and second is depletion MOSFET. In enhancement MOSFET channel is created by applying threshold voltage between gate and source ... mode. The enhancement MOSFET will not conduct if the gate to source voltage is zero.
Show More
175 views
1 answer
asked
Sep 15, 2017
by
anonymous

Last Answer : ON state losses of IGBT is less as compared to MOSFET and BJT.
Show More
142 views
1 answer
asked
Sep 13, 2017
by
anonymous

Last Answer : MOSFET provides better efficiency at high frequency and its high speed switching losses are less hence MOSFET is used for high frequency.
Show More
114 views
1 answer
asked
Sep 10, 2017
by
anonymous

State classification of Phase controlled rectifiers.
Last Answer : Classification of phase controlled rectifiers:
Show More
106 views
1 answer
asked
May 21, 2020
by
anonymous

Single-phase mid-point controlled rectifier with RL load
Last Answer : Single-phase mid-point controlled rectifier with RL load : The circuit configuration of single-phase midpoint controlled rectifier is shown in the figure. During positive half-cycle of ... some part of next positive half-cycle of voltage with reversed polarity can appear across load.
Show More
213 views
1 answer
asked
Oct 13, 2019
by
anonymous

Single-phase Midpoint controlled rectifier with Resistive load
Last Answer : Single-phase Midpoint controlled rectifier with Resistive load: 1) During positive half cycle of AC supply, a is positive with respect to b , this makes T1 forward biased and T2 is reverse ... voltage reverses the polarity and T2 is turned off. The operation is as shown in waveforms.
Show More
619 views
1 answer
asked
Oct 13, 2019
by
anonymous
.jpg)
Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.
Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.
Show More
898 views
1 answer
asked
Jul 25, 2019
by
anonymous

Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.
Last Answer : Single phase fully controlled half wave converter: The circuit diagram of single-phase half-wave controlled rectifier with RL load and without freewheeling diode is shown in Fig. (a). The SCR T is ... , when again pulse is applied, the SCR is turned on & the above cycle is repeated.
Show More
3.0k views
2 answers
asked
Jul 25, 2019
by
anonymous

A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is
Last Answer : Please show the solution for this question
Show More
522 views
2 answers
asked
Apr 29, 2018
by
anonymous

When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is
Last Answer : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is √3/2
Show More
1.4k views
1 answer
asked
Apr 29, 2018
by
anonymous

A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is (A) 4.5 V (B) 6.75 V (C) 9 V (D) 13.5 V
Last Answer : A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is 9 V
Show More
184 views
1 answer
asked
Apr 28, 2018
by
anonymous

The device which allows reverse power flow and withstands highest switch frequency is (A) GTO (B) MOSFET (C) IGBT (D) Inverter grade SCR
Last Answer : The device which allows reverse power flow and withstands highest switch frequency is MOSFET
Show More
89 views
1 answer
asked
Apr 28, 2018
by
anonymous

Last Answer : In BJT there is movement of electrons and holes accros the junctions which is basicaly current flow.
Show More
364 views
2 answers
asked
Sep 10, 2017
by
anonymous

State advantages of MOSFET.
Last Answer : Advantages of MOSFET * MOSFETs provide greater efficiency while operating at lower voltages. * Absence of gate current results in high input impedance. * High switching speed. * They operate at lower ... due to lower resistance of channel. * They are easy to manufacture. * They are portable.
Show More
106 views
1 answer
asked
May 2, 2020
by
anonymous

67 views
0 answers
asked
Aug 12, 2019
by
aku

What parameters are to be considered when choosing a MOSFET?
Show More
55 views
0 answers
asked
Aug 3, 2019
by
anonymous

Compare JFET with MOSFET.
Last Answer : Particulars JFET MOSFET 1) Type Voltage controlled device Voltage controlled device 2) Mode of operation Operates only in depletion mode Operates in depletion and enhancement ... 6) Gate connection Not isolated from substrate Isolated by SiO2 layer from substrate
Show More
108 views
1 answer
asked
Sep 5, 2018
by
anonymous

Describe the operation of N channel enhancement type MOSFET with diagram.
Last Answer : As its name indicates, this MOSFET operates only in the enhancement mode and has no depletion mode. It operates with large positive gate voltage only. It does not conduct when the ... of charge carriers attracted to the positive gate. Thus drain current is controlled by the gate potential.
Show More
644 views
1 answer
asked
Sep 5, 2018
by
anonymous

A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of 600 C/W. If the ambient temperature is 300o C ... the device will be A) 1.52 W B) 1.72 W C) 1.92W D) 2.00 W
Last Answer : A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of ... 300o C, then the maximum allowable power dissipation in the device will be 2.00 W
Show More
149 views
1 answer
asked
Jun 18, 2018
by
anonymous
.jpg)
When does the Body bias effect occur in an n-channel MOSFET? A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) When the Drain voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage
Last Answer : When does the Body bias effect occur in an n-channel MOSFET? A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) ... voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage
Show More
109 views
1 answer
asked
Jun 18, 2018
by
anonymous

A MOSFET has how many terminals?
Last Answer : A MOSFET having three terminals 1st one is Gate (insulated), 2nd one is Source and 3rd one is Drain.
Show More
217 views
3 answers
asked
Mar 19, 2018
by
anonymous
.jpg)
What is the transconductance of a MOSFET?
Show More
60 views
0 answers
asked
Mar 19, 2018
by
anonymous

What is channel length modulation in MOSFET?
Last Answer : Shortening of lenght of the inverted channel region with increase in drain bias for large drain biases due to which current increases with drain bias and output resistance decreases is called channel length modulation in MOSFET.
Show More
313 views
2 answers
asked
Mar 19, 2018
by
anonymous
