How to Measure For a Garage Door
At some point you will probably need a new garage door. Before getting the new door, however, you will need to take some measurements. This article explains how to measure for a new garage door.
How to get around it
First, measure the garage opening. Measure the width of the opening as well as the height of the opening and write down these dimensions. Your door will need to match these measurements.
Next, you will need to measure the side room. You must allow for at least three and three quarters of an inch on each side of the door. This is where you will install a vertical track for the door’s extension springs. There will also be torsion springs that are standard. The EZ-Set Torsion Spring System is the most popular of the available spring systems. If you want to have an extension system, you will need to allow five and a half inches for the springs.
Now measure the headroom in your garage. This is the amount of space that is between the top of the garage door opening and the garage’s ceiling. You will need ten inches of space between the top of the garage door opening and the ceiling for the extension springs of the EZ-Set system. If you use the standard torsion springs, you will need an additional twelve inches of room between the garage door opening and the ceiling. There is a low track option that might be available if you are short on space between the opening and ceiling. If you are going to use an electric garage door system, it is possible that you might need even more space.
The last step is to measure the back room of your garage. The back room is that distance between the garage door opening and the back wall. At least eighteen inches of door height is required, but if you are using an electric garage door system, it is possible that you will need more than that.
Once you have purchased the garage door, it is possible to install the door yourself.
First, remove the old garage door that is already installed. Then, attach the appropriate hardware to the correct sections of the door. Once the hardware has been attached correctly, you can put the sections of the garage door into the garage door opening. Your next step will be to install the track on the walls of the garage and then the rollers will need to be inserted into the track. Finally you will want to attach the springs to the garage door system and connect the cables. Your garage door will come with a complete set of detailed instructions. Make sure you read those instructions and follow them exactly. They generally include pictures or drawings to guide you through step-by-step installation.
Now that you know how to measure for a new garage door you needn’t worry if the garage door you buy will fit into the opening.