2 Answers

Answer :

1 op-amp are required to implement this equation Vo = V1.

Answer :

1

Related questions

Description : An Op-amp as a voltage follower has a voltage gain of

Last Answer : An Op-amp as a voltage follower has a voltage gain of Unity

Description : The input impedance of an op-amp is • High • Low • Medium • None of the above

Last Answer : The input impedance of an op-amp is High

Description : An OP-AMP can be classified as  1.Linear amplifier 2.Low - Rin amplifier 3.Positive - feedback amplifier 4.RC - coupled amplifier 

Last Answer : An OP-AMP can be classified as Low - Rin amplifier

Description : In op-amp operation, Common Mode Rejection Ratio (CMRR)

Last Answer : In op-amp operation, Common Mode Rejection Ratio (CMRR) is desired to be high

Last Answer : If ground is applied to the (+) terminal of an inverting op-amp, the (–) terminal will Be virtual ground.

Last Answer : A non inverting closed loop op amp circuit generally has a gain factor Greater than one.

Description : Equation which measures alternating voltage is A. Vsin ω B. sin t C. Vo sinωt D. V=IR

Last Answer : Vo sinωt

Description : The three devices which make up the circuit shown in the illustration are ____________. EL-0087 A. flip-flops B. exclusive 'OR' gates C. summing op amps D. function generators

Last Answer : Answer: A

Description : How frequency to voltage converted on OP-AMPS.

Last Answer : A Frequency to voltage converter produces an output voltage, whose amplitude is a function of frequency of the input signal. The input signal may be a sinewave, a square wave or a pulse train. The F/V converter is essentially an FM detector or discriminator.

Description : Mention some of the non – linear applications of op-amps

Last Answer : Rectifier, peak detector, clipper, clamper, sample and hold circuit, log amplifier, anti –log amplifier, multiplier are some of the non – linear op-amp circuits. 

Description : Mention some of the linear applications of op – amps.

Last Answer : Adder, subtractor, voltage –to- current converter, current –to- voltage converters, instrumentation amplifier, analog computation ,power amplifier, etc are some of the linear opamp circuits.

Description : What is the need for frequency compensation in practical op-amps?

Last Answer : Frequency compensation is needed when large bandwidth and lower closed loop gain is desired. Compensating networks are used to control the phase shift and hence to improve the stability.

Description : In practical op-amps, what is the effect of high frequency on its performance?

Last Answer : The open-loop gain of op-amp decreases at higher frequencies due to the presence of parasitic capacitance. The closed-loop gain increases at higher frequencies and leads to instability.

Description : An OP-AMPs can amplify _______ (a) D.C (b) A.C (c) both A.C & D.C (d) none of above

Last Answer : b) A.C

Description : Draw the circuit diagram for Instrumentation amplifier using three OP-AMPs. State its advantages and applications.

Last Answer : Application: 1. In Data acquisition from low output transducers such as strain gauges, Thermocouples, Wheatstone bridge measurements e.t.c 2. In Medical instrumentation, Navigation, Radar ... video data acquisition and imaging 5. High frequency signal amplification in cable RF systems 

Last Answer : Op amp is operational amplifier. Operational amplifier are use in ADC, zero crossing detector ,DAC, filters, Voltage regulators, Current regulators, etc.

Description : According to equation of continuity, (A) w1a1 = w2a2 (B) w1v1 = w2v2 (C) a1v1 = a2v2 (D) a1/v1 = a2/v2

Last Answer : Answer: Option C

Description : What is the equation for the work done by a constant temperature system?  A. W = mRTln(V2-V1)  B. W = mR( T2-T1 ) ln( V2/V1)  C. W = mRTln (V2/V1)  D. W = RT ln (V2/V1) Formula : W=∫ pdV lim1,2 ∫ = mRT / V

Last Answer : W = mRTln (V2/V1)

Description : A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Last Answer : e. 8

Description : In the circuit shown in the figure, the capacitor C is charged to a potential Vo. The heat generated in the circuit when the switch S is closed, is

Last Answer : In the circuit shown in the figure, the capacitor C is charged to a potential Vo. The heat generated in the circuit when ... )^(2)` D. `8 CV _(0)^(2)`

Description : In the reaction `VO+Fe_(2)O_(3) rarr FeO+V_(2)O_(5)`, the eq.wt. of `V_(2)O_(5)` is equal to its

Last Answer : In the reaction `VO+Fe_(2)O_(3) rarr FeO+V_(2)O_(5)`, the eq.wt. of `V_(2)O_(5)` is equal to its A. ... wt. B. Mol.wt./8 C. Mol.wt./6 D. None of these

Description : The volume (V) of a mass of gas varies directly as its absolute temperature (T) and inversely as the pressure (P) applied to it. The gas occupies a vo

Last Answer : The volume (V) of a mass of gas varies directly as its absolute temperature (T) and inversely as ... and pressure are 200 ml and 250 Pa respectively?

Description : In this passage from Compulsory Voting AnIn Compulsory Voting An Idea Whose Time Has Come what reason do opponents of compulsory vo Idea Whose Time Has Come what claim is being made by the author?

Last Answer : U.S. citizens already have compulsory obligations to their country

Description : Amount of d.c voltage as compare to Vo is A. 50% B. 60% C. 70% D. 80%

Last Answer : 70%

Description : The volumetric strain is: a) V/Vo b) Vo/V c) V/t d) None

Last Answer : a) V/Vo

Description : Describe how Op-Amp is used as adder using circuit diagram and output voltage equation.

Last Answer : Summing Amplifier Circuit In this simple summing amplifier circuit, the output voltage, ( Vout ) now becomes proportional to the sum of the input voltages, V1, V2, V3, etc. Then we can ... to the non-inverting input of the op-amp, it will produce the positive sum of the input voltages.

Description : Number of power supplies required to get output of op-amp is A. two B. four C. six D. three

Last Answer : two

Description : The minimum number of transistors required to implement a two input AND gate is a. 2 b. 4 c. 6 d. 8

Last Answer : c. 6

Description : How many dimples are their on a titleist pro v1 golf ball?

Last Answer : currently has a 352 dimple pattern

Description : Q No: 251 In a sludge digestion tank if the moisture content of sludge V1 litres is reduced from p1 % to p2 % the volume V2 is A. [(100 + P1)/(100 – P2)] V1 B. [(100 – P1)/(100 + P2)] V1 C. [(100 – P1)/(100 – P2)] V1 D. [(100 + P2)/(100 – P1)] V1

Last Answer : ANS: C

Description : The following describes means to create a OEM V1.x (very old!!!) repository on WindowsNT:

Last Answer : Create a tablespace that would hold the repository data. A size between 200- 250 MB would be ideal. Let us call it Dummy_Space. . Create an Oracle user who would own this repository. Assign ... would trigger the creation of the repository. From now on, Enterprise manager is ready to accept jobs.

Description : What are V1 and V2? How they are connected? What is the harm in opening F/M vault door during reactor operation? 

Last Answer : The reactor building is divided into two areas. They are V1 and V2. V1 - Dry volume area. V2 - Wet volume area. V1 area includes F/M vault, boiler room, and entire dome area. ... directly goes to F/M maintenance area, which is a V2 area. Thus pressurizing the entire building. 

Description : Area(s) in the visual cortex involved in colour vision include: a. V1 b. V2 c. V3 d. V8

Last Answer : V8

Description : For a laminar flow of fluid in a circular tube, 'h1 ' is the convective heat transfer co-efficient at velocity 'V1 '. If the velocity is reduced by half and assuming the fluid properties are constant, the new convective heat transfer co-efficient is (A) 1.26 h1 (B) 0.794 h1 (C) 0.574 h1 (D) 1.741 h1

Last Answer : (B) 0.794 h1

Description : In a dry packed bed, the pressure drop will be changed by increasing the flow rate as (A) V1.8 (B) V-0.8 (C) V (D) V-1

Last Answer : (A) V1.8

Description : essure drop (Δp) for a fluid flowing in turbulent flow through a pipe is a function of velocity (V) as (A) V1.8 (B) V-0.2 (C) V2.7 (D) V

Last Answer : (D) V

Description : An ideal gas is taken around the cycle ABCA as shown in P-V diagram below: The work done by the gas during the cycle is equal to (A) 12 P1V1 (B) 6 P1 V1 (C) 3 P1V1 (D) P1 V1

Last Answer : (C) 3 P1V1

Description : The compressibility factor of a gas is given by (where, V1 = actual volume of the gas V2 = gas volume predicted by ideal gas law) (A) V1/V2 (B) V2/V1 (C) V1- V2 (D) V1.V2

Last Answer : (A) V1/V2

Description : In case of a reversible process (following pvn = constant), work obtained for trebling the volume (v1 = 1 m3 and v23 m3) is maximum, when the value of 'n' is (A) 0 (B) 1 (C) y = 1.44 (D) 1.66

Last Answer : (A) 0

Description : The expression for entropy change given by, ΔS = nR ln (V2/V1) + nCvln (T2/T1) is valid for (A) Reversible isothermal volume change (B) Heating of a substance (C) Cooling of a substance (D) Simultaneous heating and expansion of an ideal gas

Last Answer : (D) Simultaneous heating and expansion of an ideal gas

Description : A certain gas, with cp = 0.529Btu/ lb. °Rand R = 96.2ft.lb/lb. °R, expands from 5 cu ft and 80°F to 15 cu ft while the pressure remains constant at 15.5psia. Compute for T2.  a.1520°R  b. 1620°R  c. 1720°R  d. 1820°R formula: T2= T1V2/V1

Last Answer : 1620°R

Description : A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2.  a. 625 fpm  b. 567 fpm  c. 356 fpm  d. None of the above

Last Answer : 625 fpm

Description : Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps  a. 800,000lb/hr;625ft/s  b. 900,000lb/hr;625 ft/s  c. 888,000lb/hr;269 ft/s  d. 700,000lb/hr;269 ft/s m = A1V!/V1

Last Answer : 900,000 lb/hr;625 ft/s

Description : A certain gas with cp = 0.529Btu/lb°R and R = 96.2ft/lbºR expands from 5 ft and 80ºF to 15 ft while the pressure remains constant at 15.5 psia.  a. T2=1.620ºR, ∫H = 122.83 Btu  b. T2 = 2°R, ∫H = 122.83 Btu  c. ... , ∫H = 122.83 Btu  d. T2 = 1°R, ∫H = 122.83 Btu T2= V2(t2)/V1 and ∫H = mcp (T2-T1)

Last Answer : T2=1.620ºR, ∫H = 122.83 Btu

Description : A certain gas, with cp = 0.529Btu/lb.°R and R = 96.2 ft.lb/lb.°R, expands from 5 cu ft and 80°F to 15 cu ft while the pressure remains constant at 15.5 psia. Compute for T2. (Formula: T2= T1V2/V1)  a. 460°R  b. 270°R  c. 1620 °R  d. None of the above

Last Answer : 1620 °R

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

Description : Helium ( R= 0.4698 BTU/lbm-˚R ) is compressed isothermally from 14.7 psia and 68 ˚F. The compression ratio is 1:4. Calculate the work done by the gas.  A. –1454 BTU/lbm  B. -364 BTU/lbm  C.-187BTU/lbm  D.46.7 BTU/lbm Formula: W = RT ln (V2/V1)

Last Answer : -364 BTU/lbm

Description : Twenty grams of oxygen gas are compressed at a constant temperature of 30 ˚C to 5%of their original volume. What work is done on the system.  A.824 cal  B.924 cal  C.944 cal  D.1124 cal Formula: W = -mRTln (V2/V1) Where R = (1.98 cal/gmole·K) (32 g/gmole)

Last Answer : 1124 cal

Description : Which of the following is the mathematical representation of the Charles’s law?  A. V1/V2= P2/P1  B. V1/T1=V2/T2  C. V1/T2=V2/T1  D. V1/V2=√P2/√P1

Last Answer : V1/T1=V2/T2