How many ampere fuses are used for ironing machine ?

How many ampere fuses are used for ironing machine ?
by

1 Answer

Answer :

15 amp fuse is used for ironing machine.
by

Related questions

How many ampere fuses are used for electric bulbs and fans ?

Description : How many ampere fuses are used for electric bulbs and fans ?

Last Answer : 5 amp fuses are used for electric bulbs and fans.

Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to remove fuse from the circuit. C. Replace blown fuse with one of equal voltage and ampere capacity. D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Description : Which of the following precautions should be taken when a blown fuse, rated at 10 amperes, is replaced? A. Short out the fuse before removing it from the circuit. B. Use needle-nose pliers to ... D. Fuses of 10 ampere rating and less are virtually harmless when energized and may be handled freely.

Last Answer : Answer: C

I need some ironing tips.

Description : I need some ironing tips.

Last Answer : What are you ironing? Shirts? Trousers?

Any ideas how to get the creases out of a new curtain (without ironing it)?

Description : Any ideas how to get the creases out of a new curtain (without ironing it)?

Last Answer : My first thought was to hang them and then steam them.

Do you have any helpful hints for flat ironing the back of your own hair?

Description : Do you have any helpful hints for flat ironing the back of your own hair?

Last Answer : You just kinda have to contort your arms lol. And of course, practice makes perfect.

Why/when did the practice of girls ironing their hair, end?

Description : Why/when did the practice of girls ironing their hair, end?

Last Answer : It didn’t end… Still very common, very easy to spot, and very hot!

Which energy is converted into which energy while ironing clothes ?

Description : Which energy is converted into which energy while ironing clothes ?

Last Answer : Electric energy is converted into heat energy when ironing clothes.

What is electric ironing ?

Description : What is electric ironing ?

Last Answer : The electric device used to clean the cloth by removing the folds of the cloth is called electric ironing.

Electrical Ironing, On the heater No His Use To do Is it

Description : electric Ironing, On the heater No His Use To do Is it

Last Answer : Electric Ironing, On the heater Nichrome His Use To do Is.

What is function of ironing board?

Description : What is function of ironing board?

Last Answer : The usual ironing board (still used today) is a long, narrow, padded board on folding legs that allowed the board to be raised or lowered. Once raised (usually to waist height), clothes can be laid ... up on the fire.Nowadays, with electrical steam irons, etc, ironing clothes is less of a chore.

Did sarah boone work with close friends or family members when she invented the ironing board?

Description : Did sarah boone work with close friends or family members when she invented the ironing board?

Last Answer : No she didn't

How To Make An Ironing Board

Description : How To Make An Ironing Board

Last Answer : Tired of looking like a sock puppet at work? You make it a point to go to work and to your meetings on time. During the course of the day, you usually forget to fix yourself properly, especially ... value. How many people can say that they iron their clothes atop their own blood, sweat and tears?

What is 1 ampere ?

Description : What is 1 ampere ?

Last Answer : Answer : The amount of electric current flowing in each of the two parallel straight conductors of infinite length and insignificant cross section at a distance of one meter in vacuum or air vacuum produces 2 × 10 ^ - 7 Newton force per meter length in each other , is called 1 ampere .

What is 1 ampere ?

Description : What is 1 ampere ?

Last Answer : : 1 ampere: The amount of electric current generated when a 1C charge flows through 1s through any cross section of a conductor through zero is called 1A

What is Ampere ?

Description : What is Ampere ?

Last Answer : When 1 Coulomb charge flows in a circuit with 1 ohm resistance , it is called 1 ampere or ampere. References: Secondary Physics.

Unit of resistance is – (1) volt² x ampere (2) volt/ampere (3) ampere/volt (4) volt x ampere

Description : Unit of resistance is – (1) volt² x ampere (2) volt/ampere (3) ampere/volt (4) volt x ampere

Last Answer : (2) volt/ampere Explanation: An ohm (0) is the SI derived unit of electrical resistance. By definition, a conductor has an electrical resistance of one ohm when a constant potential difference of one volt applied ... ampere (WA) is the SI derived unit, which is equal to ohm by definition 0 = V/A.

The unit of electrical power is – (1) Bolt (2) Watt (3) Kilowatt hour (4) Ampere

Description : The unit of electrical power is – (1) Bolt (2) Watt (3) Kilowatt hour (4) Ampere

Last Answer : (2) Watt Explanation: Electric power is the rate at which electric energy is transferred by an electric circuit. The SI unit of power is the watt, one joule per second. Watt is named after the Scottish engineer James Watt who invented the Newcomen Steam Engine.

The S.I. unit of electric charge is – (1) ampere (2) coulomb (3) e.s.u (4) Kelvin

Description : The S.I. unit of electric charge is – (1) ampere (2) coulomb (3) e.s.u (4) Kelvin

Last Answer : (2) coulomb Explanation: The SI unit of quantity of electric charge is the coulomb, which is equivalent to about 6.242x10^18 e (e is the charge of a proton). Hence, the charge of ... of charge that has passed through the cross section of an electrical conductor canying one ampere within one second.

Ten Coulombs of charge flowing through a wire per second is equal to: w) 100 Amperes x) 10 Ampere y) 1 Amperes z) 0.1 Amperes

Description : Ten Coulombs of charge flowing through a wire per second is equal to: w) 100 Amperes x) 10 Ampere y) 1 Amperes z) 0.1 Amperes

Last Answer : ANSWER: X -- 10 AMPERES

A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Description : A 20 ohm resistor and a 60 ohm resistor are connected in parallel to a voltage source. If the current in the 60 ohm resistor is one ampere, the current in the 20 ohm resistor will be: w) 1/3 ampere x) 2/3 ampere y) 1 ampere z) 3 amperes

Last Answer : ANSWER: Z -- 3 AMPERES

Unit of resistance is : (1) volt2× ampere (2) volt/ampere (3) ampere/volt (4) volt × ampere

Description : Unit of resistance is : (1) volt2× ampere (2) volt/ampere (3) ampere/volt (4) volt × ampere

Last Answer :  volt/ampere

The S.I. unit of electric charge is : (1) ampere (2) coulomb (3) e.s.u (4) kelvin

Description : The S.I. unit of electric charge is : (1) ampere (2) coulomb (3) e.s.u (4) kelvin

Last Answer : coulomb

The unit of electrical power is (1) Bolt (2) Watt (3) Kilowatt hour (4) Ampere

Description : The unit of electrical power is (1) Bolt (2) Watt (3) Kilowatt hour (4) Ampere

Last Answer : Bolt

Do all red-haired women really have short fuses?

Description : Do all red-haired women really have short fuses?

Last Answer : answer:One of my very favourite childhood friends is a redhead and she is an extremely friendly, sociable, approachable, and easygoing person. I don't remember her ever losing her temper on anyone. If she has a ... them. Even I have wished I was born with red hair at at least one point in my life.

The king dies and two men, the true heir and an impostor, both claim to be his long-lost son. Both fit the description of the rightful heir: about the right age, height, coloring and general appearance. Finally, one of the elders proposes a test to identify the true heir. One man agrees to the test while the other flatly re-fuses. The one who agreed is immediately sent on his way, and the one who re-fused is correctly identified as the rightful heir. Can you figure out why? -Riddles

Description : The king dies and two men, the true heir and an impostor, both claim to be his long-lost son. Both fit the description of the rightful heir: about the right age, height, coloring and general ... the one who re-fused is correctly identified as the rightful heir. Can you figure out why? -Riddles

Last Answer : The test was a blood test. The elder remembered that the true prince was a hemophiliac.

Name the areas which were known as 'electrical fuses' of vietnam ? -SST 10th

Description : Name the areas which were known as 'electrical fuses' of vietnam ? -SST 10th

Last Answer : Ans: Ngu an and Ha Tien. They were electrical fuses of Vietnam because they were the first to be adversely affected by any uprisal or protest against the French. hope u find it useful, plz do not hesitate if any doubts . -aasiya

What were ‘electrical fuses’ of Vietnam? -SST 10th

Description : What were ‘electrical fuses’ of Vietnam? -SST 10th

Last Answer : The Great Depression of the 1930s had a profound impact on Vietnam. The prices of rubber and rice fell, leading to rising rural debts, unemployment and rural uprisings, such as in the ... blow. The French put these uprisings down with great severity, even used planes to bomb demonstrators.

Why were Nghe An and Ha Tinh provinces called the electrical fuses of Vietnam ? -SST 10th

Description : Why were Nghe An and Ha Tinh provinces called the electrical fuses of Vietnam ? -SST 10th

Last Answer : The prices of rubber and rice fell, leading to rising rural debts, unemployment and rural uprisings in the provinces of Nghe An and Ha Tinh. Since the provinces of Nghe An and Ha Tinh got ... whenever the colonial system came under pressure, these regions were the first to rise up in rebellion. .

In exocytosis, the membrane package fuses with?

Description : In exocytosis, the membrane package fuses with?

Last Answer : The cell membrane fuses with the membrane package inexocytosis.

How many types of fuses and what are they ?

Description : How many types of fuses and what are they ?

Last Answer : : Three types of fuses according to the structure: 1. Re-wearable 2. Cartridge 3. Two types of fuses according to HRC voltage: 1. Low-voltage 2. High-voltage

Failure of fuses.

Description : When I turn on the dishwasher in the cottage, it fills the pump, the computer runs and the heater heats the water, so the fuses blow out. You just can't have a few e-mails running. things at the same time. What can you do? It bothers me.

Last Answer : Call an electrician and increase the circuit breaker power. I don't know what it's professionally called. But I have experience with it. It wasn't here but it will be the same everywhere. I just ... . energy and tell them the same thing you told us here. He will definitely explain and advise you.

Assertion : The nucleus of sperm fuses with the nucleus of ovum , before the formation of ootid . Reason : Diploid nuclear status of organism is essen

Description : Assertion : The nucleus of sperm fuses with the nucleus of ovum , before the formation of ootid . Reason : Diploid nuclear status of organism is essen

Last Answer : Assertion : The nucleus of sperm fuses with the nucleus of ovum , before the formation of ootid . ... . D. If both Assertion & Reason are False.

Where is the heater Fuses for grand caravan?

Description : Where is the heater Fuses for grand caravan?

Last Answer : Need answer

What in exocytosis the membrane package fuses with?

Description : What in exocytosis the membrane package fuses with?

Last Answer : The cell membrane fuses with the membrane package inexocytosis.

does this have internal fuses?

Description : does this have internal fuses?

Last Answer : Yes, all this microwave's components are installed inside the casing.

How long would the Suns initial supply of hydrogen last in both seconds and yrs as it fuses 600 bil. k ea. second total H avail. in its lifetime is 1.8x10 to 2nd pwr?

Description : How long would the Suns initial supply of hydrogen last in both seconds and yrs as it fuses 600 bil. k ea. second total H avail. in its lifetime is 1.8x10 to 2nd pwr?

Last Answer : You are supposed to divide the total amount of hydrogen, by the consumption per second. That will give you the time in seconds. You can then convert that to years, by dividing by the number of seconds in a year.

Which of these are alternatives to fuses?

Description : Which of these are alternatives to fuses?

Last Answer : circuit breakers

Coast Guard Regulations (46 CFR) require that each alternating current generator arranged for parallel operation shall be provided with _____________. A. more than one means of excitation B. individual circuit fuses C. a high back-pressure trip D. a reverse-power trip

Description : Coast Guard Regulations (46 CFR) require that each alternating current generator arranged for parallel operation shall be provided with _____________. A. more than one means of excitation B. individual circuit fuses C. a high back-pressure trip D. a reverse-power trip

Last Answer : Answer: D

When changing fuses, you should always _____________. A. wear rubber boots B. use a fuse puller C. stand on a rubber mat D. wear safety glasses

Description : When changing fuses, you should always _____________. A. wear rubber boots B. use a fuse puller C. stand on a rubber mat D. wear safety glasses

Last Answer : Answer: B

If a voltage tester is being used to check for defective fuses in the circuit, shown in the illustration, which of the readings will indicate that fuse #2 is open? EL-0062 A. C-B full voltage B. A-D full voltage C. A-D no voltage D. C-B no voltage

Description : If a voltage tester is being used to check for defective fuses in the circuit, shown in the illustration, which of the readings will indicate that fuse #2 is open? EL-0062 A. C-B full voltage B. A-D full voltage C. A-D no voltage D. C-B no voltage

Last Answer : Answer: C

If the motor shown in the illustration will not start when 'Q' is depressed, which of the listed components should be checked FIRST? EL-0017 A. Fuses 'F-1' and 'F-2'. B. Operating coil 'C'. C. Contacts 'H-1', 'H-2', and 'H-3'. D. Contact 'H-4'.

Description : If the motor shown in the illustration will not start when 'Q' is depressed, which of the listed components should be checked FIRST? EL-0017 A. Fuses 'F-1' and 'F-2'. B. Operating coil 'C'. C. Contacts 'H-1', 'H-2', and 'H-3'. D. Contact 'H-4'.

Last Answer : Answer: A

When testing for blown fuses in a three-phase supply circuit to a motor, you should first ___________________. A. apply the megger across the tops of the line fuses B. apply an ammeter diagonally across the top of the first line fuse and the bottom of the third line fuse C. apply the voltage tester across the bottoms of the line fuses D. ensure the circuit is de-energized, and then use a continuity tester

Description : When testing for blown fuses in a three-phase supply circuit to a motor, you should first ___________________. A. apply the megger across the tops of the line fuses B. apply an ammeter diagonally across ... of the line fuses D. ensure the circuit is de-energized, and then use a continuity tester

Last Answer : Answer: D

In addition to short circuits and sustained overloads, fuses are likely to blow due to _____________. A. loose fuse clips B. low ambient temperatures C. low contact resistance D. all of the above

Description : In addition to short circuits and sustained overloads, fuses are likely to blow due to _____________. A. loose fuse clips B. low ambient temperatures C. low contact resistance D. all of the above

Last Answer : Answer: A

Fuses are usually rated in _____________. A. watts B. amps only C. volts only D. amps and volts

Description : Fuses are usually rated in _____________. A. watts B. amps only C. volts only D. amps and volts

Last Answer : Answer: D

To check the three line fuses of a three-phase system consisting of a three-phase motor, you must _____________. A. place the starter in the 'stop' position B. make sure the motor is operating at full load to guard against a false reading C. place the leads across the 'hot' ends of the fuses D. place the leads across the bottom ends of the fuses

Description : To check the three line fuses of a three-phase system consisting of a three-phase motor, you must _____________. A. place the starter in the 'stop' position B. make sure the motor is operating at full ... leads across the 'hot' ends of the fuses D. place the leads across the bottom ends of the fuses

Last Answer : Answer: A

If a circuit breaker that utilizes built-in, current limiting fuses (CLF's) cannot be closed, the problem may be traced to __________. A. a blown CLF plunger holding the trip bar in the open position B. a missing CLF C. a misaligned limiter housing assembly D. all of the above

Description : If a circuit breaker that utilizes built-in, current limiting fuses (CLF's) cannot be closed, the problem may be traced to __________. A. a blown CLF plunger holding the trip bar in the open position B. a missing CLF C. a misaligned limiter housing assembly D. all of the above

Last Answer : Answer: D

When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust and debris from the card and burnish the sliding connections C. make sure all connections are tight including wire wrappings and push-on types D. substitute a new or repaired spare card and check the operation of the circuit

Description : When troubleshooting a console circuit card suspected of being faulty, the last step would be to _______________. A. check the fuses and voltage levels of all power supplies in the console B. clean dust ... -on types D. substitute a new or repaired spare card and check the operation of the circuit

Last Answer : Answer: D

When changing fuses and the spring clips are found to have lost their grip, they should be replaced or _____________. A. tightened firmly with insulated pliers B. clip clamps should be used C. wired closed with uninsulated, varnished copper wire D. carefully bent back to their original shapes

Description : When changing fuses and the spring clips are found to have lost their grip, they should be replaced or _____________. A. tightened firmly with insulated pliers B. clip clamps should be used C. wired closed with uninsulated, varnished copper wire D. carefully bent back to their original shapes

Last Answer : Answer: B

When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Description : When replacing fuses, always make sure _______________. A. to stand on a rubber mat and use rubber gloves B. to use insulated pliers or screwdriver C. the fuse clips are straight, tight, and in good contact D. to increase the fuse rating 10% to guard against 'nuisance blowing'

Last Answer : Answer: C

You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. Testing an energized circuit presents a hazard to the testing personnel. B. A faulty fuse could go undetected with the motor energized. C. Reversed polarity of the circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Description : You are using a mechanical voltage tester to check the fuses in a three-phase circuit supplying an electric motor. For which of the following reasons must the motor be stopped during the test? A. ... circuit would be indicated by the voltage tester with the circuit energized. D. All of the above.

Last Answer : Answer: B