How to Measure Optical Distortion

1 Answer

Answer :

How to Measure Optical Distortion
Optical Distortion is defined as a defect in an optical system. In this defect, the magnification of lines causes lines that are typically straight and sitting at an angular distance from a central point, to look curved. Optical distortion can be overcome by getting rid of the interfaces between the air and the glass. These interfaces allow light to refract and this, in turn, causes the optical distortion.

Here is the way to measure optical distortion.
First, you will need to get a grid that has close lines and put that grid onto a surface that is level. You can make one of these yourself using a pen and paper. The spaces of the grid shouldn’t be any bigger than one sixteenth of an inch apart.

Next, place a stain-free glass container over the grid. A good container to use is a Petri dish or any other kind of quality laboratory glassware.

Once the glass is on the grid, use a manufacturer’s index to find the index of refraction.

Your next step is to pick a refraction liquid that has a refraction index a little bit higher than the specimen itself.

Put the specimen into the glass container that you’ve chosen. The axis of the specimen should intersect the lines of the grid at a forty five degree angle (or very close to it). Pour the refraction liquid that you chose into the glass container, but only deep enough to fully cover the specimen. You shouldn’t be able to discern the specimen and the lines of the grid should only be a little bit distorted by the specimen. Shake the container or use a sharp object to enter the enclosure to get rid of all of the air that might have been trapped in the specimen.

Now you will want to choose a refraction liquid that has an index a little bit lower than that of the specimen. Add this new liquid to the glass container slowly and stir it without stopping while looking through the specimen to see if the grid lines still look distorted. Once the grid lines stop looking distorted, take the container off the grid.

Optical Distortion is another way of saying Optical Illusion. It is what causes straight lines to look curved or for things that are far away to appear to move more slowly than images that are close to you .It is possible to measure optical distortion if you have access to a scientific lab and laboratory materials. You need to understand refraction liquid indexes and how to use specimens in laboratory experiments. Measuring optical distortion doesn’t sound like a complicated process, but it does require a little bit of scientific know-how. Measuring optical distortion can be handy for figuring out how to measure optical illusions and also how the illusion is affecting the way you see a specimen.

Related questions

Description : working of distortion factor meter with block diagram

Last Answer : Working : Initially the switch S is kept at position 1.The attenuator gets excluded and the bridge T network is adjusted for full suppression of fundamental frequency and hence we get ... is obtained on the meter.Thus the total rms distortion is indicated by the reading of attenuator. 

Description : The second harmonic distortion is defined as the A) Ratio of amplitude of second harmonic component in the output to that of the fundamental frequency B) Harmonic distortion due to only second harmonic component C) Sum of distortion of first and second harmonic components in the output 

Last Answer : The second harmonic distortion is defined as the Ratio of amplitude of second harmonic component in the output to that of the fundamental frequency

Description : The effect of negative feedback on distortion and bandwidth is A) Both distortion and bandwidth get decreased B) Both distortion and bandwidth get increased C) Distortion is reduced and bandwidth is increased D) Distortion is increased and bandwidth is decreased 

Last Answer : The effect of negative feedback on distortion and bandwidth is Distortion is reduced and bandwidth is increased

Description : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is  (1) 141 (2) 92.3 (3) 9.23 (4) 1.41

Last Answer : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is 9.23

Description : Transformer coupling introduces which type of distortion?

Last Answer : Transformer coupling introduces Cross over distortion.

Description : Draw neat labeled diagram of optical pyrometer.

Last Answer :  optical pyrometer

Description : Give two applications of each : 1) Eddy current sensor 2) Optical sensor.

Last Answer : Eddy current sensor : 1. Detection of non-magnetic but conductive materials. 2. Displacement sensing 3. Position sensing Optical sensor : 1. Position Detection 2. Velocity Detection 3. Acceleration Detection 4. Direction Detection

Description : How to Measure a Strain Gauge

Last Answer : How to Measure a Strain Gauge There are several ways to measure strain. The most common is to use a strain gauge. In laymen's terms, a strain gauge is a device whose electrical ... who supply all the necessary strain gauges and materials from connection tags, to binding adhesives and training.

Description : How to Read a Tape Measure

Last Answer : How to Read a Tape Measure Introduction Reading a tape measure is fairly simple. At some point, you may need to learn this method. Everyone is presented with the need for this device at one time or ... hand. Take extra care and check the measurement 2 or 3 times to be sure that they are correct.

Description : How to Measure Temperature

Last Answer : How to Measure Temperature Whether you're measuring body temperature or dealing with high-temperature substances in laboratories, you need a very reliable way to measure heat. Thermometers and temperature ... or from an object. With these steps, you can measure temperature quickly and accurately.

Description : How to Measure For Replacement Windows

Last Answer : How to Measure For Replacement Windows You could have any number of reasons for wanting to replace your windows. Windows that are older are often far less energy efficient than the newer vinyl ... probably even give you a rebate for choosing energy efficient windows to replace your old windows.

Description : How to Measure For a Garage Door

Last Answer : How to Measure For a Garage Door At some point you will probably need a new garage door. Before getting the new door, however, you will need to take some measurements. This article explains how to measure ... a new garage door you needn't worry if the garage door you buy will fit into the opening.

Description : How to Measure Tire Sizes

Last Answer : How to Measure Tire Sizes Buying a new set of tires is just like buying shoes: you have to make sure that your tires fit perfectly on the wheel. Tires that are too small or too big for your ... , you can buy a set of tires designed and custom-fit to make your driving experience safe and secure.

Description : People who wear prescription glasses: do your glasses have anti-reflective coating and do you think it's worth the extra cost?

Last Answer : I would go for it and here is why: there may come a time when your contact lenses are lost, broken or stolen. it would be nice to know that you had your glasses as a backup and with the special coating ... have this problem, but at least it would be comforting to know its there ........just in case.

Description : When should I be wearing my glasses?

Last Answer : Wear them when you need to see more clearly…if thats all the time then wear them all the time. I’ve worn glasses since third grade and for a while, every year my eyes got a little bit worse but this last year they actually improved a bit. So who knows.

Description : Draw venture meter and write steps to measure flow rate.

Last Answer : Venturi meter consists of three sections that is converging section, throat section and diverging section. The flow is introduced to the meter through the inlet with diameter D' . The inclined angle ... to 15o . Flow rate is proportional to the square root of the differential pressure.

Description : Explain the term reactive power. Why it is sometimes essential to measure reactive power?

Last Answer : Reactive power: The reactive power (Q) is defined as the product of voltage(V), current (I) and sine of angle between voltage(V) and current( I) Therefore Reactive power Q = V I ... power so that corrective measures can be taken accordingly to maintain systems power factor near to the unity.

Description : List any four measure knobs on front panel on CRO.

Last Answer : Knobs on front panel of CRO: 1. Power ON- OFF 2. Intensity control 3. Focus control 4. Astigmatism control 5. Volt/Div control 6. Vertical position control 7. Invert 8. Horizontal position control 9. Synchronization. 10. Channel selection.

Description : ‘PMMC instrument is not suitable to measure AC quantity’. State the reason.

Last Answer : The direction of force exerted on moving coil depends on the direction of current flowing through moving coil. If the direction of magnetic field is kept constant, it produces unidirectional torque if the current is ... on the coil in one cycle to zero. Hence the meter cannot read A.C. quantities.

Description : Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Last Answer : Following are the methods used to measure resistances:-  (i) Low resistance: 1.Voltmeter-Ammeter Method 2. Kelvin's Double bridge Method  (ii) Medium resistance: 1.Voltmeter-Ammeter Method 2. ... of Charge Method  (iv) Earth resistance : 1. Fall of Potential Method 2. Earth tester

Description : A _________ is used to measure the stator % winding temperature of the generator.  (A) Thermocouple (B) Pyrometer (C) Resistance thermometer (D) Thermometer

Last Answer : A Resistance thermometer is used to measure the stator % winding temperature of the generator. 

Description : A Pyrheliometer is an instrument to measure :  (A) temperature of solar photovoltaic cell  (B) intensity of direct solar radiation at normal incidence  (C) intensity of indirect solar radiation  (D) efficiency of a solar photovoltaic cell

Last Answer : A Pyrheliometer is an instrument to measure : intensity of direct solar radiation at normal incidence 

Description : Piezoelectric Transducer is used to measure  (1) displacement (2) resistance (3) current (4) temperature

Last Answer : Piezoelectric Transducer is used to measure displacement 

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

Description : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Last Answer : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Last Answer : To measure a resistance with the help of a potentiometer it is not necessary to standardise the potentiometer.

Last Answer : It is required to measure the true open circuit e.m.f. of a battery. The best device is D.C. potentiometer.

Last Answer : Integrating instruments are those which measure the total quantity of electricity delivered in a particular time.

Description : An open-circuit test on a transformer is conducted primarily to measure?

Last Answer : The open-circuit test in a transformer is used to measure

Description : What is the unit of measure for voltage?

Last Answer : Voltage measured in volts.

Description : What type of meter is used to measure current?

Last Answer : Ammeter

Description : What equipment is used to measure voltage?

Last Answer : Voltmeter is used to measure voltage.

Description : How do you measure power factor?

Last Answer : P= 1.83*V*I*COS@ where P is power           V is voltage            I is current           COS @ is P.F COS@= P/(1.83*V*I)  in other way cos @ = true power/apparent power

Last Answer : Yes it can...

Last Answer : Voltmeter is used to measure voltage in a circuit.Ohmmeter is used to measure the resistance of a component in a circuit.

Description : How many quarts are in a gallon?

Last Answer : 4?

Description : Which type of optical fiber (multimode or single mode) tends to have lower loss and produces less signal distortion?

Last Answer : Single mode fiber.

Description : Performance measure for Lossless Compression is __________: A. Distortion B. Fidelity C. Quality D. Rate

Last Answer : D. Rate

Description : Popular measures of distortion is a. Squared error measure b. Absolute difference c. Noise d. Nats

Last Answer : a. Squared error measure

Description : The instrument which can be used to measure optical activity, i.e., specific rotation:

Last Answer : The instrument which can be used to measure optical activity, i.e., specific rotation: A. Refractometer B. Photometer C. Voltmeter D. Polarimeter

Description : The measure of optical density of the medium is?

Last Answer : Refractive index

Description : What is the best method for bending aluminum square tubing while keeping a tight radius and minimum distortion?

Last Answer : Buy a pipe bender from a hardware store. Then fill the pipe with water and freeze it, this will stop it form compressing.

Description : Steves reality distortion field?

Last Answer : It's really very strange. When around Steve you seem to just want to say yes to everything even if you feel very strong about your opinion. Many employees have developed something called Stockholm Syndrome ... Fall in love with your capturer but yet people still say he can be the meanest boss.

Description : What is consonant distortion ?

Last Answer : Sometimes a consonant is changed in a word and a new consonant is used. Such a change is called consonant distortion.

Description : How is the ratio of stress and distortion always constant ?

Last Answer : According to Robert Hooke's formula , the stress within the elastic limit is proportional to the deformation. That is , stress ∞ distortion or , stress = distortion constant or , stress / ... Therefore , the ratio of stress to distortion is always constant within the elastic range.

Description : What is the ratio of stress to distortion called ?

Last Answer : The ratio of stress to distortion is called elastic coefficient.

Description : Proportional to the distortion of the stress within the elastic limit. Whose formula is this?

Last Answer : Proportion of stress distortion within the elastic limit. This is Robert Hooke's formula.

Description : What is length distortion ?

Last Answer : When the length of an object changes with the action of an external ball, it is called length distortion. Length distortion is measured by the amount of change in the unit length of an object.

Description : What is wave distortion ?

Last Answer : If two or more waves continue to move in the same direction, their superposition will sometimes increase the intensity too much or sometimes decrease the intensity or become absolutely zero. This phenomenon is called wave distortion.

Description : What is perversion ? What is distortion ?

Last Answer : : A change in the shape of an object by force is called distortion.