How many watts is equal to 1 joule ?

1 Answer

Answer :

1 joule = 746 watts.

Related questions

Description : How many watts equals one unit ?

Last Answer : 1000 watts = 1 unit.

Description : How many watts is an energy bulb ?

Last Answer : : There are different watt energy bulbs such as: - 12W 15W 23W 25W 26W 30W 32W .

Description : How many watts equals 1 horsepower ?

Last Answer : One horsepower equals 646 watts.

Description : How many ohms is equal to 1 international ohm ?

Last Answer : 1 international ohm = 1.000495 ohm.

Description : What is equal to 1 international volt ?

Last Answer : 1 international volt = 1.00033 volts

Description : What is equal to 1 MW ?

Last Answer : 1 MW = 10000 watts.

Description : How many joules is equal to 1 kilowatt hour ?

Last Answer : 1 kilowatt = 1000 joules.

Description : How many joules is equal to one calorie ?

Last Answer : 1 calorie = 4.2 joules.

Description : What is equal to 1 watt hour ?

Last Answer : 1 watt hour = 0.001 kilowatt hour

Description : One joule is equal to a.105 ergs b.108 ergs c.104 ergs d.107 ergs e.106 ergs

Last Answer : d. 107 ergs

Description : How many calories is equal to one joule ?

Last Answer : answer:

Description : How many kilocalories is equal to one kilo joule ?

Last Answer : One kilo joule is equal to 0.24 kilocalories.

Description : How many calories is equal to one joule ?

Last Answer : One joule is equal to 0.24 calories.

Description : In BTU system, one BTU is equal to: A. 10.55 Joule B. 1.055 Joule C. 105.5 Joule D. 10.55 Joule

Last Answer : ANSWER: D

Description : In BTU system, one BTU is equal to: A. 10.55 Joule B. 1.055 Joule C. 105.5 Joule D. 10.55 Joule

Last Answer : ANSWER: D

Description : One Kilowatt hour is equal to— (1) 3.6 Mega Joule (2) 3.8 Mega Joule (3) 3.2 Mega Joule (4) 4.0 Mega Joule

Last Answer : (1) 3.6 Mega Joule Explanation: The energy 1 kilowatt-hour (kWh) is 3600000 joules or 3.6 mega joule. In physics, energy is an indirectly observed quantity that is often understood as ... overly simplified definition, as the laws of thermodynamics demonstrate that not all energy can perform work.

Description : In BTU system, one BTU is equal to-----? A. 2055 Joule B. 1155 Joule C. 2155 Joule D. 1055 Joule (Answer)

Last Answer : D. 1055 Joule (Answer)

Description : One Joule is equal to-----? A. 105 ergs B. 103 ergs C. 107 ergs (Answer) D. 1011 ergs

Last Answer : C. 107 ergs (Answer)

Description : The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Last Answer : Answer: B

Description : What is the DeBroglie wavelength of a 1,200 kilogram corvette traveling at a rate of 25 meters per second? Planck's constant is equal to 6.62 x 10-34 Joule-seconds. w) 5.3 x 10-32 meters x) 5.9 x 10-34 meters y) 2.1 x 10-38 meters z) 1.6 x 10-40 meters

Last Answer : ANSWER: Y -- 2.1 x 10-38 METERS

Description : One Kilowatt hour is equal to— (1) 3.6 Mega Joule (2) 3.8 Mega Joule (3) 3.2 Mega Joule (4) 4.0 Mega Joule

Last Answer : 3.6 Mega Joule

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

Description : What does earth continuity mean ?

Last Answer : The conduction wire that connects the earthing lead to the metal cover of electrical furniture, appliances, or wiring is called the earth continuity wire.

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

Description : What should be the size of the pipe electrode ?

Last Answer : The size of the pipe electrode should be 36 mm diameter 2 to 2.75 m long galvanized iron or steel pipe.

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

Description : What are the essential elements for earthing ?

Last Answer : They are _ a) earthen continuity b) earthing lead c) earthy electrode

Description : What is the best earthing method ?

Last Answer : Pipe earthing method is best. This is because it is less expensive and when the soil dries out in the dry season , regular earthing can be done by pouring water through the pipes.

Description : What is Neutral Plan ?

Last Answer : A plane at infinite distance , where the value of electric field intensity and potential V is zero , is called Neautral Plan .