How many types of biasing ?

How many types of biasing ?
by

1 Answer

Answer :

: There are two types of biasing: 1) forward biasing 2) reverse biasing.
by

Related questions

What is Biasing ?

Description : What is Biasing ?

Last Answer : : Biasing is the external DC supply that is given to activate a transistor.

What are the types of biasing?

Description : What are the types of biasing?

Last Answer : Biasing is classified into 2 types.The 2 types are 1) Forward biasing 2) Reverse biasing

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

How many types of earthing and what are they ?

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

How many types of line support and what are they ?

Description : How many types of line support and what are they ?

Last Answer : Four types of line support. Namely- (a) wooden pole , ( b) steel pole , ( c) concrete pole , ( d) lattice steel pole

How many types of system loss in the context of Bangladesh ?

Description : How many types of system loss in the context of Bangladesh ?

Last Answer : There are two types of system loss. Namely- (a) technical loss , ( b) unskilled loss

How many types of transmission line ?

Description : How many types of transmission line ?

Last Answer : 3 types of transmission line. Namely- 1) Short transmission line , 2) Medium transmission line , 3) Long transmission line.

How many types of transformers according to the structure of the core ?

Description : How many types of transformers according to the structure of the core ?

Last Answer : There are three types of transformers according to the structure of the core , namely- (a) core type (b) shell type (c) spiral core type.

How many types of electrical network ?

Description : How many types of electrical network ?

Last Answer : Six types , viz. (a) Active network (b) Passive network (c) Linear network (d) Non-linear network (e) Uniletral network (f) Bi-lateral network.

How many types of AC load and what ?

Description : How many types of AC load and what ?

Last Answer : There are three types of AC load , namely , 1) Resistive load , 2) Inductive load , 3) Capacitive load.

How many types of power factor ?

Description : How many types of power factor ?

Last Answer : Three types , namely , 1) lagging power factor , 2) leading power factor , 3) unity power

How many types of power in AC circuit ?

Description : How many types of power in AC circuit ?

Last Answer : Three types of power in AC circuit. Namely , 1) actual power , 2) reactive power , 3) apparent power.

What are the types of electric current ?

Description : What are the types of electric current ?

Last Answer : There are two types of electric current , for example , ( a) direct current . And (b) alternating current .

Write the types of modulation and demodulation ?

Description : Write the types of modulation and demodulation ?

Last Answer : There are three main types of modulation. Namely: (a) Amplitude modulation: The modulation in which the amplitude of the carrier signal changes according to the modulating frequency is called ... the carrier signal changes according to the modulating frequency is called phase modulation.

What are the names of different types of logic ?

Description : What are the names of different types of logic ?

Last Answer : High / Low, True / False, On / Off 0/1

How many types of Hub ?

Description : How many types of Hub ?

Last Answer : Three types- (1) Passive hub (2) Active hub ( 3) Intelligent hub

How many types of capacitors and what are they ?

Description : How many types of capacitors and what are they ?

Last Answer : There are three types of capacitors. For example: 1. Fixed capacitor. 2. Adjustable capacitor. 3. Variable capacitor.

What is a cell ? What is a cell , how many types and what are they ?

Description : What is a cell ? What is a cell , how many types and what are they ?

Last Answer : A cell is a device that can convert chemical energy into electrical energy. There are two types of cells: 1. The main cell. 2. Secondary cell.

How many types and what are the multiprocessors ?

Description : How many types and what are the multiprocessors ?

Last Answer : There is no type of multiprocessor or processor. There are different types of processors from Intel company but there is no specific type of processor.

What are the types of refrigerators ?

Description : What are the types of refrigerators ?

Last Answer : There are two main types of refrigerators. Namely- refrigerator and freezer.

How many types of hammers and what are they ?

Description : How many types of hammers and what are they ?

Last Answer : 2 types of hammer. 1 small hammer. 2 big hammers. In the language of masons, hammer is a big hammer.

How many types of fuses and what are they ?

Description : How many types of fuses and what are they ?

Last Answer : : Three types of fuses according to the structure: 1. Re-wearable 2. Cartridge 3. Two types of fuses according to HRC voltage: 1. Low-voltage 2. High-voltage

How many types of artificial magnets ?

Description : How many types of artificial magnets ?

Last Answer : Artificial magnets are magnets that are made in the laboratory using different magnets that are suitable for human work. There are two types of artificial magnets. Namely- 1. Permanent magnet and II. Temporary magnet.

How many types of ammeters ?

Description : How many types of ammeters ?

Last Answer : There are two types of ammeters. Namely digital ammeter , analog ammeter.

How many types of cross arm ?

Description : How many types of cross arm ?

Last Answer : Four types of cross arm. Namely: 1. Simple 2. Triangular 3. V-shaped 4. Spiral or jigsaw

How many types of sockets and what are they ?

Description : How many types of sockets and what are they ?

Last Answer : There are three types of sockets. * Two pin socket * Three pin socket * Five pin socket.

How many types of communication ?

Description : How many types of communication ?

Last Answer : 2 types of communication. It is multi-faceted and versatile.

How could I have asked this question without biasing the answers?

Description : How could I have asked this question without biasing the answers?

Last Answer : There are closed (yes/no) questions, open questions and leading questions. Closed and leading questions are safe because you can control and predict the reactions and outcomes. Open questions are risky ... to run that risk. Unfortunately that means you didn't get the honest reactions you wanted.

In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes more efficient at lower capacitance. C. the arrangement allows the coupling of the signal while it isolates the biasing of each stage. D. good frequency response.

Description : In the illustrated circuit, one advantage of the capacitor coupling over direct coupling is ____________. EL-0048 A. as the frequency decreased the capacitive reactance (Xc) increases B. the amplifier becomes ... of the signal while it isolates the biasing of each stage. D. good frequency response.

Last Answer : Answer: C

RC time constant characteristics, as shown in the illustration, are important in _____________. EL-0086 A. bridge rectifiers for alternator excitation B. timing and pulse shaping circuits C. transistor power amplifier biasing D. motor controller overload protection

Description : RC time constant characteristics, as shown in the illustration, are important in _____________. EL-0086 A. bridge rectifiers for alternator excitation B. timing and pulse shaping circuits C. transistor power amplifier biasing D. motor controller overload protection

Last Answer : Answer: B

What is biasing?

Description : What is biasing?

Last Answer : To use the transistor in any application it is necessary to provide sufficient voltage and current to operate the transistor. This is called biasing.

What are the requirements for biasing circuits?

Description : What are the requirements for biasing circuits?

Last Answer : · The q point must be taken at the Centre of the active region of the output characteristics. · Stabilize the collector current against the temperature variations. · Make the q point independent of the transistor parameters. · When the transistor is replaced, it must be of same type.

What are the methods of transistor biasing?

Description : What are the methods of transistor biasing?

Last Answer : 1. fixed bias 2.collector to base bias 3. self bias or voltage divider bias 4. emitter bias

Write about the biasing of a transistor.

Description : Write about the biasing of a transistor.

Last Answer : Emitter base junction is forward biased while collector base junction is reverse biased.

When is a p-n junction said to be forward biased or what is meant by forward biasing of p-n junction? How does it affect resistance?

Description : When is a p-n junction said to be forward biased or what is meant by forward biasing of p-n junction? How does it affect resistance?

Last Answer : When the positive terminal of a cell is connected to p-side and negative terminal to the n-side of a p-n junction then it is said to be forward biased. It offers low resistance.

What is Biasing?

Description : What is Biasing?

Last Answer : Ans- Biasing is process of applying potential across any electronic equipment in order to make it operate as we require.

Which biasing method iWhich biasing method is the most unstable?

Description : Which biasing method is the most unstable?

Last Answer : Base current bias or fixed bias.

Besides eliminating the emitter-base battery, what other advantages can different biasing methods offer?

Description : Besides eliminating the emitter-base battery, what other advantages can different biasing methods offer?

Last Answer : Compensation for slight variations in transistor characteristics and changes in transistor conduction because of temperature variations.

rid-leak biasing in effect rectifies the input ac signal. What feature

Description : rid-leak biasing in effect rectifies the input ac signal. What feature

Last Answer : Unequal charge and discharge paths of the coupling capacitor Cc.

In a circuit using grid-leak biasing, the coupling capacitor (Cc) chargcharge path?

Description : In a circuit using grid-leak biasing, the coupling capacitor (Cc) chargcharge path?

Last Answer : rkg, the cathode to grid resistance.

When a circuit uses cathode biasing, the input signal can cause varia

Description : When a circuit uses cathode biasing, the input signal can cause varia

Last Answer : Through the use of a bypass capacitor

State the need of biasing and describe the concept of DC load line

Description : State the need of biasing and describe the concept of DC load line

Last Answer : Need of Biasing for Transistor: The transistor should be biased in the active region if it is to be used for amplification and in saturation and cut off if it is used as a switch. 2. The Q ... The position of operating point on the load line is dependent on the application of the transistor.

Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Description : Explain with circuit diagram, voltage divider biasing method and state its two advantages.

Last Answer : a)Here R1 and R2 forms voltage divider biasing arrangement. b)voltage drop across R2 ,forward biases the base emitter junction. c)so base current flows and hence collector ... Operating point stabilized against shift in temperature. · Operating point is almost independent of β variation

Define: i) Q point ii) DC loadline iii) Need of biasing iv) Current gain

Description : Define: i) Q point ii) DC loadline iii) Need of biasing iv) Current gain

Last Answer : i) Q point: It is the point on the load line which represents the dc current through a transistor (ICQ) and the voltage across it (VCEQ), when no ac signal is applied.  ii) DC load line: The ... region is as desired.  iv) Current Gain: It is a ratio of output current to input current.

List various transistor biasing methods.

Description : List various transistor biasing methods.

Last Answer : Types of biasing methods: i. Base bias (or fixed bias) ii. Base bias with emitter feedback. iii. Base bias with collector feedback iv. Voltage divider bias (or self bias) v. Emitter bias. 

State the need of biasing of BJT.

Description : State the need of biasing of BJT.

Last Answer : Need of biasing: The basic need of transistor biasing is to keep the base-emitter (B-E) junction properly forward biased and the collector-emitter (C-E) junction properly reverse biased ... transistor biasing is necessary for normal and proper operation of transistor to be used for amplification. 

Draw circuit diagram of voltage divider biasing list two advantages of voltage divider biasing of BJT.

Description : Draw circuit diagram of voltage divider biasing list two advantages of voltage divider biasing of BJT.

Last Answer : Two advantages of voltage divider biasing of BJT. 1. It is very simple method of transistor biasing. 2. The biasing conditions can be very easily set. 3. there is no loading of ... 5. The resistor RE introduces a negative feedback. So all the advantages of negative feedback are obtained. 

Define biasing of transistor

Description : Define biasing of transistor

Last Answer : Biasing of transistor is the process that makes the base emitter junction of transistor always forward biased and collector junction reverse biased for achieving the faithful amplification .

A bipolar junction transistor (BJT) is used as a power control switch by biasing it in the cut-off region

Description : A bipolar junction transistor (BJT) is used as a power control switch by biasing it in the cut-off region (OFF state) or in the saturation region (ON state). In the ON state, for ... base-collector junction is reverse biased (D) both the base-emitter and base-collector junctions are forward biased

Last Answer : A BJT is as a power control switch by biasing it in cut-off region (OFF state) or in the saturation region (ON state). In  ON state, for BJT both the base-emitter and base- collector junctions are forward biased

Which of the following statements is wrong for transistor biasing methods:

Description : Which of the following statements is wrong for transistor biasing methods:  1. The base resistor method does not provide stabilization of operating point 2. The biasing with feedback ... than collector feedback method 4.Voltage divider bias is widely used because it has stable operating point

Last Answer : Which of the following statements is wrong for transistor biasing methods:  1. The base resistor method does not provide stabilization of operating point 2. The biasing with feedback ... than collector feedback method 4.Voltage divider bias is widely used because it has stable operating point