What is Lenz's formula ?

What is Lenz's formula ?
by

1 Answer

Answer :

The induced current flowing through the conductive wire due to the induced electromagnetic ball creates a magnetic field around the conductor wire , which prevents the origin of the induced current through it (i.e. the changing magnetic field).
by

Related questions

What is Lenz's formula ?

Description : What is Lenz's formula ?

Last Answer : The lens formula is an easy way to understand how the electromagnetic circuit complies with Newton's 3rd law and energy conservation law. Lenz's law is named after Henrik Lenz. It is said ... force increases the current all the time, and its magnetic field opposes the actual magnetic field.

Write the limitations of Kelvin's formula ?

Description : Write the limitations of Kelvin's formula ?

Last Answer : As sometimes the cross section of the wire is so low that the regulation increases as the voltage drop increases . Increases , interest and waste change as space and time change.

Write Kelvin's formula ?

Description : Write Kelvin's formula ?

Last Answer : In the case of energy transport , the cross-section of the lowest cost line conductor will occur only when the annual waste and interest cost is equal to the annual waste cost .

Transformer is based on which formula ?

Description : Transformer is based on which formula ?

Last Answer : It is based on Faraday's formula. Now the question may arise that Mr. Faraday said that in order to occupy a magnetic field with another coil, one of them must move. Tachara flux will not be obsessed ... DC. So it does not have to be shaken separately. Because its waves tend to be self-evident.

Write the formula from Star to Delta ?

Description : Write the formula from Star to Delta ?

Last Answer : Answer : Dividing the product of the resistors connected to the star by dividing the resistors of the opposite arm by taking two together, the quotient is equal to the value of each resistor connected.

Write the formula for inductive reaction ?

Description : Write the formula for inductive reaction ?

Last Answer : Formula for inductive reactance: XL = 2τƒL . It depends on the frequency and inductance of the coil. Since the inductance of a coil is constant, its inductive reactance changes at a rate proportional to the change in frequency.

What is the formula of lens ?

Description : What is the formula of lens ?

Last Answer : The direction of the electric current induced by the electromagnetic induction will be such that the flow will always interfere with the cause of the current.

What is the formula for synchronous speed ?

Description : What is the formula for synchronous speed ?

Last Answer : Synchronous speed formula Ns = 120f / p

When does the formula of resistance apply ?

Description : When does the formula of resistance apply ?

Last Answer : When it is necessary to know the resistance of a conductor, the resistance formula is required.

What is the formula for determining the power in a circuit ?

Description : What is the formula for determining the power in a circuit ?

Last Answer : The formula for circuit power is P = V * I watt here , P is power V is voltage I is current.

What is the formula for diagnosing voltage deficiency ?

Description : What is the formula for diagnosing voltage deficiency ?

Last Answer : The formula for determining voltage deficit is V = IR

What is the formula for determining the efficiency of generator ?

Description : What is the formula for determining the efficiency of generator ?

Last Answer : Generator efficiency = (effective power * 100) / given power

What is the formula for motor efficiency ?

Description : What is the formula for motor efficiency ?

Last Answer : Motor efficiency = (output / input) 100

What is Ohm's voltage formula ?

Description : What is Ohm's voltage formula ?

Last Answer : : Current flowing through a conductor at a constant temperature is proportional to the voltage across the two ends of the conductor. Or the current flowing through a conductor at a constant ... to the voltage difference between the two ends of that conductor and disproportionate to the resistance.

The law that finds application in electrolysis is: a) Faraday's law b) Coulomb's law c) Ohm's law d) Lenz's law

Description : The law that finds application in electrolysis is: a) Faraday's law b) Coulomb's law c) Ohm's law d) Lenz's law

Last Answer : Ans: A

Lenz's law results from the law of conservation of (A) Mass (B) Momentum (C) Energy (D) None of these

Description : Lenz's law results from the law of conservation of (A) Mass (B) Momentum (C) Energy (D) None of these

Last Answer : (C) Energy

State Lenz's law.

Description : State Lenz's law.

Last Answer : The induced emf in any circuit is in a direction to oppose the effect that produced it.

“The direction of induced current is always so as to oppose the change which causes the Current” is the statement of: a. Faraday’s law b. Lenz’s Law c. Ohm’s Law d. Kirchoff’s rule.

Description : “The direction of induced current is always so as to oppose the change which causes the Current” is the statement of: a. Faraday’s law b. Lenz’s Law c. Ohm’s Law d. Kirchoff’s rule.

Last Answer : c. Ohm’s Law

Lenz’s law is in accordance with the law of conservation of: a. momentum b. Angular momentum c. charge d. energy

Description : Lenz’s law is in accordance with the law of conservation of: a. momentum b. Angular momentum c. charge d. energy

Last Answer : a. momentum

The Principle of an alternating current generator is based on: a. Coulomb’s law b. Ampere’s law c. Faraday’s law d. Lenz’s law

Description : The Principle of an alternating current generator is based on: a. Coulomb’s law b. Ampere’s law c. Faraday’s law d. Lenz’s law

Last Answer : a. Coulomb’s law

Lenz's law is an example of the law of conservation of one of the following. Is it conservation of: w) mass x) charge y) momentum z) energy

Description : Lenz's law is an example of the law of conservation of one of the following. Is it conservation of: w) mass x) charge y) momentum z) energy

Last Answer : ANSWER: Z -- ENERGY 

State Lenz’s law.

Description : State Lenz’s law.

Last Answer : Lenz’s Law: It states that the direction of electromagnetically induced emf is such that it always opposes the main cause of its production. Or It is expressed by equation E = - N (dΦ/dt) volts Where – sign indicate the direction EMF is induced opposite to rate of change of flux. 

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

What features should a switchgear have ?

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

What are the components of switch gear ?

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

What do you mean by switchgear ?

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

What is an Earth Electrode ?

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

What earthing is done in hilly areas ?

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

What should be the size of rod earthing ?

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

What does earth continuity mean ?

Description : What does earth continuity mean ?

Last Answer : The conduction wire that connects the earthing lead to the metal cover of electrical furniture, appliances, or wiring is called the earth continuity wire.

Which earthing is less expensive ?

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

What should be the size of the pipe electrode ?

Description : What should be the size of the pipe electrode ?

Last Answer : The size of the pipe electrode should be 36 mm diameter 2 to 2.75 m long galvanized iron or steel pipe.

How many types of earthing and what are they ?

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

What are the essential elements for earthing ?

Description : What are the essential elements for earthing ?

Last Answer : They are _ a) earthen continuity b) earthing lead c) earthy electrode

What is the best earthing method ?

Description : What is the best earthing method ?

Last Answer : Pipe earthing method is best. This is because it is less expensive and when the soil dries out in the dry season , regular earthing can be done by pouring water through the pipes.