How many types of counters based on input clock pulse ?

1 Answer

Answer :

2 types of counters based on input clock pulse.

Related questions

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Description : Does this treadmill offer a pulse checker and calories burned clock?

Last Answer : Yes, this LifeSpan treadmill does offer a pulse checker and a calories burned clock.

Description : For JK flipflop J = 0, K=1, the output after clock pulse will be (A) 1. (B) no change. (C) 0. (D) high impedance.

Last Answer : Ans: C J=0, K=1, these inputs will reset the flip-flop after the clock pulse. So whatever be the previous output, the next state will be 0.

Description : For JK flip flop with J=1, K=0, the output after clock pulse will be (A) 0. (B) 1. (C) high impedance. (D) no change.

Last Answer : (B) 1.

Description : Synchronization is achieved by a timing device called a ................. which generates a periodic train of .................. (A) clock generator, clock pulse (B) master generator, clock pulse (C) generator, clock (D) master clock generator, clock pulse

Last Answer : Answer: A and D

Description : In a positive edge triggered JK flip-flop, J = 1, K = 0 and clock pulse is rising, Q will be (a) 0 (b) 1 (c) showing no change (d) toggle 

Last Answer : In a positive edge triggered JK flip-flop, J =1, K= 0 and clock pulse is rising, a Q will be 1

Description : How many types of counters and what are they ?

Last Answer : There are mainly two types of counters. Namely: 1) Asynchronous counter and 2) Synchronous counter. 1. Asynchronous counter: Not all flip flops in the asynchronous counter receive the clock input ... . Synchronous counters: All counters in a synchronous counter are connected by a simple clock input.

Description : How many types of asynchronous counters ?

Last Answer : : 2 types of asynchronous counters.

Description : Signal normally used to study non-ideal flow by stimulus response technique is __________ input. (A) Pulse (B) Step (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Description : An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately (A) 1 MHz. (B) 500 MHz. (C) 2 MHz. (D) 4 MHz.

Last Answer : Maximum time taken for all flip-flops to stabilize is 75ns x 8 + 50 = 650ns. Frequency of operation must be less than 1/650ns = 1.5 MHz.

Description : A 3 -stage ripple counter has Flip Flop with propagation delay of 25 nsec and pulse width of strobe input 10 nsec. Then the maximum operating frequency at which counter operates reliably is

Last Answer : A 3 -stage ripple counter has Flip Flop with propagation delay of 25 nsec and pulse width of strobe input 10 nsec. Then the maximum operating frequency at which counter operates reliably is 12.67 MHz

Description : Any good counters to this "joke"?

Last Answer : Yes. Unfriend .

Description : How normal is it for cats to walk on kitchen counters and the table?

Last Answer : Pretty normal for our cats.

Description : How do you teach a kitten (5 months) not to jump up on counters and tables?

Last Answer : Put aluminum foil up on the countertops. Cats hate the texture and sound of aluminum foil.

Description : Are your pets allowed to sleep on your bed, walk on your table or kitchen counters?

Last Answer : No, No, and No. I don't have pets and when I did they were not allowed to do any of those things. My last dog would not even come into the kitchen, he would stop at the kitchen door and just look in. ... the same rag. Eeewww!. As far as sleeping in the bed, I only know a lot of people that allow it.

Description : How do I get the stains out of my kitchen counters?

Last Answer : Bleach is the best. Sorry, the natural ones don’t cut it for old counters with stains. Otherwise, new stain resistant counters would solve the problem.

Description : can non-account holders use the coin counters at Commerce Bank?

Last Answer : YES! I did it last year, and I had 20 dollars worth of pennies. It was great!

Description : How can I teach my cat to stay off the counters?

Last Answer : squirt him with a squirt gun every time he jumps up there

Description : received an orchid for mothers day. now I have teeny tiny critters scooting all over my counters. help!

Last Answer : sounds like bugs in the soil...................check on Selvin and see if this orchard is on their list of plants................if so.............take it outside.....mix a batch ... the bottom until the bubbles stop............clean your counter with some vinegar and water...........white vinegar.

Description : Counters marked 1, 2, 3 are placed in a bag and one is drawn and replaced. -Maths 9th

Last Answer : (b) \(rac{7}{27}.\)Let S be the sample space of drawing a counter three times and replacing it each time. Then, n(S) = 3 3 3 = 27 Let A : Event of obtaining a total of 6 in the three draws of counters. Then, A = {(1, 2, 3), ... (2, 2, 2)} ⇒ n(A) = 7 ∴ P(A) = \(rac{n(A)}{n(S)}\) = \(rac{7}{27}.\)

Description : What is the number of counters that can be counted ?

Last Answer : The number that the counter can count is called modulus.

Description : What board came was played with counters and throw stick?

Last Answer : What is the answer ?

Description : What does the word 'truncated' mean in reference to counters?

Last Answer : What is the answer ?

Description : What force counters gravity?

Last Answer : Lots of forces can counter gravity. For instance, when you arestanding on the floor, the floor pushes you up, and thus countersthe force of gravity. There are other options as well; forinstance, if a magnet lifts a piece of iron, the magnet iscountering the force of gravity.

Description : What force counters gravity?

Last Answer : Lots of forces can counter gravity. For instance, when you arestanding on the floor, the floor pushes you up, and thus countersthe force of gravity. There are other options as well; forinstance, if a magnet lifts a piece of iron, the magnet iscountering the force of gravity.

Description : Do granite counters chip easy?

Last Answer : Granite counters can withstand a lot of wear and tear, which is part of what makes them so appealing. Just as long as you're not constantly dropping plates held above your head, your counter will do just fine for years to come.

Description : Components that provide internal storage to the CPU are ______ a) Registers b) Program Counters c) Controllers d) Internal chips

Last Answer : Answer: a Explanation: The Registers are the fast storage units. They are responsible for storing intermediate computational results in the CPU. The registers can be user accessible or inaccessible

Description : What connector is popular in attaching test instruments like oscilloscopes, frequency counters, spectrum analyzers, etc? A. UHF connector B. PL-259 C. BNC D. SMA

Last Answer : C. BNC

Description : hat establishes the value of the current that flows in the output of figure 4-43?

Last Answer : The frequency of the voltage input.

Description : J-K FFs used in counters are wired to perform what function?

Last Answer : Toggle.

Description : The DME counters are rotating continuously. This indicates that: a. The DME is unserviceable b. The DME is trying to lock onto range c. The DME is trying to lock onto frequency d. The DME is receiving no response from the ground station

Last Answer : b. The DME is trying to lock onto range

Description : Data can be changed from special code to temporal code by using (A) Shift registers (B) counters (C) Combinational circuits (D) A/D converters.

Last Answer : Ans: A Data can be changed from special code to temporal code by using Shift Registers. (A Register in which data gets shifted towards left or right when clock pulses are applied is known as a Shift Register.)

Description : List and explain the different counters of PLC in detail.

Last Answer : A counter in PLC is an instruction equivalent to mechanical counter. A counter block of PLC has two control inputs, Count line and Reset line. When count line makes FALSE-to-TRUE transition, the counter ... down counter. The up-down counter has three inputs, count up, count down and reset.

Description : Register and counters are similar in the sense that they both   (A) count pulses (B) store binary operation (C) shift operation (D) made from an array of flip flops and gates integrated on a single chip

Last Answer : Register and counters are similar in the sense that they both made from an array of flip flops and gates integrated on a single chip

Last Answer : Timers:-A timer is a peripheral device that can measure time intervals. Timers can be used to1. General events at the specific time or to determine the duration of two external events.eg. Keeping a ... the number of times the car wheel rotates in one second, in order to determine cars speed.

Description : Which is the input of control unit: a. Master clock signal b. Instruction register c. Flags d. Control signals from bus e. Allof these

Last Answer : e. Allof these

Description : The output of a JK flipflop with asynchronous preset and clear inputs is 1'. The output can be changed to 0' with one of the following conditions. (A) By applying J = 0, K = 0 and using a clock. (B) ... (C) By applying J = 1, K = 1 and using the clock. (D) By applying a synchronous preset input.

Last Answer : Ans: C Preset state of JK Flip-Flop =1 With J=1 K=1 and the clock next state will be complement of the present state.

Description : Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What ... (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec 

Last Answer : (B) 4x106 bytes/sec

Description :  A J -K flip-flop with J= 1 and K= 1 has a 20 kHz clock input. The Q output is : (A) Constant and low (B) Constant and high (C) A square wave with 20 kHz frequency (D) A square wave with 10 kHz frequency

Last Answer : a

Description : An atomic clock is based on transitions in - (1) Sodium (2) Caesium (3) Magnesium (4) Aluminium

Last Answer : (2) Caesium Explanation: An atomic clock is a clock device that uses an electronic transition frequency in the microwave, optical, or ultraviolet region of the electromagnetic spectrum of atoms ... the wave frequency of television broadcasts, and in global navigation satellite systems such as GPS.

Description : The SI standard of time is based on-------? A. the daily rotation of the earth B. the frequency of light emitted by Kr86 C. the yearly revolution of the earth about the sun D. a precision pendulum clock E. none of these (Answer)

Last Answer : E. none of these (Answer)

Description : An atomic clock is based on transitions in (1) Sodium (2) Caesium (3) Magnesium (4) Aluminium

Last Answer : Caesium

Description : How many types of pulse in human body and what ?

Last Answer : : The difference between the two types of blood pressure is called pulse pressure . One is systolic pressure , the other is diastolic pressure.

Description : Define pulse modulation. State its types. 

Last Answer : Pulse Modulation - consists essentially of sampling analog information signals and then converting those samples into discrete pulses. OR It consists essentially of sampling analog information signals and then converting those ... PAM - PWM - PPM  ii) Digital Pulse Modulation - PCM - DM - ADM 

Description : A bit-stuffing based framing protocol uses an 8-bit delimiter pattern of 01111110. If the output bit-string after stuffing is 01111100101, then the input bit-string is a. 0111110100 b. 0111110101 c. 0111111101 d. 0111111111

Last Answer : b. 0111110101

Description : BEE Energy efficiency ratings are based on a) Savings in cost c) savings in electricity consumption b) Savings in input d) savings in machinery

Last Answer : savings in electricity consumption

Description : BEE Star rating is based on _____________ a. Power consumption b. Power Input c. Power Out put d. none of these

Last Answer : Ans: - a. Power consumption

Description : .In an 8085 based system, the maximum number of input output devices can be connectedusing I/0 mapped I/O method isa) 64 b) 512 c) 256 d) 65536

Last Answer : b) 512

Description : Based on the identification of objectives, input, output and file content, the vital document is called … A) System Definition B) System Document C) System Requirement Document D) System Subject

Last Answer : B) System Document

Description : Leontief’s input output model is based on the concept of----- (a) Consumption function (b) Partial Equilibrium © General Equilibrium. (d) All of the above.

Last Answer : © General Equilibrium.