How To Make Cascade Generator

1 Answer

Answer :

This cascade engine was invented in the 1930’s by a 17-year old amateur experimenter who was simply trying to make a new version of the old Fizeau’s condenser. Instead, he discovered a revolutionary new propulsion system which he patented as the “Electric Rocket.”

Standard Oil of New Jersey (now MOBIL) reportedly paid the lad one million dollars for his patent, swore him to secrecy and signed a contract calling for forfeiture of the money should he tell anyone of his invention.

Why? Because this device can and will make fossil fuels obsolete. Not only can it provide clean, safe, and efficient propulsion for vehicles, aircraft, spacecraft and machinery of every type, it can also be used to run ordinary electrical generators, and collect far more energy than is required to keep it running.

The better you make and assemble your engine, and the greater the heat capacity of the insulating material between the disks, the longer it will produce a “thrust” of open-curve gravitational waves before it requires another charge. If you were to use titanium dioxide dielectric compounds, it could conceivably run for centuries on a single charge!

T. Townsend Brown worked on the principles of electro-gravitation for about 50 years and invented many fantastic devices, most of which were suppressed. The government did not give him funding to develop electro-gravitic propulsion, but they did manage to steal some of his best ideas, and used their own scientists to continue development and refinement of his engines in secret.

Many UFO sightings, especially in the 1940’s and 1950’s were experimental aircraft being tested by the American government. The cascade engines, or some versions of them, have been used on aircraft and spacecraft for nearly 50 years, yet the technology will not be used on vehicles driven by the general public simply because the fossil fuel economies of the entire world would crumble overnight!

The engine described here is simple, if a bit crude, but it works by directly utilizing the gravitic fields that accompany high voltage, low amp electricity. It might be possible to build energy self-sufficient cars by using flywheel generators connected to the wheels, and perhaps a turbine generator in the “wake” of the array. These cascade generators might be enough to drive energy self-sufficient vehicles until someone re-discovers free energy receivers.

(Note: Some free energy receivers may already be in use in some spacecraft).

Capacitor Array Gravitational Warp engine

The technical name for this device is Capacitor Array Gravitational Warp engine, however, it is not really a capacitor but, rather, a conduit for pulsing high voltage, low amperage electricity to effect gravitic propulsion.

Conventional science tells us that “the attractive force” between + and - plates of a capacitor varies inversely with the square of the distance between the plates. What they don’t mention is that this is precisely the equation for gravitation.

High voltage, low amperage electricity is accompanied by gravitational fields, just as ordinary current electricity is accompanied by strong magnetic fields. Using electrogravitation is much different from using electromagnetism, however.

A dielectric must be used that will allow the pulsing energy to cascade through the array without overheating and/or burning through. (Titanium dioxide or Bakelite litharge)?

Staggering the inner and outer diameters of the plates and overlapping the plates from layer to layer causes an undulating cascade effect. The energy flows in a circular zig-zag between inner diameters from small to large plates as well as around the outer diameter of the small plates.

Small and large plates must have the same surface area, which can be accomplished by varying inner and outer diameters in the right proportions.

The cylindrical configuration causes a gravitic “doughnut” or “smoke ring” field to pulse through the array with the high voltage energy. This has a direct gravitational action/reaction on the dielectric and plates, as well as on surrounding space, especially along the axis of motion.

Each pulse causes a gravitic ripple, and these ripples link to create a wave form. The faster it is pulsed, and the higher the voltage, the better the wave form. The energy is pulsed into the positive end of the array and moves toward the negative end or ground or lower potential as does lightning.

High voltage coils, as well as van der Graaff generators and Wimshurst machines produce energy suitable for charging the Cascade Generator. Propulsion is accomplished as energy cascades through the grid carrying a gravitational warp field with it, creating a gravitic “pressure” wave in the surrounding space. Higher voltage and pulse rate generates greater thrust.

Related questions

Description : State the need of cascade amplifier and draw circuit diagram of 2-stage direct coupled amplifier.

Last Answer : Need:- The voltage (or power) gain, obtained from a single stage small signal amplifier, is limited. Therefore, it is not sufficient for all practical applications. Therefore, in order to obtain greater voltage and power gain, cascade amplifiers are used.

Description : State the need of cascade amplifier.

Last Answer : Most systems a single transistor amplifier does not provide sufficient gain or bandwidth or will not have the correct input or output impedance matching. Hence cascade amplifier is use which consist more than one stages of amplification.

Description : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Last Answer : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be 3

Description : Two port networks are connected in cascade. The parameters of the network are obtained by multiplying in individual

Last Answer : Two port networks are connected in cascade. The parameters of the network are obtained by multiplying in individual ABCD parameter matrix

Description : How To Make A Simple Dry Ice Fog Generator

Last Answer : You can make a very simple, yet effective fog generator for use with an air cannon, or for use at parties or with laser experiments. The fog generator is made from an ice chest. I use an inexpensive ... hose. That's it! When the fog generation diminishes, recharge with hot water and/or more dry ice.

Description : Owners manual for an Eastern Steel generator?

Last Answer : If it is this one it has been reviewed on Amazon. Perhaps one of the reviewers could help?

Description : How Does a Van de Graaff Generator Work?

Last Answer : How Does a Van de Graaff Generator Work? The Van De Graaff generator is an energy source. It could produce up to 20 million volts in charge. It is used for various physics experiments. Examples would be ... . This is a theory affected by so many factors. Time will be the sole judge of that theory.

Description : How to Build a Wind Generator

Last Answer : How to Build a Wind Generator Energy consumption is a serious concern for many people, especially those who are conscious of carbon emissions and global warming. Alternative energy sources ... have an economical, sustainable, and environmentally-friendly solution to your power and energy needs.

Description : How to Build a Hydro Generator

Last Answer : How to Build a Hydro Generator How to Build a Hydro Generator Hydroelectricity generators are capable of producing electricity using hydropower. It is a form of convertible energy. Small hydro ... of electricity to homes and business centers thousands of kilometers away through a network of wires.

Description : How to choose a diesel generator?

Last Answer : Diesel generators are widely used in various fields as the main or safety source of electricity. Stability in this case plays one of the most important roles, therefore, the choice of a ... purpose of the device, the most convenient and versatile are generators with an automatic control mode.

Description : Briefly explain how an electrical generator converts mechanical energy into electrical energy.

Last Answer : Working principle of DC generator: * Working principle of DC generator is the principle of dynamically induced emf or electromagnetic induction. * According to this principle, when flux is cut by a conductor, an ... , the flux is cut by the armature winding and an emf is dynamically induced in it. 

Description : What is the difference between Generator and Motor?

Last Answer : If a rotating machine delivers a power as output it is called generator. If power required to rotate a machine it is called motor.

Description : applications of : (1) Function generator   (2) Video pattern generator (3) AF signal generator and (4) Pulse generator. 

Last Answer : 1) Function generator: i) As trouble shooting tool to different analog and digital circuits. ii) As a source of alignment of different receiver. iii) If rise time of square wave is ... trigger output, pulses are available. iii) The generator can be operated as free running generator.

Description : AC generator

Last Answer : A.C power can be generated as a single phase or as a balanced poly-phase system. However, it was found that 3-phase power generation at 50 Hz will be economical and most suitable. Present day three phase generators ... has uniform air gap (figure 2.1(b)) and used when speed is high. 

Description : State the function of commutator in DC generator and name the material used for commutator.

Last Answer : Function of Commutator: Commutator converts AC induced in armature winding into DC for external load. Material: i) Commutator segments are made up of Copper. ii) Commutator segments are insulated from each other by Mica.

Description : With a neat diagram explain doubly fed induction generator (DFIG). 

Last Answer : Diagram of Doubly fed induction generator (DFIG):  Explanation :-  DFIG can feed power through the stator as well as rotor to the grid. The stator is directly connected to the fixed frequency ... voltage is 690 V AC. So it must be step up to 33 KV to connect to power grid.  

Description : Explain the choice of size and number of generator units in a power plant. 

Last Answer : Selection of Size and Number of Generating Units:  1. The size/rating and number of generating units in such way that they approximately match with the load curve/load duration curve as ... power plant is connected to grid system then generating unit of higher capacity can be installed.

Description : Explain Squirrel Cage Induction Generator (SCIG) and also draw a diagram. 

Last Answer : Explanation (Operation):- In this system gearbox is used to increase the speed of high speed shaft as per design. IG require reactive power for excitation. Rotor of SCIG is ... , variable voltage output of the generator into the fixed frequency, fixed voltage output required for grid. 

Description : List out any four salient features of hydro generator.

Last Answer : Following are the salient features of a Hydro Generator (alternator):  It is 3-ph hydro generator (alternator). It is robust in construction. A separate excitation is given to ... & under frequency protection, 5. Over temperature protection are main protections provided to generator.

Description : What is the choice of size and number of generator units in interconnected power system?

Last Answer : Choice of Size and Number of Generating Units: 1. The size/rating and number of generating units in such way that they approximately match with the load curve as closely as possible. 2. In ... , if power plant is connected to grid system then generating unit of higher capacity can be installed.

Description : Explain how sinusoidal AC voltage is generated by using simple one loop generator.

Last Answer : An electric current produced by means of electrical machine is known as generator which converts mechanical energy into electrical energy. When conductor cuts the magnetic flux, emf induced in it. (Faraday' ... upon position of armature. The nature of emf is alternating as shown by the waveform. 

Description : List any four applications of function generator.

Last Answer : Applications of function generator: 1. To test the bandwidth of audio frequency amplifier. 2. Used for troubleshooting of different analog and digital circuits. 3. Acts as source for alignment of receivers 4. For generation of different waves.

Description : Draw a labeled block diagram of sine wave generator and state function of each block. 

Last Answer : Function Generator:  This instrument can deliver sine, triangular & square waves with frequency range of 0.01 Hz to 100 kHz.  The frequency control network is governed by a frequency ... voltage reaches a predetermined level on the negative slope of the integrator's output voltage.

Description : Draw block diagram of function generator. Write applications of function generator.

Last Answer : Applications of Function Generator: 1. To test the bandwidth of audio frequency amplifier 2. It can produce sine wave, triangle wave, saw tooth wave, even arbitrary waveform. 3. ... for troubleshooting of different analog and digital circuits 7. Acts as source for alignment of receivers.

Description : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when

Last Answer : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when The incremental fuel cost of each plant multiplied by the penalty factor is the same

Description : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is

Last Answer : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is 0.87

Description : A _________ is used to measure the stator % winding temperature of the generator.  (A) Thermocouple (B) Pyrometer (C) Resistance thermometer (D) Thermometer

Last Answer : A Resistance thermometer is used to measure the stator % winding temperature of the generator. 

Description : The fall in speed of a dc generator due to increase in load can be corrected by  (1) cooling the armature.. (2) increasing the excitation. (3) reducing the load voltage. (4) increasing the input to the prime mover

Last Answer : It   can  be  corrected  by  increasing  the  input  to  the  prime  mover.

Description : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is :  (A) 256 W (B) 320 W (C) 500 W (D) 625 W

Last Answer : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is : 625 W

Description : In a synchronous generator if the excitation increased from a low value to normal value, with a fixed load  (A) The armature current increases and the power factor decreases  (B) The armature ... but is lagging  (D) The armature current decreases and the power factor increases and is leading

Last Answer : In a synchronous generator if the excitation increased from a low value to normal value, with a fixed load The armature current decreases and the power factor increases and is leading

Description : In a DC generator the windings of interpoles are connected :  (A) in series with main field winding, to create a pole,of same polarity as the main pole ahead in the direction of rotation.  ... winding, to create a pole of opposite polarity as the main pole ahead in the direction of rotation.

Last Answer : In a DC generator the windings of interpoles are connected :  in series with the armature winding, to create a pole of same polarity as the main pole ahead in the direction of rotation. 

Description : In a synchronous generator delivering lagging power factor load  (1) the excitation emf leads terminal voltage by the power angle (2) the excitation emf lags terminal voltage by the power angle (3) ... by the power factor angle (4) excitation emf lags the terminal voltage by the power factor angle

Last Answer : In a synchronous generator delivering lagging power factor load the excitation emf leads terminal voltage by the power angle

Description : A large AC generator, supplying power to an infinite bus, has a sudden short-circuit occurring at its terminals. Assuming the prime mover input and the voltage behind the transient reactance to remain constant immediately after the fault, acceleration of the generator rotor is

Last Answer : A large AC generator, supplying power to an infinite bus, has a sudden short-circuit occurring at its terminals. Assuming the prime mover input and the voltage behind the transient reactance ... , acceleration of the generator rotor is inversely proportional to the moment of inertia of the machine

Description : The armature reaction in a synchronous generator supplying leading power factor load is (A) magnetizing (B) demagnetizing (C) demagnetizing and cross-magnetizing (D) magnetizing and cross-magnetizing

Last Answer : The armature reaction in a synchronous generator supplying leading power factor load is magnetizing and cross-magnetizing

Description : The terminal characteristics of a dc generator suitable for electric welders is (A) separately excited generator (B) shunt generator (C) series generator (D) differentially compounded generator

Last Answer : The terminal characteristics of a dc generator suitable for electric welders is differentially compounded generator

Last Answer : The critical resistance of the D.C. generator is the resistance of field.

Last Answer : Armature reaction in a generator results in demagnetisation of leading pole tip and magnetisation of trailing pole tip.

Description : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be?

Last Answer : If residual magnetism is present in a D.C. generator, the induced e.m.f. at zero speed will be zero.

Last Answer : In a separately excited generator supplying rated load the armature reaction is always present.

Last Answer : A 220 V D.C. generator is run at full speed without any excitation. The open circuit voltage will be about 2 V.

Description : A sinusoidal voltage of 5 Hz is applied to the field of a shunt generator. The armature voltage wave?

Last Answer : A sinusoidal voltage of 5 Hz is applied to the field of a shunt generator. The armature voltage wave will be of 5 Hz.

Last Answer : In a level compounded D.C. generator, full load terminal voltage is equal to no-load terminal voltage.

Last Answer : In over compounded generator, full load terminal voltage is more than no load terminal voltage.

Last Answer : In case of a flat compounded generator voltage remains constant irrespective of the load.

Last Answer : An exciter for a turbo generator is a shunt generator.

Last Answer : In a D.C. generator in case the resistance of the field winding is increased, then output voltage will decrease.

Last Answer : A D.C. generator can be considered as rotating amplifier.

Last Answer : A cumulatively compounded long shunt generator when operating as a motor would be differentially compounded long shunt.

Last Answer : In a D.C. generator, the critical resistance refers to the resistance of field.

Description : The e.m.f. induced in the armature of a shunt generator is 600 V. The armature resistance is 0.1 ohm. If the armature current is 200 A, the terminal voltage will be?

Last Answer : The e.m.f. induced in the armature of a shunt generator is 600 V. The armature resistance is 0.1 ohm. If the armature current is 200 A, the terminal voltage will be 580 V.