Brushes of D.C. machines are made of (a) carbon (b) soft copper (c) hard copper (d) all of above

Brushes of D.C. machines are made of
(a) carbon
(b) soft copper
(c) hard copper
(d) all of above
by

1 Answer

Answer :

Ans: a
by

Related questions

The material for commutator brushes is generally (a) mica (b) copper (c) cast iron (d) carbon

Description : The material for commutator brushes is generally (a) mica (b) copper (c) cast iron (d) carbon

Last Answer : Ans: d

Copper brushes in D.C. machine are used (a) where low voltage and high currents are involved (b) where high voltage and small cur-rents are involved (c) in both of the above cases (d) in none of the above cases

Description : Copper brushes in D.C. machine are used (a) where low voltage and high currents are involved (b) where high voltage and small cur-rents are involved (c) in both of the above cases (d) in none of the above cases

Last Answer : Ans: a

In lap winding, the number of brushes is always (a) double the number of poles (b) same as the number of poles (c) half the number of poles (d) two

Description : In lap winding, the number of brushes is always (a) double the number of poles (b) same as the number of poles (c) half the number of poles (d) two

Last Answer : Ans: b

In a commutator (a) copper is harder than mica (b) mica and copper are equally hard (c) mica is harder than copper (d) none of the above

Description : In a commutator (a) copper is harder than mica (b) mica and copper are equally hard (c) mica is harder than copper (d) none of the above

Last Answer : Ans: c

In case of D.C. machines, mechanical losses are primary function of (a) current (b) voltage (c) speed (d) none of above

Description : In case of D.C. machines, mechanical losses are primary function of (a) current (b) voltage (c) speed (d) none of above

Last Answer : Ans: c

The insulating material used between the commutator segments is normally (a) graphite (b) paper (c) mica (d) insulating varnish

Description : The insulating material used between the commutator segments is normally (a) graphite (b) paper (c) mica (d) insulating varnish

Last Answer : Ans: c

In D.C. generators, current to the external circuit from armature is given through (a) commutator (b) solid connection (c) slip rings (d) none of above

Description : In D.C. generators, current to the external circuit from armature is given through (a) commutator (b) solid connection (c) slip rings (d) none of above

Last Answer : Ans: a

Iron losses in a D.C. machine are independent of variations in (a) speed (b) load (c) voltage (d) speed and voltage

Description : Iron losses in a D.C. machine are independent of variations in (a) speed (b) load (c) voltage (d) speed and voltage

Last Answer : Ans: b

A separately excited generator as compared to a self-excited generator (a) is amenable to better voltage con-trol (b) is more stable (c) has exciting current independent of load current (d) has all above features

Description : A separately excited generator as compared to a self-excited generator (a) is amenable to better voltage con-trol (b) is more stable (c) has exciting current independent of load current (d) has all above features

Last Answer : Ans: d

In a four-pole D.C. machine (a) all the four poles are north poles (b) alternate poles are north and south (c) all the four poles are south poles (d) two north poles follow two south poles

Description : In a four-pole D.C. machine (a) all the four poles are north poles (b) alternate poles are north and south (c) all the four poles are south poles (d) two north poles follow two south poles

Last Answer : Ans: b

Which of the listed conditions might contribute to very rapid wearing of a DC machine's commutator bars? A. A grounded commutator bar B. Using improper carbon brushes C. Aligning the front and rear mica V-rings improperly D. An open circuit in the armature

Description : Which of the listed conditions might contribute to very rapid wearing of a DC machine's commutator bars? A. A grounded commutator bar B. Using improper carbon brushes C. Aligning the front and rear mica V-rings improperly D. An open circuit in the armature

Last Answer : Answer: B

The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Description : The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Last Answer : (A) soft magnetic materials.

Brushes of D.C. machines are made of?

Last Answer : Brushes of D.C. machines are made of carbon.

Which of the following brushes can be used for high values of current density ? (a) Metal graphite brushes (b) Hard carbon brushes (c) Electro-graphitic brushes (d) Natural graphite brushes

Description : Which of the following brushes can be used for high values of current density ? (a) Metal graphite brushes (b) Hard carbon brushes (c) Electro-graphitic brushes (d) Natural graphite brushes

Last Answer : (a) Metal graphite brushes

_____ brushes are fragile and cause excessive wear of commutator, (a) Natural graphite (b) Hard carbon (c) Electro graphitic (d) Metal graphite

Description : _____ brushes are fragile and cause excessive wear of commutator, (a) Natural graphite (b) Hard carbon (c) Electro graphitic (d) Metal graphite

Last Answer : (a) Natural graphite

Etched or burned bands on the contact faces of the brushes in a direct current generator can be caused by ____________. A. high mica segments B. copper drag on the commutator C. brushes improperly positioned D. copper embedded in the brushes

Description : Etched or burned bands on the contact faces of the brushes in a direct current generator can be caused by ____________. A. high mica segments B. copper drag on the commutator C. brushes improperly positioned D. copper embedded in the brushes

Last Answer : Answer: C

Copper brushes in D.C. machine are used?

Last Answer : Copper brushes in D.C. machine are used where low voltage and high currents are involved.

Why is diamond hard whereas graphite soft even through both are crystalline forms of carbon?

Description : Why is diamond hard whereas graphite soft even through both are crystalline forms of carbon?

Last Answer : The reason for difference is because of arrangement of carbon atoms.

Why is diamond hard whereas graphite soft even through both are crystalline forms of carbon?

Description : Why is diamond hard whereas graphite soft even through both are crystalline forms of carbon?

Last Answer : The reason for difference is because of arrangement of carbon atoms.

How many carbon brushes does an electric motor have ?

Description : How many carbon brushes does an electric motor have ?

Last Answer : Electric motor has 1 carbon brush.

The purpose of the commutator and brushes on a DC generator is to _____________. A. transfer generated direct current voltage from the armature to the line B. convert the alternating voltage generated within the armature to a direct voltage C. provide a sliding contact method to excite the field D. reduce sparking between the armature and the carbon brushes

Description : The purpose of the commutator and brushes on a DC generator is to _____________. A. transfer generated direct current voltage from the armature to the line B. convert the alternating voltage ... contact method to excite the field D. reduce sparking between the armature and the carbon brushes

Last Answer : Answer: B

The current from the stator of an alternator is taken out to the external load circuit through (A) slip rings. (B) commutator segments. (C) solid connections. (D) carbon brushes.

Description : The current from the stator of an alternator is taken out to the external load circuit through (A) slip rings. (B) commutator segments. (C) solid connections. (D) carbon brushes.

Last Answer : (C) solid connections.

Carbon brushes are used in electric motors to: ...

Description : Carbon brushes are used in electric motors to:  (1) Brush off carbon deposit on the commutator (2) Provide a path for flow of current (3) Prevent overheating of armature windings (4) Prevent sparking during commutation

Last Answer : Carbon brushes are used in electric motors to: Provide a path for flow of current.

The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Last Answer : Option C

(3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic a big drawback of washing with soap is that the minerals in water react with those in soap, leaving an insoluble film. Detergents react less to minerals in water and for all practical purposes are the product of choice for laundry, unless you have very soft water. On the other hand, soap will combine with the magnesium and calcium ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Description : (3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic a big drawback of washing with soap is that the minerals in water ... ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Last Answer : What is the objective of the 'Kyoto Protocol'? (1) To abolish child labour (2) To eliminate nuclear weapons (3) To increase ground water levels (4) To reduce greenhouse gases

(3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic. a big drawback of washing with soap is that the minerals in water react with those in soap, leaving an insoluble film. Detergents react less to minerals in water and for all practical purposes are the product of choice for laundry, unless you have very soft water. On the other hand, soap will combine with the magnesium and calcium ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Description : (3) Detergents give lather even with hard water Explanation: Soaps are made of materials found in nature. Detergents are synthetic. a big drawback of washing with soap is that the minerals in water ... ions in hard water to create an insoluble residue that can clog drains and stick to clothing.

Last Answer : Cement is usually a mixture of – (1) Calcium silicate and calcium alurninate (2) Calcium silicate and calcium ferrate (3) Calcium aluminate and calcium ferrate (4) Lime stone and silicon dioxide

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D

For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete (1 : 2 : 4) is laid on the base course and the surface is made smooth by trowelling (C) Glass strips are driven into the layer according to the pattern required (D) After final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Description : For constructing a terrazzo floor, Pick up the incorrect statement from the following: (A) A base course is prepared as in cement concrete flooring (B) A 32 mm thick layer of cement concrete ... final grinding is over, oxalic acid mixed with water is spread over and rubbed hard with soft material

Last Answer : Answer: Option B

Permanent magnets are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) semi conductors. (D) super conductors.

Description : Permanent magnets are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) semi conductors. (D) super conductors.

Last Answer : (B) hard magnetic materials.

Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room temperature? A. Ingredients dissolve better in chilled water B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Description : Coke is made by heating coal in the absence of air at: A. 700 °C B. 1300 °C C. 900 °C D. 1700 °C ANSWER: Why are soft drinks made with chilled water rather than water at room ... B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Last Answer : ANSWER: C

Why are soft drinks made with chilled water rather than water at room temperature? A. Ingredients dissolve better in chilled water B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Description : Why are soft drinks made with chilled water rather than water at room temperature? A. Ingredients dissolve better in chilled water B. Chilled water enhances the taste C. Chilled water attracts more carbon dioxide D. Chilled water is more hygienic

Last Answer : ANSWER: C

Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel

Last Answer : a. Soft centre steel

39 Which loss is not common between a transformer and rotating machines? A. Eddy current loss B. Copper loss C. Windage loss D. Hysteresis loss

Description : 9 Which loss is not common between a transformer and rotating machines? A. Eddy current loss B. Copper loss C. Windage loss D. Hysteresis loss

Last Answer : A. Eddy current loss

17. Which type of loss is not common to transformer and rotating machines? A. Eddy current loss B. Copper loss C. Hysteresis loss D. Windage loss

Description : 17. Which type of loss is not common to transformer and rotating machines? A. Eddy current loss B. Copper loss C. Hysteresis loss D. Windage loss

Last Answer : D. Windage loss

is universally used for windings of electrical machines because it is easily workable without any possibility of fracture. (a) Silver (b) Steel (c) Aluminium (d) Copper

Description : is universally used for windings of electrical machines because it is easily workable without any possibility of fracture. (a) Silver (b) Steel (c) Aluminium (d) Copper

Last Answer : (d) Copper

Copper, even though costly, finds use in the windings of electrical machines because

Last Answer : Copper, even though costly, finds use in the windings of electrical machines because copper points offer low contact resistance , copper can be easily soldered and welded, copper windings are less bulky and the machines become compact.

Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating each, and short circuiting the two commutator bars C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Description : Temporary repairs to an open DC propulsion armature coil can be made by _____________. A. connecting the coil ends directly to a pair of negative brushes B. disconnecting coil ends, insulating ... C. grounding the coil ends and short circuiting the commutator bar D. removing the sparking brushes

Last Answer : Answer: B

In actual applications, electrical connections to 'R1-R2' of figure 'A' and to 'R1-R2- R3' of figure 'B' shown in the illustration are made by ______________. EL-0092 A. soldered contacts B. spliced and taped connections C. slip rings and brushes D. solderless crimp-on connectors

Description : In actual applications, electrical connections to 'R1-R2' of figure 'A' and to 'R1-R2- R3' of figure 'B' shown in the illustration are made by ______________. EL-0092 A. soldered contacts B. spliced and taped connections C. slip rings and brushes D. solderless crimp-on connectors

Last Answer : Answer: C

Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC

Last Answer : (B) Nylon-66

What are camel haired brushes made of

Description : What are camel haired brushes made of

Last Answer : Squirrels tails

Brushes of DC machine are made up of ?

Description : Brushes of DC machine are made up of ?

Last Answer : Brushes of DC machine are made up of carbon.

What are commutator brushes made of?

Last Answer : Commutator brushes are made up of carbon.

Which of the following metals is used in the electromagnets? (a) Soft iron (b) Stainless steel (c) Cobalt (d) Copper

Description : Which of the following metals is used in the electromagnets? (a) Soft iron (b) Stainless steel (c) Cobalt (d) Copper

Last Answer : Ans:(a)

Which of the following would be most suitable for making an electromagnet? (a) Copper (b) Tungsten (c) Soft iron (d) Steel

Description : Which of the following would be most suitable for making an electromagnet? (a) Copper (b) Tungsten (c) Soft iron (d) Steel

Last Answer : Ans:(c)

State Magneto-striction. Draw Hysteresis loop for : (i) High silicon steel (ii) Copper (iii) Soft iron (iv) Wood

Description : State Magneto-striction. Draw Hysteresis loop for : (i) High silicon steel (ii) Copper (iii) Soft iron (iv) Wood

Last Answer : Magneto-striction: It is the change in dimensions of ferro magnetic material when it is magnetized for eg. Silicon steel, iron or any ferromagnetic material.  i) Hysteresis loop for High silicon steel :  ... loop for Soft iron :  iv) Hysteresis loop for Copper and Wood : 

Hard and fast or soft and slow aka what type of toothbrush should I use?

Description : Hard and fast or soft and slow aka what type of toothbrush should I use?

Last Answer : You should buy soft bristled tooth brushes and brush easy, you don't want to hurt your gums. Also, if you brush too hard you can make your gums recede which will start exposing your roots over time. ... walk around the house or even out on the deck while I brush because I get bored while brushing.

Is this caused by having hard/soft water?

Description : Is this caused by having hard/soft water?

Last Answer : answer:You need to have the water tested (look in yellow pages) for hardness/softness. We have hard water…lots of calcium and other mineral deposits. I need more conditioner for my hair and have to use vinegar occasionally for rings in toilet bowls and bathtubs and in coffee pots and tea kettles.

Do you prefer hard cover or soft when buying books?

Description : Do you prefer hard cover or soft when buying books?

Last Answer : I read in bed alot, so I prefer soft, especially mass-market. (I have small hands) If I doze off while reading a hardcover, I invariably poke myself with a nasty corner. Edit ... paperbacks (slightly larger than mass markets) that never started in hardcover editions that are really marvelous.

How do I get hard bread soft again?

Description : How do I get hard bread soft again?

Last Answer : answer:microwave for about 10–15 sec and im not really sure how long it is supposed to stay soft