When n resistances each of value r are connected in parallel, then ...

When n resistances each of value r are connected in parallel, then resultant resistance is x. When these n resistances are connected in series, total resistance is
by

1 Answer

Answer :

When n resistances each of value r are connected in parallel, then resultant resistance is x. When these n resistances are connected in series, total resistance is n2 x.

by

Related questions

When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel,

Description : When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel, the greatest power is absorbed by • 2 W, 1 W • 5 W, 2 W • 10 W, 5W • 15 W, 10 W

Last Answer : When four resistances of 2W 1W; 5W 2W; 10W 5W and 15W 10 W are connected in parallel, the greatest power is absorbed by 2 W, 1 W

If two resistances of 10 Ω and 10 Ω are connected in parallel the equivalent resistance is _________.

Last Answer : If two resistances of 10 Ω and 10 Ω are connected in parallel the equivalent resistance is 5 Ω.

With three resistances connected in parallel, if each dissipates 20 W the ...

Description :  With three resistances connected in parallel, if each dissipates 20 W the total power supplied by the voltage source equals?

Last Answer : Power is the only thing which is additive in both connection whether it is parallel or series connection so total power consumed will addition of all individual power =20+20+20 = 60 watt

Two resistors of resistances `2Omega` and `6Omega` are connected in parallel. This combination is then connected to a battery of emf 2 V and internal

Description : Two resistors of resistances `2Omega` and `6Omega` are connected in parallel. This combination is then connected to a battery of emf 2 V and internal

Last Answer : Two resistors of resistances `2Omega` and `6Omega` are connected in parallel. This combination is then connected to a ... . `(4)/(17)A` D. `1 A`

If electric resistance is to be decreased, then the number of resistances should be connected in – (1) Series (2) Parallel (3) Mixed arrangement (4) None of these

Description : If electric resistance is to be decreased, then the number of resistances should be connected in – (1) Series (2) Parallel (3) Mixed arrangement (4) None of these

Last Answer : (2) Parallel Explanation: Resistors are in parallel when each resistor is connected directly to the voltage source by connecting wires having riegligible resistance. Each resistor thus has the full voltage ... same full voltage of the source applied to it, but divide the total current amongst them

If electric resistance is to be decreased, then the number of resistances should be connected in _______ (1) Series (2) Parallel (3) Mixed arrangement (4) None of these

Description : If electric resistance is to be decreased, then the number of resistances should be connected in _______ (1) Series (2) Parallel (3) Mixed arrangement (4) None of these

Last Answer : Parallel

Three resistances of 3 Ω each are connected in delta. The value of the resistances in the equivalent star is ...

Description : Three resistances of 3 Ω each are connected in delta. The value of the resistances in the equivalent star is : (A) 27 (B) 9 (C) 1.5 (D) 1 Ω

Last Answer : 9

N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Description : N resistors of each of resistance R when connected in series offer an equivalent resistance of 50 ohm and when reconnected in parallel the effective resistance is 2 ohm the value of R is

Last Answer : 25 ohms

Two cells of emf of 1.5 V and 2.0 V having internal resistances of `1 Omega` and `2 Omega`, respectively are connected in parallel so as to send curre

Description : Two cells of emf of 1.5 V and 2.0 V having internal resistances of `1 Omega` and `2 Omega`, respectively are connected in parallel so as to send curre

Last Answer : Two cells of emf of 1.5 V and 2.0 V having internal resistances of `1 Omega` and `2 Omega` ... of `5 Omega`. Find the current in the external circuit.

Three resistances `2 Omega, 3 Omega` and `4 Omega` are connected in parallel. The ratio of currents passing through them when a potential difference i

Description : Three resistances `2 Omega, 3 Omega` and `4 Omega` are connected in parallel. The ratio of currents passing through them when a potential difference i

Last Answer : Three resistances `2 Omega, 3 Omega` and `4 Omega` are connected in parallel. The ratio of currents passing through them ... ` C. `4:3:2` D. `6:4:3`

If a circuit has resistances of 5, 10, and 20 ohms connected in parallel, what is the combined resistance of the circuit? A. 1.5 ohms B. 2.9 ohms C. 17.5 ohms D. 35.0 ohms

Description : If a circuit has resistances of 5, 10, and 20 ohms connected in parallel, what is the combined resistance of the circuit? A. 1.5 ohms B. 2.9 ohms C. 17.5 ohms D. 35.0 ohms

Last Answer : Answer: B

Three resistances 20 Ω, 30 Ω and 60 Ω are connected in parallel, their combined resistance is given by A. 110 Ω B. 50 Ω C. 20 Ω D. 10 Ω

Description : Three resistances 20 Ω, 30 Ω and 60 Ω are connected in parallel, their combined resistance is given by A. 110 Ω B. 50 Ω C. 20 Ω D. 10 Ω

Last Answer : 10 Ω

A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be – (1) nR (2) R/n (3) n/R (4) R/n²

Description : A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be – (1) nR (2) R/n (3) n/R (4) R/n²

Last Answer : (4) R/n² Explanation: Since R is directly proportional to length of the wire, when wire is cut into equal parts, then Resistance of each part = R/n

A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be

Description : A wire of resistance R is cut into ‘n’ equal parts. These parts are then connected in parallel. The equivalent resistance of the combination will be

Last Answer : R/n2

Two cells connected in series have electromotive force of 1.5 V each. Their internal resistances are `0.5 Omega` and `0.25 Omega` respectively. This c

Description : Two cells connected in series have electromotive force of 1.5 V each. Their internal resistances are `0.5 Omega` and `0.25 Omega` respectively. This c

Last Answer : Two cells connected in series have electromotive force of 1.5 V each. Their internal ... potential differnce across the terminals of each cell.

Given three resistances of `30 Omega` each. How can they be connected to given a total resistance of (i) `90 Omega (ii) 10 Omega (iii) 45 Omega` ?

Description : Given three resistances of `30 Omega` each. How can they be connected to given a total resistance of (i) `90 Omega (ii) 10 Omega (iii) 45 Omega` ?

Last Answer : Given three resistances of `30 Omega` each. How can they be connected to given a total resistance of (i) `90 Omega (ii) 10 Omega (iii) 45 Omega` ?

Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal of the sum of the individual currents. C. The total resistance equals the sum of the individual resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Description : Which of the following statements concerning a simple parallel resistance circuit is correct? A. The voltage drop across each resistor is the same. B. The total current flow equals the reciprocal ... resistances. D. The total voltage equals the sum of the individual voltages across each resistance.

Last Answer : Answer: A

what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Description : what will be the capacitance if three capacitors connected in parallel each having value of 0.5 micro Farad ?

Last Answer : the total capacitace when connected in parallel Tc=total capacitor c1=c2=c3=0.5uf Tc=c1+c2+c3 Tc=1.5uf

A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Description : A resistor of value R/2 is connected in parallel with a resistor of value R/3. The voltage drop across the parallel combination is V. The total current supplied by the voltage source is: w) 2 V/R (read: 2 V over R) x) 3 V/R (read: 3 V over R) y) 4 V/R (read: 4 V over R) z) 5 V/R (read: 5 V over R)

Last Answer : ANSWER: Z -- 5 V/R

How can the resistances of `2Omega, 3 Omega " and " 6 Omega` be connected to give an effective resistance of `4 Omega` ?

Description : How can the resistances of `2Omega, 3 Omega " and " 6 Omega` be connected to give an effective resistance of `4 Omega` ?

Last Answer : How can the resistances of `2Omega, 3 Omega " and " 6 Omega` be connected to give an effective resistance of `4 Omega` ?

Two batteries of emf `epsilon_(1)` and `epsilon_(2) (epsilon_(2)gtepsilon_(1)` and internal resistances `r_(1)` and `r_(2)` respectively are connected

Description : Two batteries of emf `epsilon_(1)` and `epsilon_(2) (epsilon_(2)gtepsilon_(1)` and internal resistances `r_(1)` and `r_(2)` respectively are connected

Last Answer : Two batteries of emf `epsilon_(1)` and `epsilon_(2) (epsilon_(2)gtepsilon_(1)` and internal resistances ... internal resistances `r_(1)` and `r_(2)`

Two resistances are connected in the two gaps of a meter bridge. The balance point is `20 cm` from the zero end. When a resistance `15 Omega` is conne

Description : Two resistances are connected in the two gaps of a meter bridge. The balance point is `20 cm` from the zero end. When a resistance `15 Omega` is conne

Last Answer : Two resistances are connected in the two gaps of a meter bridge. The balance point is `20 cm` from the zero end. ... the value. A. 3 B. 6 C. 9 D. 12

Four resistances are connected in a circuit in the given figure. The electric cirrent flowing through `4 ohm` and `6 ohm` resistance is respectively

Description : Four resistances are connected in a circuit in the given figure. The electric cirrent flowing through `4 ohm` and `6 ohm` resistance is respectively

Last Answer : Four resistances are connected in a circuit in the given figure. The electric cirrent flowing through `4 ohm` and `6 ... 1 A and 1 A D. 2 A and 2 A

Why the input resistance of an ideal OPAMP is infinite and output resistance is zero? secondly, how can we measure these resistances(input and output) in case of an ideal OPAMPand Real OP-AMP in the following conditions when 1- load is not connected. 2- load is connected.

Description : Why the input resistance of an ideal OPAMP is infinite and output resistance is zero? secondly, how can we measure these resistances(input and output) in case of an ideal OPAMPand Real OP-AMP in the following conditions when 1- load is not connected. 2- load is connected.

Last Answer : Ans- Ideal OP-AMP is a power ful concept. If one goes through the history of amplifying devices it becomes clear that less it loads the previous stage better the output signal. ie ... . Can refer application notes by device manufacturer available in internet for more precise and practical solutions.

Two resistances Rl and Ri are connected in series across the voltage...

Description : Two resistances Rl and Ri are connected in series across the voltage source where Rl>Ri. The largest drop will be across?

Last Answer : Two resistances Rl and Ri are connected in series across the voltage source where Rl>Ri. The largest drop will be across Rl.

If an inductance is connected in one arm of bridge and resistances in the remaining three arms?

Last Answer : If an inductance is connected in one arm of bridge and resistances in the remaining three arms the bridge cannot be balanced.

A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega` each. The equivalent resistance is `7 Omega`. Find

Description : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega` each. The equivalent resistance is `7 Omega`. Find

Last Answer : A `5 Omega` resistor is connected in series with a parallel combination of n resistors of `6 Omega ... The equivalent resistance is `7 Omega`. Find n.

Consider a Hamiltonian Graph (G) with no loops and parallel edges. Which of the following is true with respect to this Graph (G) ? (a) deg(v) ≥ n/2 for each vertex of G (b) |E(G)| ≥ 1/2 (n-1)(n-2)+2 edges (c) deg(v) + deg(w) ≥ n for every v and w not connected by an edge (A) (a) and (b) (B) (b) and (c) (C) (a) and (c) (D) (a), (b) and (c)

Description : Consider a Hamiltonian Graph (G) with no loops and parallel edges. Which of the following is true with respect to this Graph (G) ? (a) deg(v) ≥ n/2 for each vertex of G (b) |E(G)| ≥ 1/2 (n-1)(n-2)+2 edges (c) deg(v) + deg( ... edge (A) (a) and (b) (B) (b) and (c) (C) (a) and (c) (D) (a), (b) and (c)

Last Answer : (D) (a), (b) and (c)

You are given two resistances `R_(1)` and `R_(2)`. By using them singly, in series and in parallel, you can obtain four resistances of `1.5Omega, 2Ome

Description : You are given two resistances `R_(1)` and `R_(2)`. By using them singly, in series and in parallel, you can obtain four resistances of `1.5Omega, 2Ome

Last Answer : You are given two resistances `R_(1)` and `R_(2)`. By using them singly, in series and in parallel ... .5Omega` C. `3Omega,5Omega` D. `2Omega, 6Omega`

Two resistances are joined in parallel whose resultant is `6//8 ohm`. One of the resistance wire is broken and the effective resistance becomes `2 Ome

Description : Two resistances are joined in parallel whose resultant is `6//8 ohm`. One of the resistance wire is broken and the effective resistance becomes `2 Ome

Last Answer : Two resistances are joined in parallel whose resultant is `6//8 ohm`. One of the resistance wire is broken and the ... /5` B. 2 C. `6//5` D. 3

The total resistance of a parallel circuit is always ____________. A. larger than that of the branch with the greatest resistance B. smaller than that of the branch with the lowest resistance C. equal to the sum of the individual branch resistances D. equal to the sum of the individual branch resistances divided by the number of branches

Description : The total resistance of a parallel circuit is always ____________. A. larger than that of the branch with the greatest resistance B. smaller than that of the branch with the lowest resistance C ... resistances D. equal to the sum of the individual branch resistances divided by the number of branches

Last Answer : Answer: B

The total resistance of a parallel circuit is always ____________. A. larger than the greatest branch resistance B. smaller than the lowest branch resistance C. equal to the sum of the individual branch resistances D. one-half the sum of the individual branch resistances

Description : The total resistance of a parallel circuit is always ____________. A. larger than the greatest branch resistance B. smaller than the lowest branch resistance C. equal to the sum of the individual branch resistances D. one-half the sum of the individual branch resistances

Last Answer : Answer: B

Heat flux through several resistances in series in analogous to the current flowing through several (A) Resistances in parallel (B) Capacitors in series (C) Resistances in series (D) None of these

Description : Heat flux through several resistances in series in analogous to the current flowing through several (A) Resistances in parallel (B) Capacitors in series (C) Resistances in series (D) None of these

Last Answer : (C) Resistances in series

Series parallel resistances problem solution

Description : Series parallel resistances problem solution

Last Answer : Series parallel resistances problem solution

In a series parallel circuit, any two resistances in the same current path must be in?

Description : In a series parallel circuit, any two resistances in the same current path must be in?

Last Answer : In a series parallel circuit, any two resistances in the same current path must be in series with each other.

There are n cells, each of emf E and internal resistance r, connected in series with an external resistance R. One of the cells is wrongly connected,

Description : There are n cells, each of emf E and internal resistance r, connected in series with an external resistance R. One of the cells is wrongly connected,

Last Answer : There are n cells, each of emf E and internal resistance r, connected in series with an external resistance R. One of the ... D. `((n-2)E)/((n-2)r+R)`

`A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is applied between `x` and `y` the voltme

Description : `A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is applied between `x` and `y` the voltme

Last Answer : `A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is ... )` D. `V_(A)ne V_(B)ne V_(C )`

`A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is applied between `x` and `y` the voltme

Description : `A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is applied between `x` and `y` the voltme

Last Answer : `A, B` and `C` are voltmeters of resistances `R, 1.5R` and `3R` respectively. When some potential difference is ... )gtV_(3)` D. `V_(1)gtV_(2)=V_(3)`

Transformed bacterial cells may display enhanced drug resistances from the acquisition of _____. a. F factors b. M factors c. R factors d. S factors

Description : Transformed bacterial cells may display enhanced drug resistances from the acquisition of _____. a. F factors b. M factors c. R factors d. S factors

Last Answer : c. R factors

Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Description : Four equal resistors are connected in parallel, each resistor has an ohmic value of 100 ohms, what is the equivalent resistance?

Last Answer : 25 ohms

A supply of 24 V DC is applied across a circuit which consist of three resistors connected in parallel R1= 1.2KΩ, R2= 560 Ω, R3= 2.1Ω and a fourth resistor of 7.8 Ω connected in series with the parallel group. Determine the current, voltage and power across each resistor

Last Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]

What is the equivalent resistance of a network having 5 resistors of each 10ohm connected in parallel?

Description : What is the equivalent resistance of a network having 5 resistors of each 10ohm connected in parallel?  (A) 10 Ohms (B) 50 Ohms (C) 500 Ohms (D) 2 Ohms 

Last Answer : D) 2 ohms Solution: 1/Rt = (1/R)(n) 1/Rt = (1/10) (5) 1/Rt = 5/10    Rt = 2 ohms

Four identical resistors are first connected in parallel and then in series. ...

Description : Four identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be

Last Answer : Four identical resistors are first connected in parallel and then in series. The resultant resistance of the first combination to the second will be  1 / 16 times.

If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Description : If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Last Answer : same

Which of the following statements is correct for the illustrated circuit? EL-0020 A. 'R1', 'R2', and 'R3' are connected in series. B. 'R1', 'R2', and 'R3' are connected in parallel. C. The voltages measured across 'R1', 'R2', and 'R3' are equal. D. The total resistance equals 1/R1 + 1/R2 + 1/R

Description : Which of the following statements is correct for the illustrated circuit? EL-0020 A. 'R1', 'R2', and 'R3' are connected in series. B. 'R1', 'R2', and 'R3' are connected in parallel. C. The voltages measured across 'R1', 'R2', and 'R3' are equal. D. The total resistance equals 1/R1 + 1/R2 + 1/R

Last Answer : Answer: A

Six resistance each of value `r=5 Omega` are connected between points A, B and C as shown in figure. If `R_(1), R_(2)` and `R_(3)` are the net resista

Description : Six resistance each of value `r=5 Omega` are connected between points A, B and C as shown in figure. If `R_(1), R_(2)` and `R_(3)` are the net resista

Last Answer : Six resistance each of value `r=5 Omega` are connected between points A, B and C as shown in figure. If `R_(1), R_(2) ... 1:2:3` C. `5:4:3` D. `4:3:2`

Four cells, each of emf E and internal resistance r, are connected in series across an external resistance reverse. Then, the current in the external

Description : Four cells, each of emf E and internal resistance r, are connected in series across an external resistance reverse. Then, the current in the external

Last Answer : Four cells, each of emf E and internal resistance r, are connected in series across an external resistance reverse. Then, ... (3r+R)` D. `(2E)/(3r+R)`

Which of the following instruments can be used for measurement of very high value resistances such as

Description : Which of the following instruments can be used for measurement of very high value resistances such as insulation resistance in industries? A) Wheatstone bridge B) Megger C) Ohm-meter D) Resistive potentiometer 

Last Answer : Which of the following instruments can be used for measurement of very high value resistances such as insulation resistance in industries? A) Wheatstone bridge B) Megger C) Ohm-meter D) Resistive potentiometer