Voltage applied across a ceramic dielectric produces an electrostatic field 100 times greater than in air. The dielectric constant? of the ceramic equals________. 

1 Answer

Answer :

Voltage applied across a ceramic dielectric produces an electrostatic field 100 times greater than in air. The dielectric constant? of the ceramic equals 100.

Related questions

Description : Ionisation potential applied across the electrodes of electrostatic tar precipitator is around (A) 230 V AC (B) 60 KV AC (C) 230 V DC (D) 60 KV DC

Last Answer : (D) 60 KV DC

Description : An electrostatic voltmeter in which an assembly of figure-8-shaped metal plates rotates between the plates of a stationary assembly when a voltage is applied betweeen the assemblies.

Last Answer : Kelvin voltmeter

Description : The permittivity is also called a) Electrostatic energy b) Dielectric constant c) Dipole moment d) Susceptibility

Last Answer : b) Dielectric constant

Description : Ceramic materials possess which of the following properties? a) Brittle and low dielectric constant b) Rigid and low dielectric constant c) Brittle and high dielectric constant d) Rigid and high dielectric constant

Last Answer : c) Brittle and high dielectric constant

Last Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]

Description : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is (A) 70 V (B) 50 V (C) 60 V (D) 100 V

Last Answer : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is 50 V

Description : The electrostatic energy in an electric field does not depend on which of the following? a) Magnitude of charges b) Permittivity c) Applied electric field d) Flux lines

Last Answer : c) Applied electric field

Description : Define breakdown voltage and dielectric strength of a capacitor.

Last Answer : Breakdown Voltage: The voltage at which the dielectric material breaks down (Starts conducting or is no longer remains as an insulator) for a specified thickness, is called its breakdown ... without breaking down (without losing its dielectric property) is called its dielectric strength. 

Description : Define : (i) Dielectric strength (ii) Breakdown voltage

Last Answer : (i) Dielectric strength: The voltage which a dielectric material can withstand without breaking down (without losing its dielectric property) is called its dielectric strength. It is represented by kV/mm ... or is no longer an insulator) for a specified thickness, is its breakdown voltage. 

Description : A voltage of 30 V is applied across a colour coded carbon resistor with first, second and third rings of blue, black and yellow colurs. What is the cu

Last Answer : A voltage of 30 V is applied across a colour coded carbon resistor with first, second and ... What is the current flowing through the resistor ?

Description : In the illustration, 12 volts is applied to the circuit where the resistance of R1 is 10 ohms and R2 is 10 ohms. what is the voltage across R2? EL-0036 A. 1.2 volts B. 2 volts C. 6 volts D. 12 volts

Last Answer : Answer: C

Description : As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 110 ohms, and R2 is 10 kohms what is the voltage measured across R1 EL-0036 A. 11.86 volts B. .131 volts C. 12 volts D. .673 volts

Last Answer : Answer: B

Description : In the illustration, the diode between terminals 16 and 17 is to _________. EL-0046 A. act as a short circuit for the sensing coil when CEMF is applied B. insure that the voltage across the coil does not exceed 9 volts C. improve response time D. act as a filter to prevent hunting

Last Answer : Answer: A

Description : If the line voltage to the controller shown in the illustration is 440 volts, what is applied across the control circuit? EL-0080 A. 110 volts B. 220 volts C. 440 volts D. 660 volts

Last Answer : Answer: C

Description : If the line voltage to the controller shown in the illustration is 440 volts, what voltage is applied across the motor when contacts 'S' close? EL-0080 A. 110 volts B. 220 volts C. 440 volts D. 660 volts

Last Answer : Answer: B

Description : Autotransformer starters or compensators are sometimes used with polyphase induction motors to _____________. A. reduce the voltage applied to the motor during the starting period B. increase the voltage for ' ... to be either stepped up or down, depending on the application, to ensure full torque

Last Answer : Answer: A

Description : An ac voltage is applied across a diode. The tube will conduct when

Last Answer : Positive.

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

Description : A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Last Answer : Answer :

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

Description : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Last Answer : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Description : Electrostatic forces in high voltage circuits cause indicating instruments to give ____________. A. parallax readings B. highly intuitive readings C. highly accurate readings D. inaccurate readings

Last Answer : Answer: D

Description : At approximately what minimum voltage potential should you be able to feel an electrostatic discharge?

Last Answer : 3,500 to 4,000 volts.

Description : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Last Answer : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Description : What is the stored energy when 200 V is applied across a 7 μF capacitor? A) 1400 Joules B) 0.7 Joules C) 0.14 Joules D) None of these

Last Answer : What is the stored energy when 200 V is applied across a 7 μF capacitor? A) 1400 Joules B) 0.7 Joules C) 0.14 Joules D) None of these

Description : In a CRO, the quantity to be measured is applied across  (1) focusing electrodes (2) cathode (3) Y-plates (4) X-plates

Last Answer : C

Description : A megohmmeter is used to measure _____________. A. voltage B. dielectric strength C. current D. power

Last Answer : Answer: B

Description : Dielectric strength of a material is (A) Its energy storage capacity (B) A magnetic property (C) Its capacity to resist the flow of current (D) Its capacity to withstand high voltage

Last Answer : (D) Its capacity to withstand high voltage

Description : For a dielectric which of the following properties hold good? a) They are superconductors at high temperatures b) They are superconductors at low temperatures c) They can never become a superconductor d) They have very less dielectric breakdown voltage

Last Answer : b) They are superconductors at low temperatures

Description : The normal voltage for dielectric heating is (a) 1500 V (b) 11 kV (c) 33 kV (d) 66 kV

Last Answer : 66kv 

Description : The frequencies and voltage used in Dielectric heating are (A) 10 – 30 MHz, upto 25 kV (B) 50 – 60 Hz, upto 25 kV (C) 10 – 30 MHz, upto 100 V (D) 50 – 60 Hz, 110 V – 230 V

Last Answer : The frequencies and voltage used in Dielectric heating are 10 – 30 MHz, upto 25 kV

Description : Energy stored in electrostatic field of capacitance formula

Last Answer : Energy stored in electrostatic field of capacitance formula

Description : Which of the following statements is not valid in case of conductors in electrostatic fields? A) The static electric field intensity inside a conductor is zero B) The static electric field intensity at ... the surface C) The conductor surface is an equivalent potential surface D) None of the above

Last Answer : Which of the following statements is not valid in case of conductors in electrostatic fields? A) The static electric field intensity inside a conductor is zero B) The static electric field intensity at ... the surface C) The conductor surface is an equivalent potential surface D) None of the above

Description : Electrostatic voltmeters are particularly suitable for measuring high voltages because the construction is simplified due to

Last Answer : Electrostatic voltmeters are particularly suitable for measuring high voltages because the construction is simplified due to Large electrostatic forces.

Description : Consider the following statements associated with the basic electrostatic properties of ideal conductors :  1. The resultant field inside is zero. 2. The net charge density in the interior is zero. 3. Any net charges reside on the ... (b) 3, 4 and 5 only (c) 1, 2 and 3 only (d) 2 and 3 only

Last Answer : Consider the following statements associated with the basic electrostatic properties of ideal conductors : 1. The resultant field inside is zero. 2. The net charge density in the interior is zero. 3. Any net charges reside on the ... (b) 3, 4 and 5 only (c) 1, 2 and 3 only (d) 2 and 3 only

Description : A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and frequency are doubled, the new core losses are (A) 140 W (B) 180 W (C) 240 W (D) 480 W

Last Answer : A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and frequency are doubled, the new core losses are 240 W

Description : A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is: (A) 1500 r.p.m. (B) 1425 r.p.m. (C) 25 r.p.m. (D) 75 r.p.m

Last Answer : A balanced three-phase, 50 Hz voltage is applied to a 3 phase, 4 pole, induction motor. When the motor is delivering rated output, the slip is found to be 0.05. The speed of the rotor m.m.f. relative to the rotor structure is: 75 r.p.m

Description : if the rated voltage from the power lines is applied to the primary of a single-phase transformer which is operated on no-load, then

Last Answer : if the rated voltage from the power lines is applied to the primary of a single-phase transformer which is operated on no-load, then input voltage is sinusoidal and input current is non sinusoidal.

Description : Which of the following cells produces a highly stable voltage? A) Weston cell B) Leclanche cell C) Both A and B D) None of these

Last Answer : Which of the following cells produces a highly stable voltage? A) Weston cell B) Leclanche cell C) Both A and B D) None of these

Last Answer : Ceramic capacitor is made up of ceramic material layers where ceramic material is a dielectric material.

Last Answer : Uses of ceramic capacitors is as follows :The ceramic capacitor is use in DC to DC converter.The ceramic capacitor is use with band pass and band stop filter.Ceramic capacitor ... The ceramic capacitor is uses in high frequency circuits.Ceramic capacitors are use for biasing applications.

Last Answer : Ceramic capacitor is a capacitor made up of ceramic material layers and also the dielectric material in ceramic capacitor is ceramic material.

Description : Self induced voltage across an inductance

Last Answer : Self induced voltage across an inductance

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Description : Consider the following statements : 1. The voltage developed across the OFF switches of the half bridge converter is the maximum dc link voltage. 2. In the full bridge converter, the voltage across ... bridge converter is half the maximum dc link voltage. Which of the above statements are correct ?

Last Answer : Consider the following statements : 1. The voltage developed across the OFF switches of the half bridge converter is the maximum dc link voltage. 2. In the full bridge converter, the voltage across the primary of ... dc link voltage. Which of the above statements are correct ? 1 and 2 only

Description : In a series resonant circuit, maximum voltage across L occurs at  (a) Resonant frequency (b) Slightly below resonant frequency (c) Slightly above resonant frequency (d) At a frequency where I is maximum

Last Answer : In a series resonant circuit, maximum voltage across L occurs at Slightly above resonant frequency

Description : The voltage across a coil, when di/dt = 20 mA/s and L = 8 H, is: A. 16 mV B. 160 mV C. 1.6 mV D. 2.5 mV

Last Answer : The voltage across a coil, when di/dt = 20 mA/s and L = 8 H, is: 160 mV

Description : The voltage induced across a certain coil is 200 mV. A 1200 resistor is connected to the coil terminals. The induced current will be: A. 1.7 mA B. 16 mA C. 12 mA D. 120 mA

Last Answer : The voltage induced across a certain coil is 200 mV. A 1200 resistor is connected to the coil terminals. The induced current will be: 1.7 mA

Description : The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a rate of 8 Wb/s is A. 1,000 V B. 2,000 V C.31.25 V D. 3,125 V

Last Answer : The induced voltage across a coil with 250 turns that is located in a magnetic field and is changing at a rate of 8 Wb/s is 2,000 V 

Description : A string of five resistors connected in series is connected across a 6 V battery. Zero voltage is measured across all the resistors except the third resistor. The voltage across the third resistor is: A. 0 V B. 1.2V C. 6V D. 0.6V

Last Answer : A string of five resistors connected in series is connected across a 6 V battery. Zero voltage is measured across all the resistors except the third resistor. The voltage across the third resistor is: 6V