In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to_________.

by

1 Answer

Answer :

In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to limit the acceleration of the motor.

by

Related questions

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

In a closed loop control system ...

Description : In a closed loop control system  (a) control action depends upon the output and also on the input command (b) output signal is fed back to be compared with the reference signal (c) the accuracy is better than in the open loop system (d) all of the above

Last Answer : In a closed loop control system control action depends upon the output and also on the input command , output signal is fed back to be compared with the reference signal , the accuracy is better than in the open loop system. 

In closed loop control system, with positive value of feedback gain the overall gain of the system will

Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will

Last Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.

The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0.

Description : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Last Answer : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

_____is a closed loop system.

Description : _____is a closed loop system.

Last Answer : Auto-pilot for an aircraft is a closed loop system.

What are some examples of a closed loop system?

Description : What are some examples of a closed loop system?

Last Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

Order of the open loop transfer function is_____ to order of closed loop transfer function

Description : Order of the open loop transfer function is _____ to order of closed loop transfer function   (a) not equal (b) equal (c) less than (d) greater than 

Last Answer : Order of the open loop transfer function is equal to order of closed loop transfer function 

After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be

Description : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle criterion alone (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Last Answer : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle ... (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

The open loop control system is one in which _____.

Description : The open loop control system is one in which _____.

Last Answer : the output is independent of output

_____is an open loop control system.

Description : _____is an open loop control system.

Last Answer : Field controlled D.C. motor is an open loop control system.

An automatic toaster is a ______ loop control system.

Description : An automatic toaster is a ______ loop control system.

Last Answer : An automatic toaster is an open loop control system.

In an open loop control system?

Last Answer : In an open loop control system Output is independent of control input.

What are the advantages of open loop control system?

Description : What are the advantages of open loop control system?

Last Answer : Open loop control system are simple to design. Open loop control system are generally stable.

what is open loop and close loop control system?

Description : what is open loop and close loop control system?

Last Answer : A) In open loop system the input is independent         of output but output is depends on input. A-1. no feedback path in open loop s/m    -2. less accuracy than close loop s/m. Ex. Washing ...    -3. high accuracy. Ex. Air conditioner ( AC ), rocket launcher, radar          system, etc

select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

A rout list in form M-53 is issued by______ to_________ a) Divisional Supdt , Postman b) Postmaster , Postmanc) Sub divisional inspector, village postman c) None of these

Description : A rout list in form M-53 is issued by______ to_________ a) Divisional Supdt , Postman b) Postmaster , Postman c) Sub divisional inspector, village postman c) None of these

Last Answer : c) Sub divisional inspector, village postman

________ bind to_________ on microbial invaders. a. Toll-like receptors; PAM Ps b. Mast cells; histamine c. Toll-like receptors; complement d. Macrophages; defensins

Description : ________ bind to_________ on microbial invaders. a. Toll-like receptors; PAM Ps b. Mast cells; histamine c. Toll-like receptors; complement d. Macrophages; defensins

Last Answer : a. Toll-like receptors; PAM Ps

search page engine optimization refers to_________ A.Programming keywords into a website B.each page of a website for design C.amount of links coming into your website D.The number of search engine sites a website Answer: A

Description : search page engine optimization refers to_________ A.Programming keywords into a website B.each page of a website for design C.amount of links coming into your website D.The number of search engine sites a website Answer: A

Last Answer : A.Programming keywords into a website

In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Description : In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Last Answer : c.Closed-loop system

Closed loop and Open loop Control System Advantages and Disadvantages

Description : Closed loop and Open loop Control System Advantages and Disadvantages

Last Answer : Open Loop Control System: Control System in which output quantity has no effect on the input quantity is called Open Loop Control System. Open Loop Control System has no facility to correct automatically the ... in the closed loop system and more care is needed to design a stable closed loop system

With the help of block diagram explain closed loop control CNC system.

Description : With the help of block diagram explain closed loop control CNC system. 

Last Answer : Special motors called servos are used for executing machine movements in closed loop system. The name indicates that the closed loop control system has a loop that is closed as shown in fig. ... to the drive unit and the cycle repeats until there is no error signal from the comparator.

Difference between open loop and closed loop control system

Description : Difference between open loop and closed loop control system

Last Answer : Difference between open loop and closed loop control system : Sr No. Open loop control system Closed loop control system  1 Feedback doesn't exists Feedback exists 2 ... and hence costly 9 Highly affected by nonlinearities Reduced effect of non-linearity

What will happen to the gain margin if the gain of the open loop system is doubled?

Description : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Last Answer : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency

Description : The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency fc = 0.16 Hz. The gain margin (dB) of the system is  (a) 6 (b) 4 (c) 2 (d) 0

Last Answer : The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency fc = 0.16 Hz. The gain margin (dB) of the system is 6

If the gain of the open loop system is doubled, the gain margin

Description : If the gain of the open loop system is doubled, the gain margin  (1) Is not affected (2) Gets doubled (3) Becomes half (4) Becomes one -forth

Last Answer : If the gain of the open loop system is doubled, the gain margin Becomes half

In open loop system

Description : In open loop system

Last Answer : In open loop system the control action is independent of the output.

What is an example of an open loop system?

Description : What is an example of an open loop system?

Last Answer : Open loop system. Ex. Electric heater, washing machine, fan, electric switch, etc

In a control system the output of the controller is given to?

Description : In a control system the output of the controller is given to?

Last Answer : In a control system the output of the controller is given to final control element.

The output of a feedback control system must be a function of?

Description : The output of a feedback control system must be a function of?

Last Answer : The output of a feedback control system must be a function of reference and output.

A control system in which the control action is somehow dependent on the output is known as

Description : A control system in which the control action is somehow dependent on the output is known as?

Last Answer : A control system in which the control action is somehow dependent on the output is known as Closed loop system.

With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Description : With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Last Answer : c.Digitizers may be used as interactive input devices

What is the advantage of using a closed-servo loop to control load velocity?

Description : What is the advantage of using a closed-servo loop to control load velocity?

Last Answer : The closed-servo loop can regulate load speed under changing conditions.

In root locus plot, a point on the real axis lies on the locus, if the number of open loop poles plus zeros on

Description : In root locus plot, a point on the real axis lies on the locus, if the number of open loop poles plus zeros on real axis to the a) left of the point is odd b) left of the point is even . c) right of the pointis odd d) right of the point is even

Last Answer : In root locus plot, a point on the real axis lies on the locus, if the number of open loop poles plus zeros on real axis to the right of the pointis odd

is an open loop control system. (a) Ward Leonard control (b) Field controlled D.C. motor (c) Stroboscope (d) Metadyne

Description : is an open loop control system. (a) Ward Leonard control (b) Field controlled D.C. motor (c) Stroboscope (d) Metadyne

Last Answer : Ans: B

Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Description : Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Last Answer : Ans: C

On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Description : On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Last Answer : Ans: D

What basic requirement of a closed-loop system (not present in open-loops) enables present load position to be sensed?

Description : What basic requirement of a closed-loop system (not present in open-loops) enables present load position to be sensed?

Last Answer : Feedback.

Explain Closed loop and Open loop system with sketch.

Description : Explain Closed loop and Open loop system with sketch. 

Last Answer : Closed Loop System: [1] The name indicates that the closed loop control system has a loop that is closed as shown in figure. [2] A feedback device is used for this purpose. This makes ... system is generally used in point-to-point systems where the accuracy requirements are not critical. 

Describe open loop and closed loop system.

Description : Describe open loop and closed loop system.

Last Answer : Open loop and closed loop system: Open system: When the input is independent of the output, the system is called open- loop system. The control action is based on only some ... system is called closed- loop control system. The output is continuously measured and fed to the input. 

If the characteristics equation of a closed loop system is s2+2s+2=0, then the system is...

Description : If the characteristics equation of a closed loop system is s2+2s+2=0, then the system is  (A) Over damped (B) Critically damped (C) Under damped (D) Undamped 

Last Answer : C. Solving the above character equation gives complex roots -1+i and -1-i. If we plot that roots on real and imaginary axis plane(s-plane), it will be completely on left side of s-plane. So, the oscillations of the above conjugate roots are underdamped and are absolutely stable.

Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is

Description : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is (A) causal & linear (B) non-causal & linear (C) causal & non-linear (D) non-causal & non-linear

Last Answer : Consider a continuous-time system with input x(t) & output y(t) are related by y(t) = x (sin t). This system is non-causal & linear

If a step function is applied to the input of a system and the output...

Description : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is?

Last Answer : If a step function is applied to the input of a system and the output remains below a certain level for all the time, the system is not necessarily stable.

Would this not be a good example of a closed loop paradox?

Description : Would this not be a good example of a closed loop paradox?

Last Answer : No, it’s a disgusting example of a closed loop paradox.

A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y-axis. What is the magnitude of the t

Description : A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y-axis. What is the magnitude of the t

Last Answer : A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y- ... . `(-2Ni_(0)abB_(0)hat(j))/(5)`

A current l flows through a closed loop as shown in figure .The magnetic field at the centre O is

Description : A current l flows through a closed loop as shown in figure .The magnetic field at the centre O is

Last Answer : A current l flows through a closed loop as shown in figure .The magnetic field at the centre O is A. ... )l)/(2piR)(theta+sintheta)` D. None of these

When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Description : When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Last Answer : Conservative forces

G(s) = (1-s)/s(s+2) then closed loop transfer function is a) Unstable b) Stable c) Marginally stable d) All

Description : G(s) = (1-s)/s(s+2) then closed loop transfer function is a) Unstable b) Stable c) Marginally stable d) All

Last Answer : Ans: Stable

What does the term "closed-loop" mean in the closed-loop configuration of an operational amplifier?

Description : What does the term "closed-loop" mean in the closed-loop configuration of an operational amplifier?

Last Answer : The use of degenerative (negative) feed-back

What are the three most common closed-loop capstan drive designs?

Description : What are the three most common closed-loop capstan drive designs?

Last Answer : a. Differential velocity capstans. b. Dual motors dual capstans. c. Peripheral drive capstans.

How do closed-loop capstan drive tape transports overcome the disadvantages of the open-loop drive design?

Description : How do closed-loop capstan drive tape transports overcome the disadvantages of the open-loop drive design?

Last Answer : Closed loop capstan drive transports use more than one capstan to clamp the tape in the area around the magnetic head.