Why is the capacitance ignored in the short transmission line ?

Why is the capacitance ignored in the short transmission line ?
by

1 Answer

Answer :

Capacitance is ignored due to low line length and low line voltage.
by

Related questions

What is the effect of resistance , inductance and capacitance in transmission line ?

Description : What is the effect of resistance , inductance and capacitance in transmission line ?

Last Answer : These 3 factors create voltage drop and power loss of the line. The inductive reactance creates a voltage drop across the line and the capacitance creates a charging current.

What is a short transmission line ?

Description : What is a short transmission line ?

Last Answer : A transmission line that is limited to a length of 50 km and a line voltage of 20 kV is called a short transmission line.

Shunt capacitance is neglected while considering (a) short transmission line (b) medium transmission line (c) long transmission line (d) medium and long transmission lines

Description : Shunt capacitance is neglected while considering (a) short transmission line (b) medium transmission line (c) long transmission line (d) medium and long transmission lines

Last Answer : (a) short transmission line

On what subject does inductance in transmission line depend ?

Description : On what subject does inductance in transmission line depend ?

Last Answer : a) On the line b) Conductor spacing c) Conductor radius

What are the components of power transmission line ?

Description : What are the components of power transmission line ?

Last Answer : ( a) Power Plant , ( b) Conductor Wire , ( c) Transformer , ( d) Line Insulator , ( e) Line Support , ( f) Power Substation , ( g) Circuit Breaker , ( h) Relay , ( I) Isolator , ( j) Lighting Arrester

What type of circuit is the transmission line ?

Description : What type of circuit is the transmission line ?

Last Answer : Answer : The transmission line is a bilateral circuit.

What is a long transmission line ?

Description : What is a long transmission line ?

Last Answer : A transmission line that is more than 150 km long and has a line voltage of more than 100 kV is called a long transmission line.

What is a middle transmission line ?

Description : What is a middle transmission line ?

Last Answer : Transmission line length from 50 km to 150 km and line voltage from 20 kV to 100 kV is called medium transmission line.

How many types of transmission line ?

Description : How many types of transmission line ?

Last Answer : 3 types of transmission line. Namely- 1) Short transmission line , 2) Medium transmission line , 3) Long transmission line.

What is the efficiency of transmission line ?

Description : What is the efficiency of transmission line ?

Last Answer : The ratio of the power of the receiving end of a transmission line to the power of the transmitting end is called the efficiency of the transmission line.

What is the function of damper in transmission line ?

Description : What is the function of damper in transmission line ?

Last Answer : : Using a damper on the transmission line protects the pole from vibration.

In the analysis of which of the following lines shunt capacitance is neglected ? (a) Short transmission lines (b) Medium transmission lines (c) Long transmission lines (d) Medium as well as long transmission lines

Description : In the analysis of which of the following lines shunt capacitance is neglected ? (a) Short transmission lines (b) Medium transmission lines (c) Long transmission lines (d) Medium as well as long transmission lines

Last Answer : (a) Short transmission lines

What is the highest transmission voltage in Bangladesh ?

Description : What is the highest transmission voltage in Bangladesh ?

Last Answer : Bangladesh's highest transmission voltage is 400 kV.

What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Description : What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Last Answer : A. 100x103 m/s

Which of the following determines the characteristics of a transmission line? A. Inductance B. Capacitance C. Physical dimension D. Length

Description : Which of the following determines the characteristics of a transmission line? A. Inductance B. Capacitance C. Physical dimension D. Length

Last Answer : C. Physical dimension

Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Description : Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Last Answer : B. Velocity factor

A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Description : A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Last Answer : Inductance is expressed in micro henrys per unit length, capacitance is expressed in picofarads per unit length, and resistance is expressed in ohms per unit length.

. What are two of the three physical factors that determine the values of capacitance and inductance of a transmission line?

Description : . What are two of the three physical factors that determine the values of capacitance and inductance of a transmission line?

Last Answer : (1) Type of line used, (2) dielectric in the line, and (3) length of line.

effect of inductance and capacitance on performance of transmission line.

Description : effect of inductance and capacitance on performance of transmission line.

Last Answer : Following are the effect on performance of transmission line:  1. Due to inductance (L) voltage drop in transmission line produces.  2. Capacitor (C) draws charging current ... , transmission line efficiency, voltage regulation & also power factor of transmission line gets affected. 

A 800 kV transmission line is having per phase line inductance of 1.1 mH/km and per phase line capacitance

Description : A 800 kV transmission line is having per phase line inductance of 1.1 mH/km and per phase line capacitance of 11.68 nF/km. Ignoring the length of the line, its ideal power transfer capability in MW is (A) 1204 MW (B) 1504 MW (C) 2085 MW (D) 2606 MW

Last Answer : A 800 kV transmission line is having per phase line inductance of 1.1 mH/km and per phase line capacitance of 11.68 nF/km. Ignoring the length of the line, its ideal power transfer capability in MW is 2085 MW

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

Why is the side-side shorted during the short circuit test in the transformer ?

Description : Why is the side-side shorted during the short circuit test in the transformer ?

Last Answer : During this test, any side of the transformer can be shorted, but for the following reasons, the side-side is shorted and 1. Lay-range instruments have the advantage of being connected to the high side ... both windings below 3% of the rated output , so it is convenient to measure on the high side.

What information is available from the short circuit test of the transformer ?

Description : What information is available from the short circuit test of the transformer ?

Last Answer : The following information is available from the short circuit test 1. Equivalent resistance ( R.) . 2. Equivalent Reactance ( X.) . 3. Equivalent impedance ( Z.) 4. Copper loss 5. Skills and Regulation

What is a short circuit test ?

Description : What is a short circuit test ?

Last Answer : Answer : A short circuit test is a test performed by shorting one side of the transformer and supplying a very low voltage of rated voltage with the help of a variant on the other side.

What is the reason why wattmeter indicates only copper loss during transformer short circuit test ?

Description : What is the reason why wattmeter indicates only copper loss during transformer short circuit test ?

Last Answer : Answer : The voltage applied in this test is limited to 5% to 10% of the rated voltage . As a result, much less mutual flux ( Φm) is produced in the core than normal mutual flux. Since ... Φm² , the core loss is practically zero. Thus the whole of the wattmeter reading is considered copper loss.

Why is core loss zero during short circuit test ?

Description : Why is core loss zero during short circuit test ?

Last Answer : The voltage applied by the varicus on the high side is very low , so the mutual flux in the core is also very low. So core loss is zero.

What is a short circuit ?

Description : What is a short circuit ?

Last Answer : Excess electricity flows through a short circuit , which causes heat , sparks, etc. When the voltage drops, the electric pressure increases. That is, voltage is called the pressure of electricity. When the ... do not know the real cause of any kind of electrical fault is called short circuit.

What is a short circuit ? What is meant by short circuit ?

Description : What is a short circuit ? What is meant by short circuit ?

Last Answer : : A short circuit is an electromotive circuit that involuntarily causes abnormal current to flow through the connecting wire. In this case electricity has to overcome very little resistance. As a ... sparks of electricity are created. And if an animal touches this circuit, it gets electrocuted.

Which of the following parameter can be neglected for a short line ? (a) Inductance (b) Capacitance (c) Resistance (d) Reactance

Description : Which of the following parameter can be neglected for a short line ? (a) Inductance (b) Capacitance (c) Resistance (d) Reactance

Last Answer : (b) Capacitance

Which of the following statements is true of Insured Asset Allocation? A. It is aimed at benefiting from short-term under pricing and over pricing of assets. B. In this strategy the risk tolerance of the investor are ignored. C. In this strategy long-term predictions regarding the capital markets are used. D. In this strategy the asset mix is held constant. E. It is a strategy aimed at achieving the objectives of the investor without depending on market timing.

Description : Which of the following statements is true of Insured Asset Allocation? A. It is aimed at benefiting from short-term under pricing and over pricing of assets. B. In this strategy the risk ... . It is a strategy aimed at achieving the objectives of the investor without depending on market timing

Last Answer : E. It is a strategy aimed at achieving the objectives of the investor without depending on market timing.

What is the requirement of cross arm in overhead line ?

Description : What is the requirement of cross arm in overhead line ?

Last Answer : Cross arm steel is made of angle section or wood. Nut-bolts , clamps, etc. are firmly attached to the head of the pole. Cross arm s insulators and conductors carry the wire.

How many types of line support and what are they ?

Description : How many types of line support and what are they ?

Last Answer : Four types of line support. Namely- (a) wooden pole , ( b) steel pole , ( c) concrete pole , ( d) lattice steel pole

Why is line transposition done ?

Description : Why is line transposition done ?

Last Answer : The average inductance value of each line is found to be equal when transposed.

What is a ray line ?

Description : What is a ray line ?

Last Answer : If one end of a segment can be extended as desired by keeping the position of one end point correct , then it is called ray line.

Why is there no fuse in the neutral line ?

Description : Why is there no fuse in the neutral line ?

Last Answer : There will be no benefit if the fuse is in the neutral line. This means that the problem of the fuse is not removed. Cannot protect over voltage or current. Electronics will not be able to protect the device from damage. That is why the neutral fuse is not given to him.

What is the religion of magnetic force line ?

Description : What is the religion of magnetic force line ?

Last Answer : : The religion of magnetic force line: 1. The ball lines are uninterrupted and curved. 2. The force lines travel from the north pole of the magnet to the south pole. 3. The power lines never intersect. ... the pole is high. 5. The lines of force depend on the nature of the medium around the magnet.

Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Description : Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Last Answer : (d) All of the above

Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Description : Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Last Answer : (d) All of the above

When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then

Description : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly   (A) 0.19 (B) 0.81 (C) 0.97 (D) 1.19

Last Answer : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly 0.81

If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Description : If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Last Answer : B. inductance in series

.A(75-j50)-is connectedtoa coaxialtransmission lineofZO=75 ,at 10GHz.The bestmethod ofmatching consistsin connecting a. a short-circuited stub at the load b. an inductance at the load c. a capacitance at some specific distance d. a short-circuited stub at some specific distance from the load

Description : .A(75-j50)-is connectedtoa coaxialtransmission lineofZO=75 ,at 10GHz.The bestmethod ofmatching consistsin connecting a. a short-circuited stub at the load b. an inductance at the load c. a capacitance at some specific distance d. a short-circuited stub at some specific distance from the load

Last Answer : d. a short-circuited stub at some specific distance from the load

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor