What is the effect of resistance , inductance and capacitance in transmission line ?

What is the effect of resistance , inductance and capacitance in transmission line ?
by

1 Answer

Answer :

These 3 factors create voltage drop and power loss of the line. The inductive reactance creates a voltage drop across the line and the capacitance creates a charging current.
by

Related questions

A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Description : A transmission line is said to have distributed constants of inductance, capacitance, and resistance along the line. What units of measurement are used to express these constants?

Last Answer : Inductance is expressed in micro henrys per unit length, capacitance is expressed in picofarads per unit length, and resistance is expressed in ohms per unit length.

effect of inductance and capacitance on performance of transmission line.

Description : effect of inductance and capacitance on performance of transmission line.

Last Answer : Following are the effect on performance of transmission line:  1. Due to inductance (L) voltage drop in transmission line produces.  2. Capacitor (C) draws charging current ... , transmission line efficiency, voltage regulation & also power factor of transmission line gets affected. 

Why is the capacitance ignored in the short transmission line ?

Description : Why is the capacitance ignored in the short transmission line ?

Last Answer : Capacitance is ignored due to low line length and low line voltage.

On what subject does inductance in transmission line depend ?

Description : On what subject does inductance in transmission line depend ?

Last Answer : a) On the line b) Conductor spacing c) Conductor radius

Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Description : Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Last Answer : (d) All of the above

Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Description : Which of the following are the constants of the transmission lines ? (a) Resistance (b) Inductance (c) Capacitance (d) All of the above

Last Answer : (d) All of the above

What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Description : What is the propagation velocity of a signal in a transmission line whose inductance and capacitance are 5μH/m and 20μF/m respectively? A. 100x103 m/s B. 100 m/s C. 10x103 m/s D. 100x106 m/s

Last Answer : A. 100x103 m/s

Which of the following determines the characteristics of a transmission line? A. Inductance B. Capacitance C. Physical dimension D. Length

Description : Which of the following determines the characteristics of a transmission line? A. Inductance B. Capacitance C. Physical dimension D. Length

Last Answer : C. Physical dimension

Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Description : Referred to the dielectric constant of a transmission line material. A. Inductance and capacitance B. Velocity factor C. Characteristic impedance D. Propagation velocity

Last Answer : B. Velocity factor

. What are two of the three physical factors that determine the values of capacitance and inductance of a transmission line?

Description : . What are two of the three physical factors that determine the values of capacitance and inductance of a transmission line?

Last Answer : (1) Type of line used, (2) dielectric in the line, and (3) length of line.

A 800 kV transmission line is having per phase line inductance of 1.1 mH/km and per phase line capacitance

Description : A 800 kV transmission line is having per phase line inductance of 1.1 mH/km and per phase line capacitance of 11.68 nF/km. Ignoring the length of the line, its ideal power transfer capability in MW is (A) 1204 MW (B) 1504 MW (C) 2085 MW (D) 2606 MW

Last Answer : A 800 kV transmission line is having per phase line inductance of 1.1 mH/km and per phase line capacitance of 11.68 nF/km. Ignoring the length of the line, its ideal power transfer capability in MW is 2085 MW

Which of the following parameter can be neglected for a short line ? (a) Inductance (b) Capacitance (c) Resistance (d) Reactance

Description : Which of the following parameter can be neglected for a short line ? (a) Inductance (b) Capacitance (c) Resistance (d) Reactance

Last Answer : (b) Capacitance

'Farad' is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Description : 'Farad' is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : (1) Capacitance Explanation: The Farad is the SI derived unit of capacitance. It is named after the English physicist Michael Faraday.

The fuse in our domestic electric circuit melts when there is a high rise in – (1) Inductance (2) Current (3) Resistance (4) Capacitance

Description : The fuse in our domestic electric circuit melts when there is a high rise in – (1) Inductance (2) Current (3) Resistance (4) Capacitance

Last Answer : (2) Current Explanation: In electronics and electrical engineering, a fuse is a type of low resistance resistor that acts as a sacrificial device to provide over protection, of either the load ... fuse interrupts excessive current (blows) so that further damage by overheating or fire is prevented.

The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Description : The formula for computing impedance in a series circuit containing resistance, capacitance, and inductance is _____________. [ NOTE: the symbol * stands for 'multiplied by' ] A. Z = RT + XL + XC B. Z = R + XL - XC C. Z * Z = R * R + (XL - XC) * (XL - XC) D. Z = R * R + (XL * XC) - (XL * XC)

Last Answer : Answer: C

Capacitance is the property of an electric circuit opposing a change in the _____________. A. current in the circuit B. voltage in the circuit C. inductance in the circuit D. resistance in the circuit

Description : Capacitance is the property of an electric circuit opposing a change in the _____________. A. current in the circuit B. voltage in the circuit C. inductance in the circuit D. resistance in the circuit

Last Answer : Answer: B

AC circuits develop resistance, inductance, and capacitance. The inductive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : AC circuits develop resistance, inductance, and capacitance. The inductive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: D

Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: C

AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

The Wheatstone bridge is a precision measuring instrument utilizing the principle of changes in _____________. A. inductance B. capacitance C. resistance D. amperage

Description : The Wheatstone bridge is a precision measuring instrument utilizing the principle of changes in _____________. A. inductance B. capacitance C. resistance D. amperage

Last Answer : Answer: C

If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Description : If an antenna is too short for the wavelength being used, the effective length can be increased by adding: A. capacitance in series B. inductance in series C. resistance in parallel D. resistance in series

Last Answer : B. inductance in series

A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

The resistance in a magnetic material is called as a) Capacitance b) Inductance c) Reluctance d) Magnetic resistance

Description : The resistance in a magnetic material is called as a) Capacitance b) Inductance c) Reluctance d) Magnetic resistance

Last Answer : c) Reluctance

The magnetostatics highly relies on which property? a) Resistance b) Capacitance c) Inductance d) Moment

Description : The magnetostatics highly relies on which property? a) Resistance b) Capacitance c) Inductance d) Moment

Last Answer : c) Inductance

Hays bridge is used to measure___________ and Schering bridge is used to measure____________ a) Inductance, Inductance b) Inductance, Capacitance c) Capacitance, Inductance d) Resistance, Capacitance

Description : Hays bridge is used to measure___________ and Schering bridge is used to measure____________ a) Inductance, Inductance b) Inductance, Capacitance c) Capacitance, Inductance d) Resistance, Capacitance

Last Answer : Ans: Inductance, Capacitance

An AC bridge that measures inductance in terms of resistance and capacitance.

Description : An AC bridge that measures inductance in terms of resistance and capacitance.

Last Answer : Owen's Bridge

Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Description : Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Last Answer : hay bridge

In AC Circuit Theory, the term that replaces the resistance is: w) inductance x) capacitance y) impedance z) reactance

Description : In AC Circuit Theory, the term that replaces the resistance is: w) inductance x) capacitance y) impedance z) reactance

Last Answer : ANSWER: Y -- IMPEDANCE

‘Farad’ is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Description : ‘Farad’ is the unit of : (1) Capacitance (2) Inductance (3) Resistance (4) Conductance

Last Answer : Capacitance

An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance

Description : An a.c series circuit has resistance of 10ohm, inductance of 0.1H and capacitance of 10µf, voltage applied to circuit is 200V. find (i) Resonant frequency (ii) Current at resonance (iii) Power at resonance 

Last Answer : Solution: For RLC series circuit

Define resistance capacitance & inductance

Last Answer : Resistance: This could be defined as the opposition  or retarding force to the flow of current in a circuit. It is measured in Ohms. Capacitance: The ability of a system of electrical conductors and insulators ... due to a rate of change of current in the circuit or coil. It's unit is Henry.

Capacitance grading of cable implies (a) use of dielectrics of different permeabilities (b) grading according to capacitance of cables per km length (c) cables using single dielectric in different concentrations (d) capacitance required to be introduced at different lengths to counter the effect of inductance (e) none of the above

Description : Capacitance grading of cable implies (a) use of dielectrics of different permeabilities (b) grading according to capacitance of cables per km length (c) cables using single dielectric in different ... introduced at different lengths to counter the effect of inductance (e) none of the above

Last Answer : (a) use of dielectrics of different permeabilities

State the impact of inductance and resistance on transmission line performance

Description : State the impact of inductance and resistance on transmission line performance

Last Answer : Impact of inductance on transmission line: 1) It causes IXL drop in transmission line which affects regulation. 2) It is the only parameter which decides power transmission capacity of line i. ... is very small, it causes losses, temperature rise& poor voltage regulation so it cannot be neglected

If in a short transmission line, resistance and inductance are found to be...

Description : If in a short transmission line, resistance and inductance are found to be equal and regulation appear. to be zero, then the load will?

Last Answer : If in a short transmission line, resistance and inductance are found to be equal and regulation appear. to be zero, then the load will be 0.707 lagging.

What are the components of power transmission line ?

Description : What are the components of power transmission line ?

Last Answer : ( a) Power Plant , ( b) Conductor Wire , ( c) Transformer , ( d) Line Insulator , ( e) Line Support , ( f) Power Substation , ( g) Circuit Breaker , ( h) Relay , ( I) Isolator , ( j) Lighting Arrester

What type of circuit is the transmission line ?

Description : What type of circuit is the transmission line ?

Last Answer : Answer : The transmission line is a bilateral circuit.

What is a long transmission line ?

Description : What is a long transmission line ?

Last Answer : A transmission line that is more than 150 km long and has a line voltage of more than 100 kV is called a long transmission line.

What is a middle transmission line ?

Description : What is a middle transmission line ?

Last Answer : Transmission line length from 50 km to 150 km and line voltage from 20 kV to 100 kV is called medium transmission line.

How many types of transmission line ?

Description : How many types of transmission line ?

Last Answer : 3 types of transmission line. Namely- 1) Short transmission line , 2) Medium transmission line , 3) Long transmission line.

What is a short transmission line ?

Description : What is a short transmission line ?

Last Answer : A transmission line that is limited to a length of 50 km and a line voltage of 20 kV is called a short transmission line.

What is the efficiency of transmission line ?

Description : What is the efficiency of transmission line ?

Last Answer : The ratio of the power of the receiving end of a transmission line to the power of the transmitting end is called the efficiency of the transmission line.

What is the function of damper in transmission line ?

Description : What is the function of damper in transmission line ?

Last Answer : : Using a damper on the transmission line protects the pole from vibration.

What is the effect of resistance and reactance on power factor ?

Description : What is the effect of resistance and reactance on power factor ?

Last Answer : Power factor depends on resistance and reactance. As the resistance of the circuit increases, the phase angle between the current and the voltage decreases, resulting in an increase in the power factor ... current and the voltage increases, resulting in a decrease in the power factor of the circuit.

What effect does increased heat loss have on resistance ?

Description : What effect does increased heat loss have on resistance ?

Last Answer : As the heat decreases, the resistance decreases. Note: In the case of semiconductors, the resistance increases as the heat decreases. As the heat increases, the resistance increases.

Which of the following circuit elements is used to 'block' DC in an electronic circuit? (1) Resistances (2) Capacitance (3) Inductance (4) Diode

Description : Which of the following circuit elements is used to 'block' DC in an electronic circuit? (1) Resistances (2) Capacitance (3) Inductance (4) Diode

Last Answer : (2) Capacitance Explanation: A capacitor (originally known as condenser) is a passive two-terminal electrical component used to store energy in an electric field. Capacitors are widely used ... electric power transmission systems for stabilizing voltage and power flow, and for many other purposes.

The basic control action of a magnetic amplifier depends upon _____________. A. variations in the load capacitance B. changes in inductance C. type of core material D. construction of the core

Description : The basic control action of a magnetic amplifier depends upon _____________. A. variations in the load capacitance B. changes in inductance C. type of core material D. construction of the core

Last Answer : Answer: B

If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its resonant frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Description : If the length of a Hertz dipole is decreased A. its resonant frequency will be lowered its distributed inductance will be increased B. its distributed inductance will be decreased C. its ... frequency will be increased D. its distributed capacitance between the antenna and ground will be increased.

Last Answer : C. its resonant frequency will be increased

What is the velocity factor of coaxial cable with a characteristic impedance of 50Ω and capacitance of 30pF/ft and inductance of 75 nH/ft? A. 0.58 B.0.68 C. 0.98 D. 0.81

Description : What is the velocity factor of coaxial cable with a characteristic impedance of 50Ω and capacitance of 30pF/ft and inductance of 75 nH/ft? A. 0.58 B.0.68 C. 0.98 D. 0.81

Last Answer : B.0.68

Over lap Angle depends on_________ a) Load inductance b) Loa capacitance c) Source inductance d) Source capacitance

Description : Over lap Angle depends on_________ a) Load inductance b) Loa capacitance c) Source inductance d) Source capacitance

Last Answer : Ans: Source inductance