is igbt current controlled device ?

by

1 Answer

Answer :

No, IGBT is not the current controlled device. IGBT is a voltage controlled device. IGBT have combine qualities of MOSFET and BJT. The high switching speed of MOSFET and low conduction losses of BJT. Also, IGBT which stands for Insulated Gate Bipolar Transistor have high input impedance.

by

Related questions

why mosfet is voltage controlled device?

Last Answer : already answered here is mosfet current controlled device?

why thyristor is called semi controlled device?

Last Answer : Thyristor can only be turned on by small gate pulse but it cannot be turn off by using gate hence thyristor is called semi controlled device.

is bjt a voltage controlled device ?

Last Answer : No, BJT is a current controlled device .

MOSFET are current controlled or voltage controlled devices?

Last Answer : MOSFET  are voltage controlled devices.

Is BJT current controlled or voltage controlled?

Last Answer : BJT is current controlled device.

A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms

Description : A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is

Last Answer : Please show the solution for this question

When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a

Description : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is

Last Answer : When the firing angle a of a single-phase, fully controlled rectifier feeding constant direct current into a load is 30°, the displacement power factor of the rectifier is √3/2

why bjt is called current controlled device?

Last Answer : In  BJT  there  is  movement  of   electrons  and  holes   accros  the  junctions  which  is  basicaly  current  flow.

A current controlled voltage source is equivalent to :

Description : A current controlled voltage source is equivalent to :  (A) series voltage feed -back amplifier (B) shunt current feed -back amplifier (C) shunt voltage feed -back amplifier (D) series current feed -back amplifier

Last Answer : A current controlled voltage source is equivalent to : shunt voltage feed -back amplifier

The gravity controlled instrument has crowded scale because current is proportional to?

Last Answer : The gravity controlled instrument has crowded scale because current is proportional to sine of deflection angle.

Describe with neat sketch the constructional details of IGBT.

Description : Describe with neat sketch the constructional details of IGBT.

Last Answer : Construction: Insulated gate bipolar transistor or IGBT, is a solid state devices primarily used as an electronic switch which, as it was developed, came to combine high efficiency and fast ... layer and p+ emitter constitute a BJT with a wide base region and hence small current gain.

Draw construction of IGBT.

Description : Draw construction of IGBT.

Last Answer : construction of IGBT

Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ?

Description : Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown

Last Answer : Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown

Compare BJT, MOSFET and IGBT .

Description : Compare BJT, MOSFET and IGBT .

Last Answer : BJT MOSFET IGBT BJT is a current controlled device. MOSFET is a voltage controlled device. IGBT is a voltage controlled device. The input impedance of BJT is low. ... is minority carrier device. MOSFET is majority carrier device. IGBT is minority carrier device.

why IGBT is preferred as a power switch over both power BJT and MOSFET?

Last Answer : Because it has a higher switching frequency and heat tolerance.

Justify the statement. IGBT uses a vertically oriented structure.

Description : Justify the statements. 1. IGBT uses a vertically oriented structure. 2. IGBT is preferred as a power switch over both power BJT and MOSFET. 3. Punch through IGBT structure are more popular and are widely used.

Last Answer : 1. IGBT uses vertically oriented structure. IGBT use vertically oriented structure to reduce the resistance and to increase the current flow area. Hence IGBT uses vertically oriented ... DC circuit applications. Hence punch through IGBT structure are more popular and are widely used.

explain the parallel operation of IGBT?

Description : Also, highlight the problem faced during parallel operation.

Last Answer : Parallel operation of IGBT: Parallel operation of IGBT is done for obtaining high current rating. Paralleling of IGBT reduces conduction losses and thermal stress. IGBT combines the qualities of ... . IGBTs must share losses equally otherwise IGBT may get failure due to thermal differences.

igbt is unipolar or bipolar?

Last Answer : IGBT is a bipolar device.

why igbt is used in vfd?

Last Answer :  IGBT or Insulated Gate Bi-polar Transistors are typically semiconductor devices aka.  controlled switches,  which find their applications in Power Electronics circuits such as Inverters, and electrical ... ( buy implementing suitable Pulse Width Modulation scheme ) * Lower cost 

why igbt is bipolar?

Last Answer : IGBT is a bipolar device because current is carried by both holes and electrons.

why igbt is used instead of bjt and mosfet?

Last Answer : ON state losses of IGBT is less as compared to MOSFET and BJT.

Give the applications of IGBT

Description : Give the applications of IGBT

Last Answer : 1) AC and DC motor drives 2) SMPS 3) Inverters 4) Choppers 5) Solid-state Relays 6) solid-state Contactors

The number of terminals present in IGBT is

Description : The number of terminals present in IGBT is A) 2 B) 3 C) 4 D) 5

Last Answer : The number of terminals present in IGBT is 3

is IGBT costlier than BJT and MOSFET?

Last Answer : Yes IGBT is costlier than BJT and MOSFET.

State classification of Phase controlled rectifiers.

Description : State classification of Phase controlled rectifiers.

Last Answer : Classification of phase controlled rectifiers:

Single-phase mid-point controlled rectifier with RL load

Description : Single-phase mid-point controlled rectifier with RL load

Last Answer : Single-phase mid-point controlled rectifier with RL load : The circuit configuration of single-phase midpoint controlled rectifier is shown in the figure. During positive half-cycle of ... some part of next positive half-cycle of voltage with reversed polarity can appear across load.

Single-phase Midpoint controlled rectifier with Resistive load

Description : Single-phase Midpoint controlled rectifier with Resistive load

Last Answer : Single-phase Midpoint controlled rectifier with Resistive load:  1) During positive half cycle of AC supply, a is positive with respect to b , this makes T1 forward biased and T2 is reverse ... voltage reverses the polarity and T2 is turned off. The operation is as shown in waveforms.

Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Description : Draw a neat diagram of 1Ф half wave controlled converter with RL load. Give its operation.

Last Answer : Single phase fully controlled half wave converter:  The circuit diagram of single-phase half-wave controlled rectifier with RL load and without freewheeling diode is shown in Fig. (a). The SCR T is ... , when again pulse is applied, the SCR is turned on & the above cycle is repeated. 

A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc

Description : A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is (A) 4.5 V (B) 6.75 V (C) 9 V (D) 13.5 V

Last Answer : A 230 V, 50 Hz phase controlled single-phase full-controlled SCR bridge converter draws 15 A constant dc current. If the source inductance is 3 mH, the drop in dc output voltage is 9 V

The device which allows reverse power flow and withstands highest switch frequency is

Description : The device which allows reverse power flow and withstands highest switch frequency is (A) GTO (B) MOSFET (C) IGBT (D) Inverter grade SCR

Last Answer : The device which allows reverse power flow and withstands highest switch frequency is MOSFET

Application one lamp controlled from two places

Description : Application one lamp controlled from two places

Last Answer : Application one lamp controlled from two places: 1. For Stair case wiring 2. Hospital Wiring ( For operating the lamp in room and nursing station) 3. Bedroom Lighting. 

How are nuclear reactors controlled? Explain two different methods in brief.

Description : How are nuclear reactors controlled? Explain two different methods in brief.

Last Answer : Nuclear reactor is controlled using control rods: Control rods are made up of very high neutron absorbing material like boron, cadmium. By adjusting height of control rods on reactor core ... of nuclear reaction will increase. Whereas by pushing control rod towards the core it will reduce.

The speed of a three-phase induction motor is controlled by variable voltage variable frequency control

Description : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque  (1) Decreases (2) Increases (3) Remains constant (4) None of the above

Last Answer : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque Increases 

In voltage source converter based HVDC transmission system the active power is controlled by changing

Description : In voltage source converter based HVDC transmission system the active power is controlled by changing (A) phase angle of the converter ac input voltage (B) supply frequency of the converter ac input voltage (C) magnitude of the converter ac input voltage (D) DC voltage at the inverter terminals

Last Answer : In voltage source converter based HVDC transmission system the active power is controlled by changing phase angle of the converter ac input voltage

For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Description : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Last Answer : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is 25 x 25

The speed of a locomotive is controlled by?

Last Answer : The speed of a locomotive is controlled by gear box.

Chopper controlled DC motor

Description : Chopper controlled DC motor

Last Answer : Chopper controlled DC motor

fabrication of semiconductor device and describe its need.

Description : State any four materials used in fabrication of semiconductor device and describe its need.

Last Answer : For fabrication of semiconductor devices like transistors diode, solar cell etc. we have to make use of following types of materials  1. Substrate: o It is used for deposition of thin ... . o Metal cans and sealed glass containers satisfy the extreme requirements of space and military users.

Linear and non-linear device

Description : Linear and non-linear device

Last Answer : Linear and non-linear device

Why transistor is called as bipolar device.

Description : Why transistor is called as bipolar device.

Last Answer : BJT is called bipolar device because in BJT current conduction takes place due to majority as well as minority charge carriers that is because of electrons as well as holes.

Which of the following device is used for coupling microwave energy?

Description : Which of the following device is used for coupling microwave energy?  A) Resonator B) Waveguide C) Loop D) Antenna

Last Answer : A

Which of the following is a negative-resistance microwave device for oscillator applications?

Description :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

Last Answer :  Which of the following is a negative-resistance microwave device for oscillator applications? A) IMPATT Diode B) Gunn Diode C) Snap diode D) Schottky Diode 

A snubber circuit is connected to the power semiconductor device to reduce the

Description : A snubber circuit is connected to the power semiconductor device to reduce the (A) turn-on time (B) turn-off time (C) electrical stresses (D) thermal resistance

Last Answer : A snubber circuit is connected to the power semiconductor device to reduce the electrical stresses

Wagner earthing device is used to eliminate errors due to?

Last Answer : Wagner earthing device is used to eliminate errors due to electrostatic coupling.

Basically a potentiometer is a device for?

Last Answer : Basically a potentiometer is a device for comparing two voltages.

which device prevents the oscillation of the moving system and enables the latter to reach its final position quickly?

Last Answer : A damping device prevents the oscillation of the moving system and enables the latter to reach its final position quickly.

A switchgear is device used for?

Last Answer : A switchgear is device used for switching, controlling and protecting the electrical circuit and equipment.

Is FPGA a volatile device?

Description : Is FPGA a volatile device?

Last Answer : Yes, FPGA is a volatile device.

why thyristor is called latching device?

Last Answer : Thyristor can be turn on by positive gate pulse and the current will continue to flow through the device even when the gate voltage is low hence thyristor is called latching device.