Which Interrupt Has The Highest Priority?

1 Answer

Answer :

Answer :TRAP has the highest priority.

Related questions

Description : Explain arbitration. What is priority arbitrator?

Last Answer : Arbitration: IF multiple peripherals are connected to microprocessor or DMA controller or any resource and they request services simultaneously so which peripheral will get serviced first this is ... Peripherals make requests to arbiter and arbiter makes requests to the resource.

Description : Mention The Steps In The Interrupt Driven Mode Of Data Transfer.?

Last Answer : Answer :The steps followed in this type of transfer are as follows: The peripheral device would request for an interrupt. The request acknowledgement for the transfer is issued at the end of ... coordinates by the ISS. Again the Interrupt system is enabled and the above steps are repeated.

Description : What Are Level-triggering Interrupt?

Last Answer : Answer :RST 6.5 & RST 5.5 are level-triggering interrupts

Description : In 8051 which interrupt has highest priority? a)IE1 b)TF0 c)IE0 d)TF1

Last Answer : a)IE1

Description : In 8051 which interrupt has highest priority? a)IE1 b)TF0 c)IE0 d)TF1

Last Answer : c)IE0

Description : Which interrupt has the highest priority? a) INTR b) TRAP c) RST6.5

Last Answer : c) RST6.5

Description : Which of the following 8085 microprocessor hardware interrupt has the lowest priority? (A) RST 6.5 (B) RST 7.5 (C) TRAP (D) INTR 

Last Answer : Answer: D

Description : Where can I watch the current Olympics online internationally (as in, not in the US)? Highest priority: watching figure skating events in full after they happen.

Last Answer : I am not sure if its legal, as I have never used it, but channelsurfing.net seems like the big thing right now.

Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Last Answer : a) NMI

Description : A project manager has been transferred to a major software development project that is in the implementation phase. The highest priority for this projectmanager should be to A. Establish a relationship with ... the manager' s management style D. Ensure that the project proceeds at its current pace

Last Answer : B. Learn the project objectives and the existing project plan

Description : The three outputs x1x2x3 from the 8x3 priority encoder are used to provide a vector address of the form 101x1x2x300. What is the second highest priority vector address in hexadecimal if the vector addresses are starting from the one with the highest priority? (A) BC (B) A4 (C) BD (D) AC

Last Answer : Answer: B

Description : What is an interrupt in Arduino?

Last Answer : An interrupt in Arduino is a signal that interrupts the normal execution of a program and causes the microcontroller to execute a specific function or routine.

Description : What is an interrupt in Arduino?

Last Answer : An interrupt in Arduino is a signal that temporarily stops the execution of the main program to perform a specific task, such as reading data from a sensor.

Description : Is there a way to Interrupt startup programs at startup rather than removing them from the folder previously?

Last Answer : Start in safe mode. That’s about it as far as I know.

Description : If you see your college aged kid making some really dumb choices, how long before you interrupt and try to set him straight?

Last Answer : You think his friends are bad people because they’re not in school? Seriously? Is that the issue..?

Description : Has anyone here applied the phrase "don't interrupt your enemy when he's making a mistake"? And how much their mistake escalated by letting them continue?

Last Answer : My bully came and asked me to look at his project I saw he did all of it wrong I decided since he was a asshole to me I would let him fail the project he did his grades kept spiraling out of ... take him for his previous acts and grades I haven't checked up on him sense (note karma is a bitch)

Description : Has anyone here applied the phrase "don't interrupt your enemy when he's making a mistake"? And how much their mistake escalated by letting them continue?

Last Answer : My bully came and asked me to look at his project I saw he did all of it wrong I decided since he was a asshole to me I would let him fail the project he did his grades kept spiraling out of ... take him for his previous acts and grades I haven't checked up on him sense (note karma is a bitch)

Description : Has anyone here applied the phrase "don't interrupt your enemy when he's making a mistake"? And how much their mistake escalated by letting them continue?

Last Answer : My bully came and asked me to look at his project I saw he did all of it wrong I decided since he was a asshole to me I would let him fail the project he did his grades kept spiraling out of ... take him for his previous acts and grades I haven't checked up on him sense (note karma is a bitch)

Description : Has anyone here applied the phrase "don't interrupt your enemy when he's making a mistake"? And how much their mistake escalated by letting them continue?

Last Answer : My bully came and asked me to look at his project I saw he did all of it wrong I decided since he was a asshole to me I would let him fail the project he did his grades kept spiraling out of ... take him for his previous acts and grades I haven't checked up on him sense (note karma is a bitch)

Description : Has anyone here applied the phrase "don't interrupt your enemy when he's making a mistake"? And how much their mistake escalated by letting them continue?

Last Answer : My bully came and asked me to look at his project I saw he did all of it wrong I decided since he was a asshole to me I would let him fail the project he did his grades kept spiraling out of ... take him for his previous acts and grades I haven't checked up on him sense (note karma is a bitch)

Description : Has anyone here applied the phrase "don't interrupt your enemy when he's making a mistake"? And how much their mistake escalated by letting them continue?

Last Answer : My bully came and asked me to look at his project I saw he did all of it wrong I decided since he was a asshole to me I would let him fail the project he did his grades kept spiraling out of ... take him for his previous acts and grades I haven't checked up on him sense (note karma is a bitch)

Description : Has anyone here applied the phrase "don't interrupt your enemy when he's making a mistake"? And how much their mistake escalated by letting them continue?

Last Answer : My bully came and asked me to look at his project I saw he did all of it wrong I decided since he was a asshole to me I would let him fail the project he did his grades kept spiraling out of ... take him for his previous acts and grades I haven't checked up on him sense (note karma is a bitch)

Description : I have a tourist visa in the USA I pay taxes in cr as an entrepreneur how can I pay taxes when I'm not working?

Last Answer : You should have suspended the trade.

Description : Why interrupt masking is needed of microprocessor?

Last Answer : Need answer

Description : What is a good sentence for the word interrupt?

Last Answer : What is the answer ?

Description : What is the difference between interrupt and system call?

Last Answer : A processor executes its instructions one after another. One of the instructions it can execute is a subroutine call, where it suspends executing the current set of instructions, goes off and executes another ... Interrupts are asynchronous, they can occur at any time, such as when you hit a key

Description : A special request originated from some device to the CPU to acquire some of its time is called ___________ a) Disturbance b) Attenuation c) Interrupt d) Noise

Last Answer : Answer: c Explanation: An interrupt is a kind of request which takes control of the system bus for some time, then performs all the operations and gives back control to the CPU. It is usually identified by some number and is handled by the interrupt controller

Description : An interrupt can be temporarily ignored by the counter is called _______ A. Maskable Interrupt B. Non-maskable Interrupt C. vectored Interrupt D. None of the Above

Last Answer : A. Maskable Interrupt

Description : In an emergency, the fastest way to interrupt power and stop the winch shown in the illustration is for the ____________. EL-0102 A. mate to open the disconnect switch at 'L1' and 'L2' B. ... watch engineer to open the winch circuit breaker D. electrician to open the test link at the controller

Last Answer : Answer: B

Description : What is meant by interrupt?

Last Answer : Interrupt is an external signal that causes a microprocessor to jump to a specific subroutine.

Description : List the four instructions which control the interrupt structure of the 8085 microprocessor.

Last Answer : • DI ( Disable Interrupts ) • EI ( Enable Interrupts ) • RIM ( Read Interrupt Masks ) • SIM ( Set Interrupt Masks )

Description : It contains the stack for PC storage during subroutine calls and input/output interrupt services: a. Seven- level hardware b. Eight- level hardware

Last Answer : b. Eight- level hardware

Description : is an external hardware event which causes the CPU to interrupt the current instruction sequence: a. Input interrupt b. Output interrupt c. Both d. None of these

Last Answer : c. Both

Description : Which interrupt services save all the register and flags. a. Save interrupt b. Input/output interrupt c. Service interrupt d. All of these

Last Answer : b. Input/output interrupt

Description : IRET stand for. a. Interrupt enter b. Interrupt return c. Interrupt delete d. None of these

Last Answer : b. Interrupt return

Description : Which are benefit of input/output interrupt: a. It is an external analogy to exceptions b. The processor initiates and perform all I/O operation c. The data is transferred into the memory through interrupt handler d. = Alllof these

Last Answer : d. = Alllof these

Description : Which are the not causes of the interrupt: a. In any single device b. In processor poll devices c. Itis an external analogy to exception d. None of these

Last Answer : c. Itis an external analogy to exception

Description : Which are the causes of the interrupt: a. In any single device b. In processor poll devices c. In a device whose ID number is stored on the address bus d. Allof these

Last Answer : d. Allof these

Description : Which are the functioning of I/O interrupt: a. The processor organizes all the I/O operation for smooth functioning b. After completing the I/O operation the device interrupt the processor c. Both d. None of these

Last Answer : b. After completing the I/O operation the device interrupt the processor

Description : which of the following is interrupt mode. a. Task mode b. Executive mode c. Botha &b d. None of these

Last Answer : b. Executive mode

Description : To overcome the lag in the operating speeds of the I/O device and the processor we use ___________ a) BUffer spaces b) Status flags c) Interrupt signals d) Exceptions

Last Answer : Status flags

Description : The system is notified of a read or write operation by ___________ a) Appending an extra bit of the address b) Enabling the read or write bits of the devices c) Raising an appropriate interrupt signal d) Sending a special signal along the BUS

Last Answer : Sending a special signal along the BUS

Description : Serial port interrupt is generated, if ____ bits are seta) IE b) RI, IE c) IP, TI d) RI, TI

Last Answer : d) RI, TI

Description : The external device is connected to a pin called the ______ pin on the processor chip. a. Interrupt b. Transfer c. Both d. None of these

Last Answer : a. Interrupt

Description : Which are the flags of status register: a. Over flow flag b. Carry flag c. Half carry flag d. Zero flag e. Interrupt flag f. Negative flag g. All of these

Last Answer : g. All of these

Description : The interrupt vector table of 80386 has been allocated ______ space starting from _______ to _______. a) 1Kbyte, 00000H, 003FFH b) 2Kbyte, 10000H, 004FFH c) 3Kbyte, 01000H, 007FFH d) 4Kbyte, 01000H, 009FFH

Last Answer : c) 3Kbyte, 01000H, 007FFH

Description : Serial port vector address is of _______. And causes an interrupt when ________. a) 0013H, either TI or RI flag is set b) 0023H, either TI or RI flag is reset c) 0013H, either TI or RI flag is reset d) 0023H, either TI or RI flag is set

Last Answer : a) 0013H, either TI or RI flag is set

Description : In 8051 an external interrupt 1 vector address is of ________ and causes of interrupt if ____. a) 000BH, a high to low transition on pin INT1 b) 001BH, a low to high transition on pin INT1 c) 0013H, a high to low transition on pin INT1 d) 0023H, a low to high transition on pin INT1

Last Answer : a) 000BH, a high to low transition on pin INT1

Description : In 8096 we have _____interrupt sources and _______ interrupt vectors. a) 18, 8 b) 21, 6 c) 21, 8 d) 16, 8

Last Answer : c) 21, 8