Mention The Steps In The Interrupt Driven Mode Of Data Transfer.?

Mention The Steps In The Interrupt Driven Mode Of Data Transfer.?
by

1 Answer

Answer :

Answer :The steps followed in this type of transfer are as follows:
The peripheral device would request for an interrupt.
The request acknowledgement for the transfer is issued at the end of instruction execution.
Now the ISS routine is initialized, The PC has the return address which is now stored in the stack.Now data transfer is managed and coordinates by the ISS.
Again the Interrupt system is enabled and the above steps are repeated.
by

Related questions

Explain data transfer mechanism in I2C protocol.

Description : Explain data transfer mechanism in I2C protocol. Compare it with CAN and USB protocol based on bit rate and area of applications.

Last Answer : I2C (Inter-Integrated Circuit): I2C stands for Inter-Integrated Circuit. I2C is a serial protocol. It was developed by Philips Semiconductor. I2C bus have two communication lines. One is serial data ( ... Mbps this is used for lower speed devices. Using USB we can connect upto 127 devices.

What Are Level-triggering Interrupt?

Description : What Are Level-triggering Interrupt?

Last Answer : Answer :RST 6.5 & RST 5.5 are level-triggering interrupts

Which Interrupt Has The Highest Priority?

Description : Which Interrupt Has The Highest Priority?

Last Answer : Answer :TRAP has the highest priority.

Compare characteristics of asynchronous and synchronous transmission mode.

Description : Compare characteristics of asynchronous and synchronous transmission mode (four points). 

Last Answer : Synchronous transmission Asynchronous transmission 1. Synchronous transmission are synchronized by an external clock. 1. Asynchronous transmission are synchronized by special signals along the transmission ... for transferring a small amount of data as it is simple and economical.

A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input

Description : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is :

Last Answer : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is : 200 V

The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at

Description : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of (A) 1.5V (B) 2.5V (C) 3.5V (D) 4.5V

Last Answer : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of 2.5V

Describe the basic SHA operation with the help of its four mode specifications.

Description : Describe the basic SHA operation with the help of its four mode specifications.

Last Answer : Sample-and-hold amplifier (SHA) is a unity gain amplifier with a mode control switch where the input of the amplifier is connected to a time-varying signal. A trigger pulse at the mode control switch ... but other forms, such as optical and mechanical forms, are possible. Also denoted S/H.

What are the disadvantages of linear regulator ?

Description : What are the disadvantages of the linear regulator? how are they overcome in the switching regulator? What is continuous and discontinuous mode switching regulator?

Last Answer : Disadvantages of the linear regulator: Linear regulator waste power in the form of heat. Linear regulator has very low efficiency. Linear regulator cannot be used for the step ... between continuous mode and discontinuous mode switching regulator.

Mention The Different Types Of Data Transfers Possible In The 8085.?

Description : Mention The Different Types Of Data Transfers Possible In The 8085.?

Last Answer : Answer :The various types of data transfer operations possible are: Data transfer is possible between two registers. It is also possible between a memory location and a register. Also it can occur between ... . In reality data is never transferred it can only be copied from one location to another.

What program will allow me to burn DVDs (or CDs) in batch mode?

Description : What program will allow me to burn DVDs (or CDs) in batch mode?

Last Answer : Well, I actually answer this time seeing as that I forgot to post it last time round. What I was going to say, surely it's cheaper and much more efficient to buy an external HDD and backup onto that surely ... for a long while may turn something up, I'll see what I can find if anything at all :S

How to Write a Job Transfer Request ?

Description : How to Write a Job Transfer Request ?

Last Answer : How to Write a Job Transfer Request No matter which type of industry you are in, there may come a point in your career when you would not want to settle for the current position that you have at ... push that your boss needs to finally take notice of the work that you have been doing in the past.

Heat Transfer Software

Description : Heat Transfer Software

Last Answer : The process of heat transfer is used in many industries - the scientific industry, engineering industry and every industry you can possibly think of that uses thermal heat. Because of this, there is a need ... group, so you won't have to go through the hassle of copying information down for others.

Heat Transfer Machines

Description : Heat Transfer Machines

Last Answer : Heat transfer machines are just the thing you need in order to do heat transfers on your clothing or whatever surface you want to decorate. In order for you to stick designs and precious stones on porous and ... is best. This will also give you an idea of what kind of designs you can choose from.

Heat Transfer Experiments

Description : Heat Transfer Experiments

Last Answer : Heat transfer experiments are basically experiments that deal with temperature, its characteristics and qualities. Heat transfer experiments are done for many purposes, but mainly to do investigations on the ... three are learned, it helps to have a better understanding of heat transfers as well.

Fuel Transfer Pumps

Description : Fuel Transfer Pumps

Last Answer : A fuel transfer pump is used to move fuel from one container to another. These pumps are used to fuel cars, planes, agricultural equipment and other devices. They are typically used to transfer diesel and ... for quicker fueling. These models may cost more, but they will make your job a lot easier.

How to transfer an apartment to a non-residential fund?

Description : How to transfer an apartment to a non-residential fund?

Last Answer : Can a private entrepreneur use his apartment as an office? The answer to this question depends on the type of activity. To sew, write poetry, fill out accounting documents, engage in tutoring, write ... is unacceptable. If you are not satisfied with this decision, you can appeal it in court.

Calculate the rate of heat transfer by radiation from an unlagged steam pipe, 50 mm o.d. at 393K to air at 293K emissivity e = 0.9.

Description : Calculate the rate of heat transfer by radiation from an unlagged steam pipe, 50 mm o.d. at 393K to air at 293K emissivity e = 0.9.

Last Answer : Rate of heat transfer by radiation Assume length of pipe = 1 m

Give the unit of overall heat transfer coefficient in SI and MKS.

Description : Give the unit of overall heat transfer coefficient in SI and MKS.

Last Answer : Unit of overall heat transfer coefficient 1. In SI : W/m2K 2. In MKS : kcal/hr m2K

Define film heat transfer coefficient.

Description : Define film heat transfer coefficient.

Last Answer : Film heat transfer coefficient: Film heat transfer coefficient h is defined as the quantity of heat transferred in unit time through unit area at a temperature difference of 10 between the surface and surrounding.

Define steady state heat transfer.

Description : Define steady state heat transfer.

Last Answer : Steady state heat transfer: Heat transfer where temperature remains same with respect to time and the rate of heat transfer does not vary with time.

Transfer switch

Description : Transfer switch

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Maximum Power Transfer Theorem 1

Description : Maximum Power Transfer Theorem 1

Last Answer : Maximum Power Transfer Theorem 1

State maximum power transfer theorem for DC circuit.

Description : State maximum power transfer theorem for DC circuit.

Last Answer : Maximum power transfer theorem for DC circuit: The maximum power transfer theorem states that the source or a network transfers maximum power to load only when the load resistance is equal ... removed (disconnected) ii) All internal independent sources are replaced by their internal resistances.

_______ electric power is the most common method used by electrical grids to transfer power.

Description : _______ electric power is the most common method used by electrical grids to transfer power.  (A) One-phase (B) Two-phase (C) Three-phase (D) None of the above

Last Answer : Three-phase electric power is the most common method used by electrical grids to transfer power. 

A transfer function has a second order denominator and constant gain in the numerator

Description : A transfer function has a second order denominator and constant gain in the numerator

Last Answer : A transfer function has a second order denominator and constant gain in the numerator the system has two zeros at infinity

The transfer of energy for reaction turbines is based on _______

Description : The transfer of energy for reaction turbines is based on _______ A) Newton’s first law B) Newton’s second law C) Newton’s third law D) All the above

Last Answer : The transfer of energy for reaction turbines is based on Newton’s third law

The reactive power transfer over a line mainly depends on

Description : The reactive power transfer over a line mainly depends on

Last Answer : The reactive power transfer over a line mainly depends on lVsl- lVRl

With the knowledge of the state variable representation of a plant the transfer function of the plant

Description : With the knowledge of the state variable representation of a plant the transfer function of the plant 

Last Answer : With the knowledge of the state variable representation of a plant the transfer function of the plant can be determined completely

For maximum transfer of power, internal resistance of the source should be?

Description : For maximum transfer of power, internal resistance of the source should be?

Last Answer : For maximum transfer of power, internal resistance of the source should be equal to load resistance.

For high efficiency of transfer of power, internal resistance of the source should be?

Description : For high efficiency of transfer of power, internal resistance of the source should be?

Last Answer : For high efficiency of transfer of power, internal resistance of the source should be less than the load resistance.

Where can I find a list of data connections?

Description : Where can I find a list of data connections?

Last Answer : I’m unclear on your question. Are you trying to find the technical specifications for these things? If so, I’d start with google vga technical specification to get something you can start to work with.

Is there any data on costs/losses associated with non payers in the health care system?

Description : Is there any data on costs/losses associated with non payers in the health care system?

Last Answer : In the medical literature there are lots of articles that try to quantify the cost associated with non payers in the US health care system. Unfortunately it comes down to interpretation of statistics ... sense of other peoples statistics. Anyhoo have a look at this article from Health Affairs 2008.

How can I recover data from my deleted Facebook account?

Description : How can I recover data from my deleted Facebook account?

Last Answer : answer:Download your information This does require that your facebook account be active, though. They do maintain your data for at least 30 days, so if it hasn't been that long since you deleted your ... 're not going to get things like usage/marketing data on you or other statistical data on you.

Would it be at all possible to recover data of a deleted Facebook profile?

Description : Would it be at all possible to recover data of a deleted Facebook profile?

Last Answer : If you reinstate your account it should just bring (most) of it back up, instantly.

What is your data backup system?

Description : What is your data backup system?

Last Answer : answer:My mom uses Carbonite, which I believe just came in very handy after she got a virus and lost the contents of her hard drive. I have not used it personally, though, so I can't speak for it. Myself ... ago and had to wipe my HD. Thank god I had that 150 gig external drive to save all my stuff!

Is 100mb a good data plan for 19.99 on AT&T?

Description : Is 100mb a good data plan for 19.99 on AT&T?

Last Answer : No because 30 a month will get you unlimitted data. Some phones are actually only 20 a month like the first iPhone.

What exactly is push data, and what does it push?

Description : What exactly is push data, and what does it push?

Last Answer : I think you're right. Push data transfers automatically to your phone. If you have an iPhone and a MobileMe account, calender and contact info that you update on your desktop are automatically sent to your ... to launch the mobile app, like Mail or Calender, and have it ask the server for updates.

What are the hydraulic data required for designing a pump capacity?

Description : What are the hydraulic data required for designing a pump capacity?

Last Answer : Ans: Following are the hydraulic data required for designing the pump capacity a. The depth of the Bore or well (suction height/ below ground level) b. The delivery light. c. The yield of the Borewell. d. The horizontal distance of the pumping from bore well where planned to deliver.

Find out number of data lines required to interface 16 LEDs arrange in the 4 x 4 matrix form.

Description : Find out number of data lines required to interface 16 LEDs arrange in the 4 x 4 matrix form.

Last Answer : 4+4=8, eight lines are required for 4x4 matrix of 16 LEDs

Data logger and its application

Description : Data logger and its application

Last Answer : Data logger and its application:- A data logger or data recorder is an electronic device that records data over time or in relation to location either with a built in instrument or sensor ... Testing (including crash testing) 8) Motor Racing 9) Monitoring of relay status in railway signalling.

What is the need of data converters? List specifications of DAC.

Description : What is the need of data converters? List specifications of DAC.

Last Answer : Need of data converters:  It is often necessary that before processing the analog data, by a digital system, it should be changed to an equivalent digital form. Similarly, after processing the data, it ... 4. Temperature sensitivity 5. Settling time 6. Speed 7. Long term Drift 8. Supply rejection

Calculate the size of memory address space for a 16 bit data and 20 bit address bus.

Description : Calculate the size of memory address space for a 16 bit data and 20 bit address bus. A) 1 MB B) 2 MB C) 3 MB D) 4 MB

Last Answer : Calculate the size of memory address space for a 16 bit data and 20 bit address bus. A) 1 MB B) 2 MB C) 3 MB D) 4 MB

Which unit holds data permanently?

Description : Which unit holds data permanently?  (A) Input unit (B) Secondary storage unit (C) Output Unit (D) Primary Memory Unit

Last Answer : Which unit holds data permanently?  (A) Input unit (B) Secondary storage unit (C) Output Unit (D) Primary Memory Unit

Which of the following is the product of data processing:

Description : Which of the following is the product of data processing:  (A) Information (B) Data (C) Software programme (D) System

Last Answer : Which of the following is the product of data processing: Information 

What is Data Acquisition System (DAS) ?

Description : What is Data Acquisition System (DAS) ?

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Explain with reason through which side of shell and tube heat exchanges, the following liquids are directed. (i) viscous liquid (ii) high pressure liquid (iii) corrosive liquid

Description : Explain with reason through which side of shell and tube heat exchanges, the following liquids are directed. (i) viscous liquid (ii) high pressure liquid (iii) corrosive liquid

Last Answer : Viscous liquid : Viscous liquid is passed through shell side Reason: because of the presence of baffles in the shell induce turbulence and hence increases heat transfer rate. High pressure liquid: High ... To avoid expensive alloy shells (in order to save the cost of expensive material for shell).

With neat sketch explain the construction and working of heat exchanger used for handling corrosive liquid.

Description : With neat sketch explain the construction and working of heat exchanger used for handling corrosive liquid.

Last Answer : Graphite block heat exchanger:   Graphite heat exchangers are well suited for handling corrosive fluids. Graphite is inert towards most corrosive fluids and has very high thermal conductivity. Graphite being ... vertical faces direct the service fluid through the exchanger in a cross flow.

Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Description : Explain the type of multiple effect evaporator feed arrangement used for handling viscous liquid.

Last Answer : Backward feed arrangement  If the liquid is very viscous, then we have to adopt backward feed arrangement. In this arrangement, the feed solution and vapour flow is in opposite direction. Fresh feed is ... Not very common as it need pump. At low values of feed temperature higher economy.

Explain Wilson plot.

Description : Explain Wilson plot.

Last Answer : Wilson Plot: The Wilson plot method was developed by Wilson in 1915 to evaluate the convection coefficients in shell and tube condensers for the case of a vapour condensing outside by means of ... resistance and the remaining thermal resistances participating in the heat transfer process.

Explain Kirchhoff’s Law with its mathematical expression in detail.

Description : Explain Kirchhoff’s Law with its mathematical expression in detail.

Last Answer : Kirchoff's law of radiation: Kirchoff's law: It states that at equilibrium temperature, the ratio of total emissive power of any body to absorptivity depends only upon the temperature of the body. ... respectively. At thermal equilibrium, absorption and emission rates are equal, thus,