What Are The Two Major Differences Between Intr And Other Interrupts ( Hardware)?

What Are The Two Major Differences Between Intr And Other Interrupts ( Hardware)?
by

1 Answer

Answer :

Answer :The two major differences between INTR and the other hardware interrupts are as follows:All the hardware interrupts are vectored interrupts but the INTR interrupt is not so. An INTR interrupt will always get the address of a subroutine from the device ( external ) itself. In the case of other hardware interrupts the interrupts come from the call generated by the processor at a already determined vector location.
In case of the INTR interrupt the return address of an interrupt is never saved but in the case of other hardware interrupts the locations is saved in the stack.
by

Related questions

What Are Hardware Interrupts?

Description : What Are Hardware Interrupts?

Last Answer : Answer :TRAP, RST7.5, RST6.5, RST5.5, INTR.

Explain Briefly What Happens When The Intr Signal Goes High In The 8085?

Description : Explain Briefly What Happens When The Intr Signal Goes High In The 8085?

Last Answer : Answer :The INTR is a maskable interrupt for the 8085. It has the lowest priority and is also non vectored. When this INTR signal goes into the high state the following things occur / ... the processor saves the address of new instruction into the STACK and an interrupt service subroutine begins.

Classify Interrupts On The Basis Of Signals. State Their Differences.?

Description : Classify Interrupts On The Basis Of Signals. State Their Differences.?

Last Answer : Answer :On the basis of level the signals can be classified into the following types: Single level interrupts Multi level interrupts The differences between them are as follows: For single the ... multi level it is not necessary. Single level interrupts are much slower than multi level interrupts.

How Many Interrupts Are There In 8085?

Description : How Many Interrupts Are There In 8085?

Last Answer : Answer :There are 12 interrupts in 8085.

What Are Software Interrupts?

Description : What Are Software Interrupts?

Last Answer : Answer :RST0, RST1, RST2, RST3, RST4, RST5, RST6, RST7.

In What Way Interrupts Are Classified In 8085?

Description : In What Way Interrupts Are Classified In 8085?

Last Answer : Answer :In 8085 the interrupts are classified as Hardware and Software interrupts.

Fun Things you Can Do with Old Computer Hardware

Description : Fun Things you Can Do with Old Computer Hardware

Last Answer : Computers can get outdated in a matter of years or even just a few months. If you are the type of person who has that upgrade itch inside you, then you probably have a lot of old computer ... Feel free to experiment around by using your creativity. Feel free to suggest other stuff you can do too.

The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Last Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Which of the following is hardware interrupts? a) RST5.5, RST6.5, RST7.5 b) INTR, TRAP c) a & b

Description : Which of the following is hardware interrupts? a) RST5.5, RST6.5, RST7.5 b) INTR, TRAP c) a & b

Last Answer : c) a & b

What is the difference between a Clevis pin and a Cotter pin?

Description : What is the difference between a Clevis pin and a Cotter pin?

Last Answer : Clevis Cotter Pin

What is a router?

Description : What is a router?

Last Answer : a router works pretty simple, network signal comes in, and distributes it over the network, the router itself maintains that network if you want to, because a router can be used as a DHCP server, what ... just helps connect a lot more machines to a network i hope that's a bit clearer than wiki

How has the joystick impacted society?

Description : How has the joystick impacted society?

Last Answer : It has affected MY hardware quite significantly ;)

what is the definition of a dicom compliant server?

Description : what is the definition of a dicom compliant server?

Last Answer : answer:http://www.cmt-med.com/site/English/dicom/main.asp www.google.com ..try it, you’ll like it

What are the covers you put over extension cords so people don't trip on them?

Description : What are the covers you put over extension cords so people don't trip on them?

Last Answer : cable runners

How to hang my hammock without trees?

Description : How to hang my hammock without trees?

Last Answer : I’m sure a post set in concrete would be fine. Have you asked your neighbor about using his shed?

In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Description : In 8086, Example for Non maskable interrupts are a) Trapb) RST6.5 c) INTR

Last Answer : a) Trap

What are software interrupts? a) RST 0 - 7 b) RST 5.5 - 7.5 c) INTR, TRAP

Description : What are software interrupts? a) RST 0 - 7 b) RST 5.5 - 7.5 c) INTR, TRAP

Last Answer : a) RST 0

Which of the following 8085 microprocessor hardware interrupt has the lowest priority? (A) RST 6.5 (B) RST 7.5 (C) TRAP (D) INTR

Description : Which of the following 8085 microprocessor hardware interrupt has the lowest priority? (A) RST 6.5 (B) RST 7.5 (C) TRAP (D) INTR 

Last Answer : Answer: D

Interrupts that are initiated by an instruction are_______ A. internal B. external C. hardware D. software

Description : Interrupts that are initiated by an instruction are_______ A. internal B. external C. hardware D. software

Last Answer : D. software

Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software r

Description : Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Last Answer : b. external

Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Description : Interrupts which are initiated by an instruction are a. internal b. external c. hardware d. software

Last Answer : d. software

8085 microprocessor has ............. hardware interrupts. (A) 2 (B) 3 (C) 4 (D) 5

Description : 8085 microprocessor has ............. hardware interrupts. (A) 2 (B) 3 (C) 4 (D) 5

Last Answer : (D) 5

Which interrupt has the highest priority? a) INTR b) TRAP c) RST6.5

Description : Which interrupt has the highest priority? a) INTR b) TRAP c) RST6.5

Last Answer : c) RST6.5

If you are to use [Control-c] as the interrupt key instead of [Del], then you will have to use A. tty ^c B. stty intr \^c C. stty echoe D. stty echo \^a E. None of the above

Description : If you are to use [Control-c] as the interrupt key instead of [Del], then you will have to use A. tty ^c B. stty intr \^c C. stty echoe D. stty echo \^a E. None of the above

Last Answer : B. stty intr \^c

Differences between hardware,firmware & software?

Description : Differences between hardware,firmware & software?

Last Answer : hardware-a physical device Software-programs Firmware-kinda like an operating system or structure that a device uses to function

What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? A) Bus control B) Interrupts C) Bus arbitration D) Status

Description : What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? A) Bus control B) Interrupts C) Bus arbitration D) Status

Last Answer : Answer : C

What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Description : What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Last Answer : c. Bus arbitration

8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Description : 8086 is interfaced to two 8259s (Programmable interrupt controllers). If 8259s are in master slave configuration the number of interrupts available to the 8086 microprocessor is a) 8 b) 16 c) 15 d) 64

Last Answer : a) 8

What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Description : What type of control pins are needed in a microprocessor to regulate traffic on the bus, in order to prevent two devices from trying to use it at the same time? a. Bus control b. Interrupts c. Bus arbitration d. Status

Last Answer : c. Bus arbitration

A job has four pages A, B, C, D and the main memory has two page frames only. The job needs to process its pages in following order: ABACABDBACD Assuming that a page interrupt occurs when a new page is brought in the main memory, irrespective of whether the page is swapped out or not. The number of page interrupts in FIFO and LRU page replacement algorithms are (A) 9 and 7 (B) 7 and 6 (C) 9 and 8 (D) 8 and 6

Description : A job has four pages A, B, C, D and the main memory has two page frames only. The job needs to process its pages in following order: ABACABDBACD Assuming that a page interrupt occurs when a new page is brought in the main ... replacement algorithms are (A) 9 and 7 (B) 7 and 6 (C) 9 and 8 (D) 8 and 6

Last Answer : (C) 9 and 8

Have you ever known someone who interrupts every conversation to turn the focus back on themselves?

Description : Have you ever known someone who interrupts every conversation to turn the focus back on themselves?

Last Answer : When I talk to someone that does that, after a few sentences of it happening I pretty much stop talking. If I do continue, it will be small talk.

In the event of a catastrophe that interrupts availability of insulin for a long period of time what should a diabetic do to stay alive and healthy?

Description : In the event of a catastrophe that interrupts availability of insulin for a long period of time what should a diabetic do to stay alive and healthy?

Last Answer : I would probably not eat much at all and when I did it would be low glycemic index foods.I would stay active and drink as much water as possible.I might try to supplement with chromium ,vanadium and ... resitance.Other than that,there isn't much one can do and death would be inevitable.I am Type1.

Would You would use the imperfect tense to talk about an action that interrupts another?

Description : Would You would use the imperfect tense to talk about an action that interrupts another?

Last Answer : We don't use the name imperfect tense in English. The imperfect is a verb form, found in various languages, which combines past tense and imperfective aspect. It can therefore have meanings ... action is was walking, the action that interrupted the longer action is tripped which is past simple

Would You would use the imperfect tense to talk about an action that interrupts another?

Description : Would You would use the imperfect tense to talk about an action that interrupts another?

Last Answer : We don't use the name imperfect tense in English. The imperfect is a verb form, found in various languages, which combines past tense and imperfective aspect. It can therefore have meanings ... action is was walking, the action that interrupted the longer action is tripped which is past simple

What are the functions of interrupts?

Description : What are the functions of interrupts?

Last Answer : Inform the CPU of the occurrence of external asynchronous events or the presence of external unpredictable conditions, so that the CPU can execute a routine to respond appropriately and promptly.

Interrupts which are initiated by an I/O drive are ___________ A. internal B. external C. Both (A) and (B) D. All of the above

Description : Interrupts which are initiated by an I/O drive are ___________ A. internal B. external C. Both (A) and (B) D. All of the above

Last Answer : B. external

How many interrupts does 8085 have, mention them

Description : How many interrupts does 8085 have, mention them

Last Answer : The 8085 has 5 interrupt signals; they are INTR, RST7.5, RST6.5, RST5.5 and TRAP

Explain priority interrupts of 8085.

Description : Explain priority interrupts of 8085.

Last Answer : The 8085 microprocessor has five interrupt inputs. They are TRAP, RST 7.5, RST 6.5, RST 5.5, and INTR. These interrupts have a fixed priority of interrupt service. If two or more interrupts go ... 8085 is shown in the table. Interrupts Priority TRAP RST 7.5 RST 6.5 RST 5.5 INTR

The method which offers higher speeds of I/O transfers is ___________ a) Interrupts b) Memory mapping c) Program-controlled I/O d) DMA

Description : The method which offers higher speeds of I/O transfers is ___________ a) Interrupts b) Memory mapping c) Program-controlled I/O d) DMA

Last Answer : DMA

The method of synchronising the processor with the I/O device in which the device sends a signal when it is ready is? a) Exceptions b) Signal handling c) Interrupts d) DMA

Description : The method of synchronising the processor with the I/O device in which the device sends a signal when it is ready is? a) Exceptions b) Signal handling c) Interrupts d) DMA

Last Answer : Interrupts

What are various interrupts supported by TMS 320 c54 processor?

Description : What are various interrupts supported by TMS 320 c54 processor?

Last Answer : The C54x DSP supports both software and hardware interrupts: ✔ A software interruptis requested by a program instruction (INTR, TRAP,or RESET) ✔ A hardware interrupt is requested by a ... interrupt ports. ✔ Internal hardware interrupts are triggered by signals from the on-chip peripherals.

Interrupts which are initiated by an I/O drive are a. internal b. external c. software d. all of above

Description : Interrupts which are initiated by an I/O drive are a. internal b. external c. software d. all of above

Last Answer : b. external

The number of software interrupts in 8085 is ____ a) 5 b) 8

Description : The number of software interrupts in 8085 is ____ a) 5 b) 8

Last Answer : b) 8

Which is used to store critical pieces of data during subroutines and interrupts: a. Stack b. Queue c. Accumulator d. Data register

Description : Which is used to store critical pieces of data during subroutines and interrupts: a. Stack b. Queue c. Accumulator d. Data register

Last Answer : a. Stack

n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Description : n 8086 microprocessor the following has the highest priority among all type interrupts. a) NMI b) DIV 0 c) TYPE 255 d) OVER FLOW

Last Answer : a) NMI

What is meant by Maskable interrupts? a) An interrupt which can never be turned off. b) An interrupt that can be turned off by the programmer. c) none

Description : What is meant by Maskable interrupts? a) An interrupt which can never be turned off. b) An interrupt that can be turned off by the programmer. c) none

Last Answer : b) An interrupt that can be turned off by the programmer.

What are level Triggering interrupts? a) INTR&TRAP b)RST6.5&RST5.5 c)RST7.5&RST6.5

Description : What are level Triggering interrupts? a) INTR&TRAP b)RST6.5&RST5.5 c)RST7.5&RST6.5

Last Answer : b)RST6.5&RST5.5

Which of the following is not the function of Microkernel? A) File management B) Low-level memory management C) Inter-process communication D) I/O interrupts management

Description : Which of the following is not the function of Microkernel? A) File management B) Low-level memory management C) Inter-process communication D) I/O interrupts management

Last Answer : A) File management

The essential difference between traps and interrupts is (A) traps are asynchronous and interrupts are synchronous with the program (B) traps are synchronous and interrupts are asynchronous with the program (C) traps are synchronous and interrupts are asynchronous with the I/O devices. (D) None of these.

Description : The essential difference between traps and interrupts is (A) traps are asynchronous and interrupts are synchronous with the program (B) traps are synchronous and interrupts are asynchronous with the program ( ... synchronous and interrupts are asynchronous with the I/O devices. (D) None of these.

Last Answer : (B) traps are synchronous and interrupts are asynchronous with the program

What are the signals that inform the operating system that some activity has taken place, called ? (1) Informers (2) Interrupts (3) Events (4) Handlers

Description : What are the signals that inform the operating system that some activity has taken place, called ? (1) Informers (2) Interrupts (3) Events (4) Handlers

Last Answer : Handlers