The transfer function of a phase lead compensator is found to be the form (s+z1 ) / (s + p1 ) and that of a lag compensator to be of the form (s+z2 ) / (s + p2 ). Then which of the following conditions must be satisfied? 

(A) z1 > p1 and z2 > p2 (B) z1 > p1 and z2 < p2 (C) z1 < p1 and z2 < p2 (D) z1 < p1 and z2 > p2

1 Answer

Answer :

Related questions

Description : increases the steady state accuracy. (a) Integrator (b) Differentiator (c) Phase lead compensator (d) Phase lag compensator Ans:A 10.As a result of introduction of negative feedback which of the following will not decrease ? (a) Band width (b) Overall gain (c) Distortion (d) Instability

Last Answer : Ans: A

Description : Which of the following is CORRECT with respect to a LAG-LEAD compensator ? (A) It is similar to PI controller (B) It acts as Band-pass filter (C) It is Second-order system with one zero, and two poles (D) It acts as a Band-reject filter

Last Answer : Which of the following is CORRECT with respect to a LAG-LEAD compensator ? (A) It is similar to PI controller (B) It acts as Band-pass filter (C) It is Second-order system with one zero, and two poles (D) It acts as a Band-reject filter

Description : at the terminal of a three-phase 6.6Kv alternator a load R=200 ohm is connected between two-phase and the third phase is opened. Z1=z2=5 ohm Zo=2 find out the fault current .

Last Answer : 32A

Description : To obtain integrated form of Clausius-Clapeyron equation, ln (P2/P1) = (∆HV/R) (1/T1- 1/T2) from the exact Clapeyron equation, it is assumed that the (A) Volume of the liquid phase is negligible compared to ... gas (C) Heat of vaporisation is independent of temperature (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Description : Develop a ‘C’ program to transfer the data from port P0 to port P1.

Last Answer : #include void main (void ) { unsigned char X; P0=0XFF; // P0 as input port P1=0X00;//P1 as output port while(1) //do forever { X = P0;//read port0 P1 = X;// output data to port1 }

Description : Center point of circle a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2 b.[x1-x2]/2; [y1-y2]/2; [z1-z2]/2 c.[x1-x2]; [y1-y2]; [z1-z2] d.[x2-x1]; [y2-y1]; [z2-z1]

Last Answer : a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2

Description : How to use Samsung Z1 as a WebCam -Biology

Last Answer : answer:

Description : How to share data connection with other devices on Samsung Z1 -Biology

Last Answer : answer:

Description : How to troubleshoot problems connecting to WiFi on Samsung Z1 -Biology

Last Answer : answer:

Description : How to activate Bluetooth on Samsung Z1 -Biology

Last Answer : answer:

Description : Hi, I want to ask if I can unblock a simlock after playing rom for another or if it has no price .. Thanks for the advice :) PS: sony xperia Z1 C6903 simlock: 3 Three UK

Last Answer : Need Answer

Description : Which was the first programmable computer: a) Z0 b) Z1 c) Z 2 d) None of These

Last Answer : b) Z1

Description : Two unpedauces given by Z1 = 10 + j5 and Z2 = 8 + j9 are joined in parallel and connected across a voltage of V = 200 + j0. Calculate the circuit current and branch currents. Draw the vector diagram.

Last Answer : Solution: Given, Z1=10+j5, Z2=8+j9, V=200+j0

Description : A resistor placed in parallel to the output of a power supply _____________. A. is a temperature compensator B. corrects power factor C. prevents excessive currents D. aids in output voltage regulation

Last Answer : Answer: D

Description : In general, polyphase induction motors can be started on full line voltage by means of ______________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

Description : Low horsepower, polyphase, induction motors can be started with full voltage by means of _____________. A. compensator starters B. autotransformer starters C. across-the-line starters D. primary-resistor starters

Last Answer : Answer: C

Description : A static VAR compensator is a (A) series connected thyristor based controller (B) shunt connected thyristor based controller (C) energy storage device (D) combined series–shunt connected controller 

Last Answer : Shunt connected thyristor based controller

Description : Which of the following compensator will increase the bandwidth of the system: (1) Phase lag (3) Lag-Iead (2) Phase lead (4) None of these

Last Answer : Which of the following compensator will increase the bandwidth of the system: (1) Phase lag (3) Lag-Iead (2) Phase lead (4) None of these

Description : In lag compensator the damping ratio, gain and steady state error (ess) are   (a) Decreases, Decreases and Increases (b) Decreases, Increases and Increases (c) Increases, Increases and Decreases (d) Increases, Decreases and Decreases

Last Answer : In lag compensator the damping ratio, gain and steady state error (ess) are Increases, Decreases and Decreases

Description : Static Synchronous Compensator (STATCOM)

Last Answer : Static Synchronous Compensator (STATCOM)  STATCOM stands for Static Synchronous Compensator or Condenser. It may be a source of reactive power or sink of reactive AC power. It can ... and Controllers etc. STATCOM have symmetric lead-lag capability. STATCOM have no moving part.

Description : What is static var compensator ?

Last Answer : Static VAR Compensator (SVC)  SVC are use for regulating transmission voltage and for improving power quality of industrial load. SVC is made from one or more banks ... system. Static VAR Compensator is more reliable than dynamic compensation scheme like synchronous condenser.

Description : Calculate the power loss, if power generated by two plants are P1=50 MW and P2 =40 MW and the loss coefficients are B11=0.001, B22=0.0025 and B12=-0.0005.  (A) 4.5 MW (B) 5.5 MW (C) 6.5 MW (D) 8.5 MW

Last Answer : A

Description :  A minimum phase transfer function has: a) poles in the left half of the s -plane  b) zeros in the left half of the s -plane  c) poles in the left half of the s -plane and zeros in the right ... plane  d) no poles and zeros in the right half of the s -plane or on the jw - axis excluding origin

Last Answer :  A minimum phase transfer function has: no poles and zeros in the right half of the s -plane or on the jw - axis excluding origin

Description : Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Last Answer : a.2u3-3u2+2u+4

Description : Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1

Last Answer : a.-5u3+8u2+u+1

Description : Two lines L1 and L2 having Parametric equations are P1=[3 4 7]+u[2 2 -6] and P2=[15 -2]+u[1 4 2]. Tangent vector for line L1 a.2i+2j-6k b.2i+2j+6k c.2i-2j-6k d.6-2j-2k

Last Answer : a.2i+2j-6k

Description : Two lines are parallel when a.P1 X P2=0 b.P1 . P2=0 c.P1 = P2 d.P1+ P2=0

Last Answer : a.P1 X P2=0

Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Last Answer : c.[3.75 4.75 6.75]

Description : Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k

Last Answer : b.3i-j-5k

Description : Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]

Last Answer : a.[3 5 8]+u[3 -1 -5]

Description : In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Last Answer : a.(10, 10)

Description : The molecular formula of phosphorus is (a) P1 (b) P2 (c) P3 (d) P4

Last Answer : Ans:(d)

Description : Q No: 251 In a sludge digestion tank if the moisture content of sludge V1 litres is reduced from p1 % to p2 % the volume V2 is A. [(100 + P1)/(100 – P2)] V1 B. [(100 – P1)/(100 + P2)] V1 C. [(100 – P1)/(100 – P2)] V1 D. [(100 + P2)/(100 – P1)] V1

Last Answer : ANS: C

Description : A signal is measured at two different points. The power is P1 at the first point and P2 at the second point. The dB is 0. This means________. A) P2 is zero B) P2 equals P1 C) P2 is much larger than P1 D) P2 is much smaller than P1

Last Answer : P2 equals P1

Description : The unit vector to the points p1(0,1,0), p2(1,0,1), p3(0,0,1) is a) (-j – k)/1.414 b) (-i – k)/1.414 c) (-i – j)/1.414 d) (-i – j – k)/1.414

Last Answer : a) (-j – k)/1.414

Description : Find a vector normal to a plane consisting of points p1(0,1,0), p2(1,0,1) and p3(0,0,1) a) –j – k b) –i – j c) –i – k d) –i – j – k

Last Answer : a) –j – k

Description : Find out the price elasticity in the following example : Price Demand 5(P1) 10(Q1) 4(P2) 15(Q2) (a) – 2.5 (b) + 3.5 (c) + 4.0 (d) + 2.5

Last Answer : (a) – 2.5

Description : A short column (30 cm 20 cm) carries a load P1 at 4 cm on one side and another load P2at 8 cm on  the other side along a principal section parallel to longer dimension. If the extreme intensity on  either side is same, the ... to P2 will be  (A) 2/3  (B) 3/2  (C) 8/5  (D) 5/8 

Last Answer : (C) 8/5 

Description : If f1 and f2 are the distances from the optical centre of a convex lens of focal length to conjugate two points P1 and P2 respectively, the following relationship holds good (A) f = f1 + f2 (B) f = ½ (f1 + f2) (C) 1/f = 1/f1 + 1/f2 (D) None of these

Last Answer : (C) 1/f = 1/f1 + 1/f2

Description : The expression for entropy change given by, ΔS = - nR ln (P2/P1), holds good for (A) Expansion of a real gas (B) Reversible isothermal volume change (C) Heating of an ideal gas (D) Cooling of a real gas

Last Answer : (B) Reversible isothermal volume change

Description : An ideal gas is taken around the cycle ABCA as shown in P-V diagram below: The work done by the gas during the cycle is equal to (A) 12 P1V1 (B) 6 P1 V1 (C) 3 P1V1 (D) P1 V1

Last Answer : (C) 3 P1V1

Description : The expression, ∆G = nRT. ln(P2/P1), gives the free energy change (A) With pressure changes at constant temperature (B) Under reversible isothermal volume change (C) During heating of an ideal gas (D) During cooling of an ideal gas

Last Answer : (A) With pressure changes at constant temperature

Description : The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Last Answer : C) Work done under isothermal condition

Description : A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to ... final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Last Answer : (C) Geometric

Description : According to the American Society of Anesthesiology Physical Status Classification System, a patient with severe systemic disease that is not incapacitating is noted to have physical status ... normal healthy patient d) P2 Classification P2 reflects a patient with mild systemic disease

Last Answer : a) P3 Classification P3 patients are those who have compensated heart failure, cirrhosis, or poorly controlled diabetes, for example.

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

Description : What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Last Answer : 108 hp

Description : What is the resulting pressure when one pound of air at 15 psia and 200 ˚F is heated at constant volume to 800 ˚F?  A.15 psia  B. 28.6 psia  C. 36.4 psia.  D. 52.1 psia Formula : T1/p1 = T2/p2 p2= p1T2 / T1

Last Answer : 28.6 psia

Description : Which of the following is the mathematical representation of the Charles’s law?  A. V1/V2= P2/P1  B. V1/T1=V2/T2  C. V1/T2=V2/T1  D. V1/V2=√P2/√P1

Last Answer : V1/T1=V2/T2

Description : Which of the following is the Ideal gas law (equation)?  A. V/T = K  B. V= k*(1/P)  C. P1/T1 = P2/T2  D. PV = nRT

Last Answer : PV = nRT