The pressure at the bottom of a liquid tank does not depend on which area? -Do You Know?

The pressure at the bottom of a liquid tank does not depend on which area? -Do You Know?
by

1 Answer

Answer :

answer:
by

Related questions

The pressure at the bottom of a liquid tank does not depend on which area?

Description : The pressure at the bottom of a liquid tank does not depend on which area?

Last Answer : Area of the liquid surface

1. The pressure at the bottom of a liquid tank does not depend on which area? 2. ‘Chinaman’ refers to which game? 3. In human body, into which does the pancreas secretes its enzymes? 4. What does increase in carbon dioxide in atmosphere cause? 5. What is Apabhramsa?

Description : 1. The pressure at the bottom of a liquid tank does not depend on which area? 2. Chinaman' refers to which game? 3. In human body, into which does the pancreas secretes its enzymes? 4. ... is the frequency of tropical cyclones in the Bay of Bengal maximum? 20. By whom was Saka era founded?

Last Answer : Answer : 1. Area of the liquid surface 2. Cricket 3. Duodenum 4. Rise in earth temperature 5. A work of the Jains 6. English 7. Decreases 8. Rajkumari Amrit Kaur 9. North west 10. ... Australia 15. Kanishka 16. Carbon dioxide 17. Sir Edward Lutyens 18. Bengali 19. After summer 20. Kanishka

A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A × d × a × 2g) (B) 2A × d × a × 2g) (C) 2A × - d × a × 2g) (D) 2A × 3/2 - 3/2)/Cd × a × 2g)

Description : A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross￾sectional area (a) at its bottom. The time required to bring the liquid level from H1 to H2 will be (A) 2A d a 2g) (B) 2A d ... 2g) (C) 2A - d a 2g) (D) 2A 3/2 - 3/2)/Cd a 2g)

Last Answer : Answer: Option C

Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The clearance between the tank bottom and the bottom most impeller should be about (where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Description : Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The ... where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Last Answer : (B) D

Torricelli's theorem states that the velocity ‘v’ of the liquid emerging from the bottom of the wide tank is given by √(2gh). In practice, this velocity is: A. equal to √(2gh) B. greater than √(2gh) C. lesser than √(2ghD. independent of height and gravitational field strength)

Description : Torricelli's theorem states that the velocity ‘v’ of the liquid emerging from the bottom of the wide tank is given by √(2gh). In practice, this velocity is: A. equal to √(2gh) B. greater than √(2gh) C. lesser than √(2gh) D. independent of height and gravitational field strength

Last Answer :  lesser than √(2gh

If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity. Static fluid pressure does not depend on the shape, total mass, or surface area of the liquid.

If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is – (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : (2) Surface area of the bottom of the vessel Explanation: The pressure exerted by a static fluid depends only upon the depth of the fluid, the density of the fluid, and the acceleration of gravity.

If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Description : If we want to calculate the pressure of a liquid at the bottom of a vessel, the quantity which is not required to determine it, is (1) Height of the liquid column (2) Surface area of the bottom of the vessel (3) Density of the liquid (4) Acceleration due to gravity at the bottom of the vessel

Last Answer : Surface area of the bottom of the vessel

The efficiency of sedimentation tank does not depend upon (A) Depth of tank (B) Length of tank (C) Detention period (D) Velocity of water

Description : The efficiency of sedimentation tank does not depend upon  (A) Depth of tank  (B) Length of tank  (C) Detention period  (D) Velocity of water

Last Answer : (D) Velocity of water

What does the value of pressure in a point of a fixed liquid in a container not depend on ?

Description : What does the value of pressure in a point of a fixed liquid in a container not depend on ?

Last Answer : The value of pressure at any point of a fixed liquid in a container does not depend on the area of ​​the container.

Epiphytes are plant which depend on other plants for which purpose? -Do You Know?

Description : Epiphytes are plant which depend on other plants for which purpose? -Do You Know?

Last Answer : answer:

A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter liquid of specific gravity 0.75 to a depth of 2 m. The resultant pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Description : A rectangular tank 10 m x 5 m in plan and 3 m deep is divided by a partition wall parallel to the shorter wall of the tank. One of the compartments contains water to a depth of 3 m, and the other a lighter ... pressure thrust on the partition wall is (a) 1000 kg (b) 1500 kg (c) 2000 kg (d) 2500 kg

Last Answer : Correct Answer is 15000 kg

Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Description : Filtration rate does not depend upon the (A) Pressure drop & area of filtering surface (B) Resistance of the cake & the septum (C) Properties of the cake & the filtrate (D) None of these

Last Answer : (D) None of these

The frictional resistance in laminar flow does not depend on the (A) Area of surface in contact (B) Flow velocity (C) Fluid temperature (D) Pressure of flow

Description : The frictional resistance in laminar flow does not depend on the (A) Area of surface in contact (B) Flow velocity (C) Fluid temperature (D) Pressure of flow

Last Answer : (A) Area of surface in contact

I'm concerned about one of my Black Mollies, it's just lying at the bottom of the tank. Does anyone know what could be wrong?

Description : I'm concerned about one of my Black Mollies, it's just lying at the bottom of the tank. Does anyone know what could be wrong?

Last Answer : What are your nitrate and ammonia readings? You also said they were new, how did you acclimate them?

What does it mean when a gold fish sits on the bottom of the tank and only swims around when it is time to eat?

Description : What does it mean when a gold fish sits on the bottom of the tank and only swims around when it is time to eat?

Last Answer : He could just be ill. Just take care of him as you usually do. Get the water tested see if anything could be causing the illness. I’ve seen it happen to fish before they’ll just snap out of it an get back to normal.

How do you clean the gravel at the bottom of the fish tank?

Description : We change 1/3 of the water in our fishes tank every week. How are we supposed to clean out the gravel?

Last Answer : Place the fish carefully in another container with half of the old water and the other half fresh water. Unplug any electrical equipment. Drain the tank. Separate 2 cups of dirty gravel and put aside. Place ... tank mixing the 2 cups of reserved gravel with the clean so as not to shock the fish.

A rectangular tank 8m deep is full of water. By how much does the bottom appear to be raised if the refractive index of water is `4//3`?

Description : A rectangular tank 8m deep is full of water. By how much does the bottom appear to be raised if the refractive index of water is `4//3`?

Last Answer : A rectangular tank 8m deep is full of water. By how much does the bottom appear to be raised if the refractive index of water is `4//3`?

Why is my goldfish laying on the bottom of the tank?

Description : Why is my goldfish laying on the bottom of the tank?

Last Answer : If you don't have a pair of fish actively and obviously chasing around like mad spawning, whatever it is you are seeing, I can almost certainly guarantee that they won't be eggs.

Why is my goldfish laying on the bottom of the tank?

Description : Why is my goldfish laying on the bottom of the tank?

Last Answer : If you don't have a pair of fish actively and obviously chasing around like mad spawning, whatever it is you are seeing, I can almost certainly guarantee that they won't be eggs.

The detention time (t) of a settling tank, may be defined as the time required for A. A particle to travel along its length B. A particle to travel from top surface to bottom sludge zone C. The flow of sewage to fill the tank D. None of these

Description : The detention time (t) of a settling tank, may be defined as the time required for A. A particle to travel along its length B. A particle to travel from top surface to bottom sludge zone C. The flow of sewage to fill the tank D. None of these

Last Answer : ANS: C

Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept 5 to 7.5 cm below the inlet invert level C. The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Description : Which one of the following statements regarding septic tanks is wrong? A. A gap of 7.5 cm between the bottom of the covering slab and the top level of scum is provided B. The outlet invert level is kept ... . The minimum width of septic level is 90 cm D. The depth of tank is kept equal to its width

Last Answer : ANS: D

Path followed by water jet issuing from the bottom of a water tank will be a (A) Parabola (vertex being at the opening) (B) Hyperbola (C) Horizontal straight line (D) Zig-zag path (which is geometrically undefined)

Description : Path followed by water jet issuing from the bottom of a water tank will be a (A) Parabola (vertex being at the opening) (B) Hyperbola (C) Horizontal straight line (D) Zig-zag path (which is geometrically undefined)

Last Answer : (A) Parabola (vertex being at the opening)

Pipe A usually fills a tank in 2 hours. On account of a leak at the bottom of the tank, it takes pipe A 30 more minutes to fill the tank. How long will the leak take to empty a full tank if pipe A is shut? a) 4 hours b) 3 hours c) 6 hours d) 8 hours e) 10 hours

Description : Pipe A usually fills a tank in 2 hours. On account of a leak at the bottom of the tank, it takes pipe A 30 more minutes to fill the tank. How long will the leak take to empty a full tank if pipe A is shut? a) 4 hours b) 3 hours c) 6 hours d) 8 hours e) 10 hours

Last Answer : portion of the tank filled by the pipe A in 1 hour = ½ of the tank let the portion of the tank emptied because of the leak in 1 hour be 1/x of the tank therefore, in 1 hour , portion of the tank filled = 1/2 - 1 ... 1/2 - 1/x = 1/2.5 or x = 10 hence, it takes 10 hours to empty a full tank Answer: e)

Two taps P and Q can separately fill a tank in 120mins and 150 mins respectively. There is a 3rd tap in the bottom of the tank to empty it. If all of the 3 taps are simultaneously opened, then the tank is full in 100 mins. In how much time the 3rd pipe alone can empty the tank? A) 100 B) 200 C) 300 D) 400

Description : Two taps P and Q can separately fill a tank in 120mins and 150 mins respectively. There is a 3rd tap in the bottom of the tank to empty it. If all of the 3 taps are simultaneously opened, then the tank is full ... . In how much time the 3rd pipe alone can empty the tank? A) 100 B) 200 C) 300 D) 400

Last Answer : B Work done by the 3 tap in 1 min = 1/100 – ( 1/120 + 1/150) = 1/100 – (5+4/600) =1/100 – 9/600 =6-9/600 = - 3/600 = - 1/200(negative signs mean empting) Therefore the 3rd tap alone can empty the tank in 200 mins

A tank can be filled by an inlet tap at the rate of 8 litres per minute. A leak in the bottom of a tank can empty the full tank in 16 hours. When the tank is full, the inlet is opened and due to the leak, the tank is empty in 80 hours. How many litres does the tank hold? A) 8000 litre B) 9560 litre C) 8525 litre D) 9600 litre

Description : A tank can be filled by an inlet tap at the rate of 8 litres per minute. A leak in the bottom of a tank can empty the full tank in 16 hours. When the tank is full, the inlet is opened and due to ... hours. How many litres does the tank hold? A) 8000 litre B) 9560 litre C) 8525 litre D) 9600 litre

Last Answer : D Part emptied by the leak in 1 hour = 1/16 part filled by (leak & inlet open) in 1 hour = 1/80 Part filled by the inlet tap in 1 hour = 1/16 – 1/80 = 1/20 Inlet tap fills the tank in = 20 hours Inlet tap fills water at the rate of 8 litres a minute. Capacity of tank = 20 * 60 * 8= 9600 litre

In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. Which of the following statement is correct? (A) The pressure on the wall at the liquid level is minimum(B) The pressure on the bottom of the wall is maximum (C) The pressure on the wall at the liquid level is zero, and on the bottom of the wall is maximum (D) The pressure on the bottom of the wall is zero

Description : A vertical wall is subjected to a pressure due to one kind of liquid, on one of its sides. Which of the following statement is correct? (A) The pressure on the wall at the liquid level is maximum (B) ... and on the bottom of the wall is maximum (D) The pressure on the bottom of the wall is zero

Last Answer : Answer: Option C

For a body floating in a liquid the normal pressure exerted by the liquid acts at A) Bottom surface of the body (B) C.G. of the body (C) Metacentre (D) All points on the surface of the body

Description : For a body floating in a liquid the normal pressure exerted by the liquid acts at A) Bottom surface of the body (B) C.G. of the body (C) Metacentre (D) All points on the surface of the body

Last Answer : Answer: Option D

The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Description : The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Last Answer : (A) Increase

Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Description : Heat transfer rate to the charge/stock in a furnace does not depend upon the (A) Type of fuels viz. solid, liquid or gaseous (B) Flue gas temperature (C) Emissivity of refractory walls (D) Initial temperature of the charged stock

Last Answer : (A) Type of fuels viz. solid, liquid or gaseous

An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Description : An irreversible first order reaction is being carried out in a CSTR and PFR of same volume. The liquid flow rates are same. The relative conversion will (A) Be more in CSTR than in PFR (B) Be more in PFR than in CSTR (C) Be same in both cases (D) Depend on the temperature

Last Answer : (B) Be more in PFR than in CSTR

With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Description : With an increase in size of tube, the rise or depression of liquid in the tube due to surface tension will (A) Decrease (B) Increase (C) Remain unchanged (D) Depend upon the characteristics of liquid

Last Answer : Answer: Option A

The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Description : The amount of heat required to change a boiling liquid to a gas at the same temperature depends on one of the following properties of the liquid. Does it depend on the liquid's: w) heat of fusion x) heat of vaporization y) temperature z) density

Last Answer : ANSWER: X -- HEAT OF VAPORIZATION

Why is a water tank appears shallower when it is viewed from top? -Do You Know?

Description : Why is a water tank appears shallower when it is viewed from top? -Do You Know?

Last Answer : The bending of light (i.e. refraction of light) as it moves from water to air makes the water tank appear to be less shallower than its real depth.

The tendency of liquid drop to contract and why does it occupy minimum area? -Do You Know?

Description : The tendency of liquid drop to contract and why does it occupy minimum area? -Do You Know?

Last Answer : answer:

The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Description : The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Last Answer :  increases with depth of the wall

Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity(C) Surface tension(D) Density

Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density

Last Answer : (D) Density

Which of the following equipments is not used in liquid-liquid extraction? (A) Pachuka tank (B) Agitated vessels (C) Centrifugal extractors (D) Packed towers

Description : Which of the following equipments is not used in liquid-liquid extraction? (A) Pachuka tank (B) Agitated vessels (C) Centrifugal extractors (D) Packed towers

Last Answer : (A) Pachuka tank

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank

The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Description : The conversion XA and residence time data are collected for zero order liquid phase reaction in a stirred tank reactor. Which of the following will be a straight line? (A) XA Vs . τ (B) XA Vs ln τ (C) XA /(1 - XA )Vs τ (D) XA (1 - XA )Vs τ

Last Answer : (A) XA Vs . τ

Minimum safe distance between two liquid fuel storage tanks is equal to (where, H = height of the tank) (A) H (B) H/2 (C) H/4 (D) H/6

Description : Minimum safe distance between two liquid fuel storage tanks is equal to (where, H = height of the tank) (A) H (B) H/2 (C) H/4 (D) H/6

Last Answer : Option D

An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Description : An open tank containing liquid is moving with an acceleration on an inclined plane. The inclination of the free surface of the liquid will be __________ to the acceleration of the tank. (A) Equal to (B) Directly proportional (C) Inversely proportional (D) None of these

Last Answer : Answer: Option B

When a tank containing liquid moves with an acceleration in the horizontal direction, then the free surface of the liquid (A) Remains horizontal (B) Becomes curved (C) Falls on the front end (D) Falls on the back end

Description : When a tank containing liquid moves with an acceleration in the horizontal direction, then the free surface of the liquid (A) Remains horizontal (B) Becomes curved (C) Falls on the front end (D) Falls on the back end

Last Answer : Answer: Option C

An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice(D) None of these

Description : An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice (D) None of these

Last Answer : Answer: Option B

Three pipes P, Q and R can fill a tank from empty to full in 40 minutes, 15 minutes, and 30 minutes respectively. When the tank is empty, all the three pipes are opened. P, Q and R discharge chemical solutions X, Y and Z respectively. What is the proportion of the solution Y in the liquid in the tank after 5 minutes? a) 8 / 15 b) 7 / 15 c) 8 / 17 d) 6 / 13 e) 8 / 13

Description : Three pipes P, Q and R can fill a tank from empty to full in 40 minutes, 15 minutes, and 30 minutes respectively. When the tank is empty, all the three pipes are opened. P, Q and R discharge chemical solutions X, Y and Z respectively. ... 5 minutes? a) 8 / 15 b) 7 / 15 c) 8 / 17 d) 6 / 13 e) 8 / 13

Last Answer : a Part of the tank filled by pipe P in 1 minute = 1 / 40 Part of the tank filled by pipe Q in 1 minute = 1 / 15 Part of the tank filled by pipe R in 1 minute = 1/ 30 Here we have to find the proportion of ... together in 5 minute = 5 1/8 = 5/ 8 Required proportion = (1/3) / ( 5/8) = 8 / 15

3 faucet A,B,C can fill a cistern from empty to full in 45mins, 35mins, and 25 mins respectively. When the cistern is empty all the 3 faucets are opened. A,B,c discharge chemical solutions A,B,C respectively. What is the proportion of solution C in the liquid in the tank after 5 mins? A) 63/143 B) 72/151 c) 67/173 D) 81/167

Description : 3 faucet A,B,C can fill a cistern from empty to full in 45mins, 35mins, and 25 mins respectively. When the cistern is empty all the 3 faucets are opened. A,B,c discharge chemical solutions A,B,C respectively. What is ... the liquid in the tank after 5 mins? A) 63/143 B) 72/151 c) 67/173 D) 81/167

Last Answer : A Part filled by (A+B+C) in 5 mins = 5(1/45 +1/35 + 1/25) = 5 (35+45+63/1575) = 143/315 Part filled by c in 5 mins = 5/25 = 1/5 Required ratio = 1/5 * 315/143 =63/143.

What does atmospheric pressure depend on ?

Description : What does atmospheric pressure depend on ?

Last Answer : Atmospheric pressure depends on the height of the atmosphere and the density of the air.

Why does the volume of gaseous matter depend on pressure ?

Description : Why does the volume of gaseous matter depend on pressure ?

Last Answer : We know that in the case of solids and liquids the intermolecular distance is very small and in this case the expansion and contraction of the volume in the reduction and increase of pressure is ... applying extra pressure. Therefore the volume of gaseous matter depends on the pressure of the gas.

Assertion (A): Pressure, volume, and temperature are all extensive properties. Reason (R ) : Extensive properties depend upon the amount and nature of

Description : Assertion (A): Pressure, volume, and temperature are all extensive properties. Reason (R ) : Extensive properties depend upon the amount and nature of

Last Answer : Assertion (A): Pressure, volume, and temperature are all extensive properties. Reason (R ) : Extensive ... . D. If both Assertion & Reason are false.