In a stepper motor the angular displacement
(A) can be precisely controlled.
(B) it cannot be readily interfaced with micro computer based controller.
(C) the angular displacement cannot be precisely controlled.
(D) it cannot be used for positioning of work tables and tools in NC machines.

1 Answer

Answer :

(A) can be precisely controlled.

Related questions

Description : In a stepper motor the angular displacement:  (A) can be precisely controlled (B) cannot be readily interfaced with micro computer based controller (C) cannot be precisely controlled. (D) cannot be used for positioning of work tables and tools in NC machines

Last Answer : In a stepper motor the angular displacement:  can be precisely controlled. 

Description : explain how a stepper motor is controlled using driver. give relevant hardware and software details.

Last Answer : A stepper motor is an electric motor that rotates fix number of degrees whenever we apply a step signal. the stepper motor can rotate 1.8-degree full step or ... driver 2. controlling a stepper motor directly Application of stepper motor: disk driversprintersphotocopyfax machinerobotscamcorder

Description : What Is Stepper Motor. what Is Its Uses?

Last Answer : Stepper motor is the electrical machine which act upon input pulse applied to it. it is one type of synchronous motor which runs in steps in either direction instead of running in complete cycle.so, in automation parts it is used.

Description : A 1.8°step, 4-phase stepper motor has a total of 40 teeth on 8 pole of stator. The number of rotor teeth for their rotor will be (A) 40 (B) 50 (C) 100 (D) 80

Last Answer : (B) 50

Description : The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Last Answer : (D) DC series motor

Description : An a.c. tachometer is just a ________with one phase excited from the carrier frequency. (A) two-phase A.C. servomotor (B) two-phase induction motor (C) A.C. operated universal motor (D) hybrid stepper motor.

Last Answer : Ans: D This is a special purpose machine whose stator coil can be energized by electronically switched current.

Description : A 3 stack stepper motor with 12 numbers of rotor teeth has a step angle of ____________. (A) 12° (B) 8° (C) 24° (D) 10°

Last Answer : Ans. D Given m = 3, Nr = 12 Step angle = 360 / m x Nr = 360 /3 x 12 = 10°

Description : A stepper motor is (A) a dc motor. (B) a single-phase ac motor. (C) a multi-phase motor. (D) a two phase motor.

Last Answer : Ans: D Stepper motor works on 1-phase-ON or 2-phase –ON modes of operation

Description : NC contouring is an example of a.Continuous path positioning b.Point-to-point positioning c.Absolute positioning d.Incremental positioning

Last Answer : a.Continuous path positioning

Description : In accordance with Coast Guard Regulations (46 CFR), each battery operated relay-controlled lantern must _____________. A. be readily portable B. contain a dry cell battery having a minimum capacity of ... automatic battery charger to maintain the battery in a fully charged state D. all of the above

Last Answer : Answer: C

Description : Which statement is true concerning a split-phase induction motor? A. Motor rotation can be reversed without changing the windings or leads. B. Motor speed can be readily adjusted from zero to full ... proper wiring. D. Motor rotation can be reversed by reversing the leads on the starting winding.

Last Answer : Answer: D

Description : Which system communicates with the outside word via the I/O devices interfaced to it: a. Microprocessor b. Microcomputer c. Digital computer d. All of these

Last Answer : b. Microcomputer

Description : The angular velocity depends upon the rate of change of the _______. (1) Angular Distance (2) Angular acceleration (3) Angular Displacement (4) torque

Last Answer : (3) Angular Displacement Explanation: The angular velocity is defined as the rate of change of angular displacement and is a vector quantity which specifies the angular speed of an object and the axis about which the object is rotating.

Description : Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Last Answer : (d) combined thrust and radial loads at high speed

Description : If an object moves a circular distance ‘s’ of radius ‘r’, then it's angular displacement is A. s⁄r B. r⁄s C. rs D. r2s

Last Answer : s⁄

Description : Angle through which an object has moved is called it's A. linear displacement B. linear distance C. angular displacement D. angular distance

Last Answer : angular displacement

Description : Pick up the correct statement from the following (A) 1 second of arc corresponds to a displacement ratio of 1:206, 300 (B) 1 degree of arc corresponds to a displacement ratio of 1:57 (C) ... to propagate themselves along a traverse as the square root of the number of stations (D) All the above

Last Answer : (D) All the above

Description : 11. If a body floating in a liquid does not return back to its original position and heels farther "away when given a small angular displacement, the body is said to be in neutral equilibrium. A) Yes B) No

Last Answer : B

Description : If a body floating in a liquid returns back to its original position, when given a small angular displacement, the body is said to be in (A) Neutral equilibrium (B) Stable equilibrium (C) Unstable equilibrium (D) None of these

Last Answer : Answer: Option B

Description : When a body, floating in a liquid, is given a small angular displacement, it starts oscillating about a point known as (A) Centre of pressure (B) Centre of gravity (C) Centre of buoyancy (D) Metacentre

Last Answer : Answer: Option D

Description : If a body floating in a liquid occupies a new position and remains at rest in this new position, when given a small angular displacement, the body is said to be in __________ equilibrium. (A) Neutral (B) Stable (C) Unstable (D) None of these

Last Answer : Answer: Option A

Description : On the synchro schematic symbol, what indicates the angular displacement of the rotor?

Last Answer : . The position of the arrow.

Description : The angular displacement between two interconnected stations is mainly due to (a) armature reactance of both alternators (b) reactance of the interconnector (c) synchronous reactance of both the alternators (d) all of the above

Last Answer : (a) armature reactance of both alternators

Description : When the interconnector between two stations has large reactance (a) the transfer of power will take place with voltage fluctuation and noise (b) the transfer of power will take place with least loss ... out of step be¬cause of large angular displacement between the stations (d) none of the above

Last Answer : (c) the stations will fall out of step be¬cause of large angular displacement between the stations

Description : In physics, a radian per second squared is a unit of: w) angular displacement x) angular velocity y) angular acceleration z) angular momentum.

Last Answer : ANSWER: Y -- ANGULAR ACCELERATION

Description : In physics, a radian per second is a unit of: w) angular displacement x) angular velocity y) angular acceleration z) angular momentum.

Last Answer : ANSWER: X -- ANGULAR VELOCITY 

Description : What is a stepper motor in Arduino?

Last Answer : A stepper motor in Arduino is a type of motor that can be used for precise control of position, speed, and acceleration.

Description : What is a stepper motor in Arduino?

Last Answer : A stepper motor is a type of motor used in Arduino projects that can rotate to a specific position based on a signal sent by an Arduino board.

Description : Programming a NEMA 17 stepper motor to microstep with an Arduino?

Last Answer : There are literally thousands of arduino code examples out there. This is something you should figure out on your own because the act of doing so will make you a better tinkerer. A typical stepper will have like ... digital I/o pins to output the step sequence. Even an uno or mini pro will do that.

Description : Selecting a correct DC stepper motor for a project?

Last Answer : You will need to calculate the moment of inertia of the shaft you are turning so you can determine the required torque. You will get that after you determine the peak acceleration from the velocity ... Once you have acceleration, displacement, and moment of inertia you can size the motor for power.

Last Answer : Stepper Motor Such One Kind of Motor Which Equal In the corner Rotation Generated By To whom Step To say Is Since Step by step Step by step Equal In the corner Rotation Creation By So This one Stepper Motor Says.

Description : Where is the stepper motor located in peugeot?

Last Answer : Need answer

Description : How do I clean a stepper motor Peugeot 206?

Last Answer : Need answer

Description : How much does it cost to get a replacement stepper motor?

Last Answer : The cost for a replacement stepper motor wil depend greatly on the exact type of motor to be relced. Stpper motors are availbl in 100's of varieties at the low end th cost is $25,but can reach into the thousands.

Description : What's the purpose of a stepper motor?

Last Answer : Industrial applications of a stepper motor are in multi-axis machine CNC machines.They are also commonly usd in are used in floppy disk drives, flatbed scanners,and computer printers.

Description : What is a stepper motor driver used for?

Last Answer : You can find good cheap stepper motor drivers rebuilt online at a hobby electronics website. the driver tell the stepper motor how many steps to take at a time.

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

Description : What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Last Answer : Actuator arm assembly.

Description : List applications of stepper motor.

Last Answer : Applications of Stepper Motor: 1) Computer controlled systems 2) Numerical control of machine tools 3) Tape drives 4) Floppy disc drives 5) Computer printers 6) X-Y plotters 7) ... ) Extruders 21) Engravers 22) Analytical and Medical instruments 23) Embroidery Machines 24) Packaging Machines

Description : List different types of stepper motor. State one application of stepper motor.

Last Answer : Types of stepper motor : (i)Variable - reluctance motor (ii) Permanent- magnet motors (iii) Hybrid motors. Applications of stepper motor : In robotics, In CNC machines, In computers, printers, ... In Watches, In biomedical applications such as X-ray machines, CT scan, In Process control systems. 

Description : applications of each: i) Universal motor ii) Stepper motor.

Last Answer : i) Applications of Universal motor: 1) portable drills 2) hair dryers 3) grinders 4) mixers 5) table-fans 6) blowers 7) polishers 8) Kitchen appliances  ii) Applications of Stepper motor ... 7) robotics 8) CNC machine 9) Control systems 10) Biomedical applications 10) XY recorder 11) plotters

Description : Write two application of the following motor (i) AC servo motor (ii) Stepper motor

Last Answer : (i)Applications of AC Servo Motor: 1. Computers 2. Robotics and toys 3. CD/DVD players 4. Textile industries 5. Instrument servos 6. Tracking and guidance system 7. Self- ... Laser cutters 20.Extruders 21.Engravers 22.Analytical and Medical instruments 23.Embroidery Machines 24.Packeging Machines

Description : For a 1.8o, 2-phase bipolar stepper motor, the stepping rate is 100 steps/second. The rotational speed of the motor in rpm is  (A) 15 (B) 30 (C) 60 (D) 90

Last Answer : For a 1.8o, 2-phase bipolar stepper motor, the stepping rate is 100 steps/second. The rotational speed of the motor in rpm is 30 

Description : In a stepper motor, the detent torque means  (A) minimum of the static torque with the phase winding excited (B) maximum of the static torque with the phase winding excited (C) minimum of ... torque with the phase winding unexcited (D) maximum of the static torque with the phase winding unexcited

Last Answer : In a stepper motor, the detent torque means maximum of the static torque with the phase winding unexcited

Description : The number of poles of 8/6 stepper motor can be :

Last Answer : The number of poles of 8/6 stepper motor can be : 4

Description : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min (A) 100 rpm (B) 200 rpm (C) 400 rpm (D) 800 rpm

Last Answer : The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min 200 rpm

Description : A permanent magnet stepper motor with 8 poles in stator and 6 poles in rotor will have a step angle of (a) 7.5° (b) 15° (c) 30° (d) 60°

Last Answer : d

Description : A 3 stack stepper motor with 12 number of rotor teeth has a step angle of: (A) 12° (B) 8° (C) 24° (D) 10°

Last Answer : A 3 stack stepper motor with 12 number of rotor teeth has a step angle of: 10°

Description : An 1.8° step, 4 -phase stepper motor has 40 teeth on 8 poles of the stator. The number of rotor teeth for their rotor will be: (A) 40 (B) 50 (C) 100 (D) 80

Last Answer : An 1.8° step, 4 -phase stepper motor has 40 teeth on 8 poles of the stator. The number of rotor teeth for their rotor will be: 50

Description : With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Last Answer : c.Digitizers may be used as interactive input devices