The material with lowest resistivity is (A) constantan. (B) silver. (C) manganin. (D) nichrome.

The material with lowest resistivity is
(A) constantan. (B) silver.
 (C) manganin. (D) nichrome.
by

1 Answer

Answer :

(B) silver.
by

Related questions

Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Description : Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Last Answer : (D) Brass.

Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Description : The heating elements of electric irons are made of (A) Copper. (B) Nichrome. (C) Constantan. (D) Aluminium.

Last Answer : (B) Nichrome.

The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Description : The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Last Answer : (C) Silver.

Manganin is an alloy of (A) copper, manganese and nickel. (B) copper and manganese. (C) manganese and nickel. (D) manganese, aluminium and nickel.

Description : Manganin is an alloy of (A) copper, manganese and nickel. (B) copper and manganese. (C) manganese and nickel. (D) manganese, aluminium and nickel.

Last Answer : (A) copper, manganese and nickel.

Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Description : Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Last Answer : (B) low resistivity conducting materials.

The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Description : The material used in the filament of electric bulbs is (A) Nichrome (B) Tungsten (C) Constantan (D) German silver

Last Answer : (B) Tungsten

Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Last Answer : (B) Resistivity

Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Description : Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Last Answer : (B) temperature.

__________ does not contain copper as an alloying element, (A) Nichrome (B) Manganin (C) Perminvar (D) Monel metal

Description : __________ does not contain copper as an alloying element, (A) Nichrome (B) Manganin (C) Perminvar (D) Monel metal

Last Answer : (A) Nichrome

The conductivity of copper is less than that of silver by (A) 5 – 10 %. (B) 50 – 60 %. (C) 80 – 90 %. (D) 20 – 30 %.

Description : The conductivity of copper is less than that of silver by (A) 5 – 10 %. (B) 50 – 60 %. (C) 80 – 90 %. (D) 20 – 30 %.

Last Answer : (A) 5 – 10 %.

Bronze is an alloy of (A) copper. (B) aluminium. (C) silver. (D) carbon.

Description : Bronze is an alloy of (A) copper. (B) aluminium. (C) silver. (D) carbon.

Last Answer : (A) copper.

Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Description : Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Last Answer : (D) Grain orientation of material.

In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Description : In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Description : Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Last Answer : (C) Tungsten.

Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Description : Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Last Answer : (D) Both insulating and dielectric material.

A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Description : A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Last Answer : (B) an insulator.

Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Description : Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Last Answer : (A) ferromagnetic material.

Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

An alloy used as thermocouple material comprises of 40% nickel and60% copper. It is called(A) Constantan(B) Kanthal(C) Chromel(D) German silver

Description : An alloy used as thermocouple material comprises of 40% nickel and60% copper. It is called (A) Constantan (B) Kanthal (C) Chromel (D) German silver

Last Answer : (A) Constantan

Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Description : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Last Answer : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is ` ... wire, what will be the current in the wire ?

Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Description : Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Last Answer : Ans:(d)

What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : (4) Nichrome Explanation: Nichrome is a non-magnetic alloy of nickel, chromium, and often iron, usually used as a resistance wire. Patented in 1905, it is the oldest documented form of resistance heating ... is corrosion-resistant, and has a high melting point of about 1400 degree C (2552 degree F).

What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Description : What material is used to make electric heater coil ? (1) Copper (2) Iron (3) Silver (4) Nichrome

Last Answer : Nichrome

The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Description : The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Last Answer : D) Covalent

What is a modular system? List the important properties of a modular system.

Description : What is a modular system? List the important properties of a modular system.

Last Answer : Ans: A modular system consists of well defined manageable units to well defined interfaces among them. Desirable properties are Each module is a well defined subsystem useful to others Each module ... modules Modules should be easier to use than build Modules should have a simple interface

State the functions of a fuse. Mention the desirable properties of fuse materials.

Description : State the functions of a fuse. Mention the desirable properties of fuse materials.

Last Answer : Ans: Fuse is a protective device, which consists of a thin wire or strip. This wire or strip is placed with the circuit it has to protect, so that the circuit-current flows through it. When ... silver and silver alloys are used of lower ratings. Copper alloys are used in fuses of higher ratings.

Give four examples of natural insulating materials.

Description : Give four examples of natural insulating materials.

Last Answer : Ans: Examples of the natural insulating materials are cotton, rubber, wood, mica.

Classify plastic materials into two categories, describe their important properties and give two examples of each.

Description : Classify plastic materials into two categories, describe their important properties and give two examples of each.

Last Answer : Ans: Plastic materials can be classified into thermoplastic and thermosetting plastics. Thermoplastic materials:- The properties of these plastic materials do not change considerably if they are melted ... forming elastic threads and films. Examples are Phenol formaldehyde (Bakelite), Epoxy resins.

Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Description : Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Last Answer : (D) All the above.

Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Description : Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Last Answer : (A) Negative

Atoms with four valence electrons are good conductors. (A) True (B) False

Description : Atoms with four valence electrons are good conductors. (A) True (B) False

Last Answer : (B) False

Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Description : Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Last Answer : (C) A large energy gap.

Paper is hygroscopic and absorbent. (A) True (B) False

Description : Paper is hygroscopic and absorbent. (A) True (B) False

Last Answer : (A) True

Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Description : Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Last Answer : (A) provide path to magnetic flux.

Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.

Description : Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.

Last Answer : (B) free electrons.

Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Description : Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Last Answer : (B) Semiconductors.

Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Description : Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Last Answer : (A) Permanent magnets.

A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Description : A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Last Answer : (B) Two p-n junction.

Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Description : Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Last Answer : (A) Copper and Tin.

Number of Terminals in a MOSFET are (A) Two (B) Three (C) Four (D) Five

Description : Number of Terminals in a MOSFET are (A) Two (B) Three (C) Four (D) Five

Last Answer : (B) Three

When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Description : When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Last Answer : (A) acquire negative charge.

The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Description : The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Last Answer : (B) increases with temperature.

P-N junction is (A) a rectifier. (B) an amplifier. (C) an Oscillator. (D) a Coupler.

Description : P-N junction is (A) a rectifier. (B) an amplifier. (C) an Oscillator. (D) a Coupler.

Last Answer : (A) a rectifier.

What is the type of bonding in silicon? (A) Ionic. (B) Covalent. (C) Metallic. (D) Ionic + Metallic

Description : What is the type of bonding in silicon? (A) Ionic. (B) Covalent. (C) Metallic. (D) Ionic + Metallic

Last Answer : (B) Covalent.

Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Description : Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Last Answer : (A) Built up mica.

The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Description : The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Last Answer : (A) SiO2

Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Description : Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Last Answer : (D) Light weight permanent magnets.

Aluminium is (A) Silvery white in colour. (B) Yellow in colour. (C) Reddish in colour. (D) Pale yellow in colour.

Description : Aluminium is (A) Silvery white in colour. (B) Yellow in colour. (C) Reddish in colour. (D) Pale yellow in colour.

Last Answer : (A) Silvery white in colour.