Semi-conductors have ________ temperature coefficient of resistance.
(A) Negative (B) Positive
(C) Both positive and negative (D) None of the above

1 Answer

Answer :

(A) Negative

Related questions

Description : Permanent magnets are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) semi conductors. (D) super conductors.

Last Answer : (B) hard magnetic materials.

Description : Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Last Answer : (C) dielectric materials.

Description : The property due to which the resistance of some metal or compound vanishes under certain conditions is (A) Semi conductivity. (B) Super conductivity. (C) Curie point. (D) Magnetostriction.

Last Answer : (B) Super conductivity.

Description : Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Last Answer : (B) temperature.

Description : When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Last Answer : (A) acquire negative charge.

Description : In p-type semiconductor the majority carriers are (A) holes. (B) electrons. (C) positive ions. (D) negative ions.

Last Answer : (A) holes.

Description : Atoms with four valence electrons are good conductors. (A) True (B) False

Last Answer : (B) False

Description : Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Last Answer : (B) Semiconductors.

Description : Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Last Answer : (A) Permanent magnets.

Description : Plastics are (A) Good conductors of heat. (B) Good conductors of electricity. (C) Bad conductors of electricity. (D) High density.

Last Answer : (C) Bad conductors of electricity.

Description : Ceramics are good (A) insulators. (B) conductors. (C) superconductors. (D) semiconductors.

Last Answer : (A) insulators.

Description : The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Last Answer : (A) soft magnetic materials.

Description : Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Last Answer : (C) magnetic materials.

Description : In n type semi conductor added impurity is (A) pentavalent. (B) divalent. (C) tetravalent. (D) trivalent.

Last Answer : (A) pentavalent.

Description : A ferrite core has less eddy current loss than an iron core because ferrites have (A) High resistance. (B) Low resistance. (C) Low permeability. (D) High hysteresis.

Last Answer : (A) High resistance.

Description : Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Last Answer : (D) All the above.

Description : The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Last Answer : (B) increases with temperature.

Description : The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

Last Answer : (B) Curie point

Description : Thermocouples are used for the measurement of (A) humidity. (B) pressure. (C) temperature. (D) density.

Last Answer : (C) temperature.

Description : Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Last Answer : (D) Both insulating and dielectric material.

Description : Certain substances loose their electrical resistance completely at super low temperature. Such, substances are called. (1) Super conductors (2) Semi conductors (3) Dielectrics (4) Perfect conductors

Last Answer : (1) Super conductors Explanation: Superconductors are materials that carry electrical current with little or no resistance when cooled, below a certain temperature. While conventional superconductors need to ... temperature superconductors do so above the boiling point of liquid nitrogen (-196 °C).

Description : Certain substances loose their electrical resistance completely at super low temperature. Such substances are called. (1) Super conductors (2) Semi conductors (3) Dielectrics (4) Perfect conductors

Last Answer : Super conductors

Description : With rise in temperature the resistance of semi-conductors?

Last Answer : With rise in temperature the resistance of semi-conductors decreases.

Description : The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Last Answer : D) Covalent

Description : What is a modular system? List the important properties of a modular system.

Last Answer : Ans: A modular system consists of well defined manageable units to well defined interfaces among them. Desirable properties are Each module is a well defined subsystem useful to others Each module ... modules Modules should be easier to use than build Modules should have a simple interface

Description : State the functions of a fuse. Mention the desirable properties of fuse materials.

Last Answer : Ans: Fuse is a protective device, which consists of a thin wire or strip. This wire or strip is placed with the circuit it has to protect, so that the circuit-current flows through it. When ... silver and silver alloys are used of lower ratings. Copper alloys are used in fuses of higher ratings.

Description : Give four examples of natural insulating materials.

Last Answer : Ans: Examples of the natural insulating materials are cotton, rubber, wood, mica.

Description : Classify plastic materials into two categories, describe their important properties and give two examples of each.

Last Answer : Ans: Plastic materials can be classified into thermoplastic and thermosetting plastics. Thermoplastic materials:- The properties of these plastic materials do not change considerably if they are melted ... forming elastic threads and films. Examples are Phenol formaldehyde (Bakelite), Epoxy resins.

Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Last Answer : (B) Resistivity

Description : Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Last Answer : (D) Brass.

Description : Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Last Answer : (D) Grain orientation of material.

Description : Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Last Answer : (C) A large energy gap.

Description : Paper is hygroscopic and absorbent. (A) True (B) False

Last Answer : (A) True

Description : In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

Description : Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Last Answer : (A) provide path to magnetic flux.

Description : Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.

Last Answer : (B) free electrons.

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

Description : A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Last Answer : (B) Two p-n junction.

Description : Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Last Answer : (A) Copper and Tin.

Description : Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Last Answer : (C) Tungsten.

Description : Number of Terminals in a MOSFET are (A) Two (B) Three (C) Four (D) Five

Last Answer : (B) Three

Description : P-N junction is (A) a rectifier. (B) an amplifier. (C) an Oscillator. (D) a Coupler.

Last Answer : (A) a rectifier.

Description : What is the type of bonding in silicon? (A) Ionic. (B) Covalent. (C) Metallic. (D) Ionic + Metallic

Last Answer : (B) Covalent.

Description : Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Last Answer : (A) Built up mica.

Description : The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Last Answer : (A) SiO2

Description : Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Last Answer : (D) Light weight permanent magnets.

Description : Aluminium is (A) Silvery white in colour. (B) Yellow in colour. (C) Reddish in colour. (D) Pale yellow in colour.

Last Answer : (A) Silvery white in colour.

Description : The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Last Answer : (A) 0.08 to 0.3 %

Description : The most malleable, ductile low resistivity material is (A) Copper. (B) Aluminium. (C) Silver. (D) Iron.

Last Answer : (C) Silver.