Please Log in or Register for more.

Explain the series and parallel operation of MOSFET. Which is suitable and why?

535 views

1 Answer

Answer :

Series operation of MOSFET:

To increase voltage handling capability MOSFETs are connected in series. When the MOSFETs are connected in series each MOSFET should turn on and turn off simultaneously otherwise if one MOSFET is in on or off state and other MOSFETs is in off or on state then it may destroy the MOSFET because of high voltage.




Parallel operation of MOSFET:

To increase current handling capability MOSFETs are connected in parallel. In parallel operation of MOSFET should have same gain, turn on and turn off time and transconductance. Each MOSFET should share current equally.

image 

Like 1 like

Please log in or register to answer this question.

Related Questions


parallel operation of MOSFET can be done more easily as compared to thyristor. why?
Last Answer : Parallel operation of MOSFET can be done more easily as compared to thyristor because the resistance of MOSFET is increases with increase in temperature. MOSFET have the positive temperature coefficient. In ... the parallel operation of MOSFET can be done more easily as compared to the thyristor.

Show More

300 views 1 answer







Also, highlight the problem faced during parallel operation.
Last Answer : Parallel operation of IGBT: Parallel operation of IGBT is done for obtaining high current rating. Paralleling of IGBT reduces conduction losses and thermal stress. IGBT combines the qualities of ... . IGBTs must share losses equally otherwise IGBT may get failure due to thermal differences.

Show More

223 views 1 answer







An additional condition for parallel operation of three-phase transformers over single-phase transformers is that
Last Answer : An additional condition for parallel operation of three-phase transformers over single-phase transformers is that the transformers should belong to the same vector group

Show More

147 views 1 answer







Describe the operation of N channel enhancement type MOSFET with diagram.
Last Answer : As its name indicates, this MOSFET operates only in the enhancement mode and has no depletion mode. It operates with large positive gate voltage only. It does not conduct when the ... of charge carriers attracted to the positive gate. Thus drain current is controlled by the gate potential.

Show More

643 views 1 answer








Last Answer : For the parallel operation of two or more D.C. compound generators, we should ensure that series fields of all generators should be either on positive side or negative side of the armature.

Show More

180 views 1 answer








Last Answer : Necessary conditions required to be satisfied in order to ensure successful parallel operation of single phase transformers:  1. Only transformers having the same phase displacement between primary and secondary ... . 7. The phase sequence must be followed strictly on HV and LV side connection.

Show More

199 views 2 answers







Explain with neat diagram series and parallel magnetic circuits. 
Last Answer : Series magnetic circuit: When different magnetic materials having different lengths, cross sectional areas and permeability are connected one after another, in which same flux is established in different sections, then it is called series ... flux, Φ = Φ1 + Φ2  Path 1: BAFE  Path 2: BACD

Show More

500 views 1 answer







Series parallel resistances problem solution
Last Answer : Series parallel resistances problem solution

Show More

183 views 1 answer







what is equivalent resistance when four 4 Ohm resistors are connected in i) series ii) parallel
Last Answer : equivalent resistance

Show More

372 views 2 answers







Series and parallel capacitor problem
Last Answer : Series and parallel capacitor problem 1 : https://youtu.be/MSl5mRwtjAE Series and parallel capacitor problem 2 : https://youtu.be/yGwbpyEtIyw Series and parallel capacitor problem 3 : https:// ... https://youtu.be/_7KwEwWqiNU Series and parallel capacitor problem 10 : https://youtu.be/et8MCWV_OyE

Show More

109 views 1 answer







State the principle of solar cell. What is necessity of series and parallel connection of solar cells.
Last Answer : Principle of solar cell:-  Working:- Solar cell operates on principle of Photo-voltaic effect Solar cell works in following steps:  The solar cell is composed of a P-type ... of Voltage & Current rating it is necessity of connecting series and parallel connection of solar cells.

Show More

116 views 1 answer







State necessity of series connection and parallel connection of batteries.
Last Answer : Necessity of series connection of batteries: 1. The batteries are available with some specific terminal voltages. e. g. 6V, 12V, 24V, 48V etc. 2. If we want to have some terminal voltage other than ... batteries of capacities I1, I2, I3, I4 . are connected in parallel, all having identical emfs.

Show More

87 views 1 answer







The series and parallel resonance on L-C circuit differs in that?
Last Answer : The series and parallel resonance on L-C circuit differs in that series resistance needs a low-resistance source for sharp rise in current.

Show More

251 views 1 answer







Is more power dissipated in series or parallel?

Show More

68 views 0 answers







Explain switching model of MOSFET.

Show More

75 views 0 answers







Explain MOSFET gate drive circuit and totem pole configuration.
Last Answer : MOSFET gate drive circuit: The turning on and turning off of MOSFET can be controlled from gate to source voltage signal. If the gate to source voltage of MOSFET exceeds threshold ... this configuration, the two switches (transistors) are used in totem pole arrangement with a comparator.

Show More

349 views 1 answer







Explain the formation of parasitic BJT and parasitic diode in Power MOSFET. Can parasitic diode be used in same power electronics applications?
Last Answer : Parasitic Diode: The parasitic diode is in between drain and source. The MOSFET structure itself contains parasitic diode or body drain diode. This parasitic diode allows the reverse flow of current when the ... of MOSFET as a BJT collector. Parasitic BJT operates in the cut-off region.

Show More

2.6k views 1 answer







Explain difference between enhancement MOSFET and depletion type MOSFET.
Last Answer : In enhancement MOSFET channel is not initially exists but in depletion MOSFET channel is already exists. In case of depletion MOSFET if the voltage is applied between drain and source the drain current will flow ... a channel. depletion MOSFET & enhancement MOSFET

Show More

549 views 1 answer







Describe with neat sketch the construction and working principle of MOSFET.
Last Answer : Construction and working principle of MOSFET:  A) Depletion type MOSFET: Construction: The N-channel depletion type MOSFET is formed on P-type silicon substrate with two heavily ... accumulation of electrons and hence more current. Thus the MOSFET is a gate voltage controlled device.

Show More

3.6k views 1 answer







State the applications of MOSFET
Last Answer : Applications of MOSFET: i) Switching-mode-power-supplies (SMPS) and linear power supplies. ii) Brushless DC motor drives iii) Solid state DC relay iv) Automobile applications v) Stepper motor controller vi) Lighting controls vii) Solenoid drivers viii) Robotics ix) Induction heating

Show More

87 views 1 answer







The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of (A) 1.5V (B) 2.5V (C) 3.5V (D) 4.5V
Last Answer : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of 2.5V

Show More

316 views 1 answer







Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown
Last Answer : Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown

Show More

3.2k views 1 answer







Operating frequency of power MOSFET is higher than that of power BJT. Justify the statement.
Last Answer : Power MOSFET have high turning on and turning off capability high switching speed of MOSFET is due to the high rate of change of drain voltage. The switching losses of power MOSFET ... lower frequency. Hence, operating frequency of power MOSFET is higher than that of power BJT.

Show More

984 views 1 answer







Justify the statement. Antiparallel diode is connected across MOSFET.
Last Answer : In MOSFET current is flow from drain to source but when the load is inductive the current may flow in opposite direction. To avoid the opposite flow of current and to protect MOSFET the antiparallel diode is connected across MOSFET.

Show More

161 views 1 answer







Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses. 
Last Answer : MOSFET is metal oxide field effect transistor. MOSFET is a voltage controlled device. MOSFET is majority carrier device. MOSFET are of two one is n-channel MOSFET and p-channel MOSFET. Gate, ... . Hence, power MOSFET is operated at high enough gate-source voltage to minimize the conduction losses.

Show More

842 views 1 answer







Compare BJT, MOSFET and IGBT .
Last Answer : BJT MOSFET IGBT BJT is a current controlled device. MOSFET is a voltage controlled device. IGBT is a voltage controlled device. The input impedance of BJT is low. ... is minority carrier device. MOSFET is majority carrier device. IGBT is minority carrier device.

Show More

449 views 1 answer








Last Answer : Because it has a higher switching frequency and heat tolerance.

Show More

143 views 1 answer







What is depletion type MOSFET?..........
Last Answer : Depletion MOSFET: Depletion MOSFET is a MOSFET in which the channel already exists. If we apply a voltage between drain and source then the drain current will flow even if the gate to source ... in figure. The drain current will be reduced as the gate to source voltage made more negative.

Show More

189 views 1 answer







What is enhancement MOSFET?...............
Last Answer : Enhancement MOSFET: There are two types of MOSFET one is enhancement MOSFET and second is depletion MOSFET. In enhancement MOSFET channel is created by applying threshold voltage between gate and source ... mode. The enhancement MOSFET will not conduct if the gate to source voltage is zero.

Show More

175 views 1 answer








Last Answer : ON state losses of IGBT is less as compared to MOSFET and BJT.

Show More

142 views 1 answer








Last Answer : No, MOSFET is not the curent controlled device. The current between drain and source which is drain current is controlled by applying a voltage between gate and source hence MOSFET is a voltage controlled device. 

Show More

201 views 1 answer








Last Answer : already answered here is mosfet current controlled device?

Show More

172 views 1 answer








Last Answer : MOSFET provides better efficiency at high frequency and its high speed switching losses are less hence MOSFET is used for high frequency.

Show More

114 views 1 answer







With neat sketch explain four modes of operation of a TRIAC? 
Last Answer : Modes of operation of a TRIAC: There are four different operating modes of TRIAC:  1) MT2 and gate are positive with respect to terminal MT1(Mode1) : Here terminal MT2 is positive ... junction P2-N2 is forward biased, current carriers are injected and therefore, the TRIAC is turned on. 

Show More

447 views 1 answer







Explain the operation of UPS with a neat block diagram.
Last Answer : Uninterruptible-Power-Supplies (UPS): A block diagram of UPS system is shown in figure. It essentially consists of four major components: i)Rectifier (or battery charger) ii) ... . Due to fast action requirement, transfer switch can be implemented by fast acting semiconductor devices.

Show More

3.3k views 1 answer







Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 
Last Answer : Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 

Show More

109 views 1 answer







A four -quadrant operation requires two full converters connected in  (1) Series (3) Back to back (2) Parallel (4) Series Cascade
Last Answer : A four-quadrant operation requires two full converters connected in Parallel 

Show More

886 views 1 answer







Explain series switching control of AC load. Single phase resistance load - Integral half cycle control Phase control - Resistance load

Show More

65 views 0 answers







State advantages of MOSFET.
Last Answer : Advantages of MOSFET * MOSFETs provide greater efficiency while operating at lower voltages. * Absence of gate current results in high input impedance. * High switching speed. * They operate at lower ... due to lower resistance of channel. * They are easy to manufacture. * They are portable.

Show More

106 views 1 answer













What parameters are to be considered when choosing a MOSFET?

Show More

55 views 0 answers







Compare JFET with MOSFET.
Last Answer : Particulars JFET MOSFET 1) Type Voltage controlled device Voltage controlled device 2) Mode of operation Operates only in depletion mode Operates in depletion and enhancement ... 6) Gate connection Not isolated from substrate Isolated by SiO2 layer from substrate

Show More

108 views 1 answer







A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of 600 C/W. If the ambient temperature is 300o C ... the device will be A) 1.52 W B) 1.72 W C) 1.92W D) 2.00 W
Last Answer : A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of  ... 300o C, then the maximum allowable power dissipation in the device will be 2.00 W 

Show More

149 views 1 answer







When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) When the Drain voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage 
Last Answer : When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) ... voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage 

Show More

109 views 1 answer







A MOSFET has how many terminals?
Last Answer : A MOSFET having three terminals 1st one is Gate (insulated), 2nd one is Source and 3rd one is Drain.

Show More

217 views 3 answers







What is the transconductance of a MOSFET?

Show More

60 views 0 answers







What is meant by pinch off voltage in MOSFET?

Show More

102 views 0 answers







What is channel length modulation in MOSFET?
Last Answer : Shortening of lenght of the inverted channel region with increase in drain bias for large drain biases due to which current increases with drain bias and output resistance decreases is called channel length modulation in MOSFET.

Show More

313 views 2 answers







What is meant by body effect in MOSFET?

Show More

66 views 0 answers







How can we check a Mosfet?

Show More

72 views 0 answers






Show More⇦ PreviousNext ⇨