The -------can conduct current in either direction and is turned-on when the breakover voltage is exceeded...

The -------can conduct current in either direction and is turned-on when the breakover voltage is exceeded 

A) SCR B) Diac  C) SCS D) Traic
by

1 Answer

Answer :

The diac  can conduct current in either direction and is turned-on when the breakover voltage is exceeded.

by

Related questions

A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Description : A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Last Answer : Peak Inverse Voltage (PIV).

When was a time you were looking forward to something and it actually exceeded your expectations?

Description : When was a time you were looking forward to something and it actually exceeded your expectations?

Last Answer : Doom Eternal. Also the recent Risk of Rain 2 dlc

Has the costs of the Coronavirus pandemic exceeded the cost of the subprime mortgage crisis?

Description : Has the costs of the Coronavirus pandemic exceeded the cost of the subprime mortgage crisis?

Last Answer : 628,000 dead in USA you do the math ! !

Who here can consistently emerge from the holiday season without having exceeded their budget.

Description : Who here can consistently emerge from the holiday season without having exceeded their budget.

Last Answer : That’s easy to do – just don’t make a budget! :-)

What destinations have you visited that exceeded your expectations & which were perhaps not what you envisaged?

Description : What destinations have you visited that exceeded your expectations & which were perhaps not what you envisaged?

Last Answer : answer:Better- Northern Wisconsin. I discovered a little town in northern Wisconsin when planning our first family vacation over 10 years ago. We originally planned on visiting Wisconsin Dells, but I wanted something a ... (sorry NYC fans) It was way too crowded for my liking, plus it smelled. :(

When restoring a classic vehicle,is there a percentage of restoration not be be exceeded ?

Description : When restoring a classic vehicle,is there a percentage of restoration not be be exceeded ?

Last Answer : i consider it a restoration if you’re going for a stock look. easier has nothing to do with classics

I have a Problem with my Gmail Account,I get this error message:The server returned the error: Account exceeded bandwidth limits. (Failure)What should i do?

Description : I have a Problem with my Gmail Account,I get this error message:The server returned the error: Account exceeded bandwidth limits. (Failure)What should i do?

Last Answer : First thing I would do is check the status of the free-space in your inbox. There should be a bar at the bottom of your screen saying how many gigs of space you have used / have left. If that is full, ... that you don't need anymore. If space isn't the problem, then I don't know what is. Good luck!

What does it. Mean when scratch off ticket says terminal threshold exceeded?

Description : What does it. Mean when scratch off ticket says terminal threshold exceeded?

Last Answer : That it has already been cashed.

Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Description : Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Last Answer : Answer: B

Two AC generators of the same capacity are operating in parallel. One with a zero speed droop setting and the other with a 5% speed droop. If its capacity is not exceeded, the unit whose governor has the zero speed droop setting will _____________. A. assume the smaller share of the load B. maintain the frequency of the system C. have poor sensitivity characteristics D. have poor power response

Description : Two AC generators of the same capacity are operating in parallel. One with a zero speed droop setting and the other with a 5% speed droop. If its capacity is not exceeded, the unit whose ... B. maintain the frequency of the system C. have poor sensitivity characteristics D. have poor power response

Last Answer : Answer: B

Which plant parameters shown in the illustration would produce an alarm if they exceeded preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. TO RDCN. GR. B. L.O. PRESS. TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG. and L.O. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Description : Which plant parameters shown in the illustration would produce an alarm if they exceeded preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. TO RDCN. GR. B. L.O. PRESS. TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG. and L.O. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Last Answer : Answer: D

What is critical angle of attack and what will happen when it is exceeded?

Description : What is critical angle of attack and what will happen when it is exceeded?

Last Answer : The angle of attack which produces the maximum lift coefficient is called as the critical angle of attack. It is also called as the "stall angle of attack". At the critical angle of attack ... becomes more and more fully separated and the airfoil produces less coefficient of lift and will stall.

Which one of the following statements is true? a. Independ. Quality planning enables the project manager to manage the trade-off between customer expectations and budgetdent reviews and quality audits form part of quality assurance to ensure the project manager delivers on time and to budget. b. Quality assurance provides confidence to stakeholders that requirements for quality will be exceeded. c. Quality control verifies that the project deliverables conform to specification, are fit for purpose and meet stakeholder expectations.

Description : Which one of the following statements is true? a. Independent reviews and quality audits form part of quality assurance to ensure the project manager delivers on time and to budget. ... Quality planning enables the project manager to manage the trade-off between customer expectations  and budget

Last Answer : c. Quality control verifies that the project deliverables conform to specification, are fit for purpose and  meet stakeholder expectations.

At ‘yield point’ of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become plastic C. even the plastic stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Description : At yield point' of a copper wire A. the load hasn't exceeded the elastic limit yet; so, Hooke's law applies B. the load has already exceeded the elastic limit and the material has become ... stage has passed and the wire has snapped already D. Like Brass and Bronze, Copper has no yield poin

Last Answer : the load has already exceeded the elastic limit and the material has become plastic

Hooke's law states that A. the extension is proportional to the load when the elastic limit is not exceeded B. the extension is inversely proportional to the load when the elastic limit is not exceeded C. the extension is independent of the load when the elastic limit is not exceeded D. load is dependent on extension

Description : Hooke's law states that A. the extension is proportional to the load when the elastic limit is not exceeded B. the extension is inversely proportional to the load when the elastic limit is not ... is independent of the load when the elastic limit is not exceeded D. load is dependent on extension

Last Answer : the extension is proportional to the load when the elastic limit is not exceeded

Which one of the following statements is true? a. Independent reviews and quality audits form part of quality assurance to ensure the project manager delivers on time and to budget. b. Quality assurance provides confidence to stakeholders that requirements for quality will be exceeded. c. Quality control verifies that the project deliverables conform to specification, are fit for purpose and meet stakeholder expectations. d. Quality planning enables the project manager to manage the trade-off between customer expectations and budget.

Description : Which one of the following statements is true?  a. Independent reviews and quality audits form part of quality assurance to ensure the project  manager delivers on time and to budget. ... planning enables the project manager to manage the trade-off between customer  expectations and budget.

Last Answer : c. Quality control verifies that the project deliverables conform to specification, are fit for  purpose and meet stakeholder expectations.

The flow-mass curve is graphical representation of (A) Cumulative discharge and time (B) Discharge and percentage probability of flow being equalled or exceeded (C) Cumulative discharge, volume and time in chronological order (D) Discharge and time in chronological order

Description : The flow-mass curve is graphical representation of (A) Cumulative discharge and time (B) Discharge and percentage probability of flow being equalled or exceeded (C) Cumulative discharge, volume and time in chronological order (D) Discharge and time in chronological order

Last Answer : Answer: Option C

After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Description : After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Last Answer : Oxide shedding. At temperatures above 130º F, oxide coating becomes soft and sheds.

What six types of environmental damage can occur to tapes in storage when the ideal temperature and humidity ranges are exceeded?

Description : What six types of environmental damage can occur to tapes in storage when the ideal temperature and humidity ranges are exceeded?

Last Answer : Tape deformation, oxide shedding, head-to-tape sticking, layer to-layer sticking, dirt build-up, and excessive tape and head wear.

When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Description : When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Last Answer : a. Rapid descent when AC descends below cabin altitude

Which protocol carries messages such as destination Unreachable, Time Exceeded, Parameter Problem, Source Quench, Redirect, Echo, Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply? * ICMP * UDP * TCP * TFTP

Description : Which protocol carries messages such as destination Unreachable, Time Exceeded, Parameter Problem, Source Quench, Redirect, Echo, Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply? * ICMP * UDP * TCP * TFTP

Last Answer : Correct answer: A ICMP (Internet Control Message Protocol) is a network layer internet protocol described in RFC # 792. ICMP reports IP packet information such as destination Unreachable, Time ... Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply.

When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Description : When would the negative differential limits be reached/exceeded? a. Rapid descent when AC descends below cabin altitude b. During ground pressure testing c. Rapid ascent when aircraft climbs d. When changing to manual operation

Last Answer : a. Rapid descent when AC descends below cabin altitude

Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded

Last Answer : E. Elastic limit was exceeded

The average marks obtained by a student in Tamil, english, maths, science, and social together is 65% above the average mark obtained in maths and science together. How many more marks exceeded by the average of maths and science together than the sum of the tamil and english together? A) 50 B) 65 C) Data insufficient D) None of these

Description : The average marks obtained by a student in Tamil, english, maths, science, and social together is 65% above the average mark obtained in maths and science together. How many more marks exceeded by the average of ... of the tamil and english together? A) 50 B) 65 C) Data insufficient D) None of these

Last Answer : C) According to the question  There is no other information about the marks in any one of the subject. The data gives is insufficient to answer the question.

In a 3-phase converter circuit during commutation when one SCR in one phase is turned on to turn-off an SCR

Description : In a 3-phase converter circuit during commutation when one SCR in one phase is turned on to turn-off an SCR in another phase, results in (A) voltage notching (B) harmonic distortion (C) voltage sag (D) voltage swell

Last Answer : In a 3-phase converter circuit during commutation when one SCR in one phase is turned on to turn-off an SCR in another phase, results in voltage notching

can a DIAC conduct in both direction?

Last Answer : Yes DIAC can conduct in both direction.

The purpose of the bias winding in figure 'B' shown in the illustration is for ____________. EL-0091 A. changing the direction of current in the control winding B. setting the operating point of the device C. allowing the use of either AC or DC in the load circuit D. changing the direction of current through the load

Description : The purpose of the bias winding in figure 'B' shown in the illustration is for ____________. EL-0091 A. changing the direction of current in the control winding B. setting the operating point of the ... use of either AC or DC in the load circuit D. changing the direction of current through the load

Last Answer : Answer: B

When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Last Answer : c. equal in magnitude

If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A. Reverse the 60 Hz supply connections to 'S1' and 'S2'. B. No action is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Description : If coils 'R1-R2-R3' at the receiver of figure 'B' shown in the illustration turned opposite of those in the transmitter, what corrective action should be taken to have both turn in the same direction? EL-0092 A ... is needed. C. Interchange leads 'R1' and 'R3'. D. Interchange leads 'R2' and 'R3'.

Last Answer : Answer: C

Anil after travelling 6 km towards East from his house realized that he has travelled in a wrong direction, lie turned and travelled 12 km towards West, turned right and travelled 8 km to reach his office. The straight distance of the office from his house is: (A) 20 km (B) 14 km (C) 12 km (D) 10 km

Description : Anil after travelling 6 km towards East from his house realized that he has travelled in a wrong direction, lie turned and travelled 12 km towards West, turned right and travelled 8 km to reach his office. The straight distance of the office from his house is: (A) 20 km (B) 14 km (C) 12 km (D) 10 km

Last Answer : Answer: D

Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Description : Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Last Answer : Definition of parameters of OPAMP is follows:  i) Input Offset Voltage: Input offset voltage is defined as the voltage that must be applied between the two input terminals of an OPAMP to null or ... to ground) and output voltage is obtained non zero such voltage is output offset voltage of opamp.

Pinch off voltage of a J FET is the drain to source voltage above which drain current.

Description : Pinch off voltage of a J FET is the drain to source voltage above which drain current. • Increases • Decreases • Remains constant • Becomes zero

Last Answer : Pinch off voltage of a J FET is the drain to source voltage above which drain current Remains constant

A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = _:

Description : A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = _:  (1) Zero (2) Infinity (3) L/R (4) R/L 

Last Answer : A step voltage E is applied to a series R-L circuit. The rate of change of current is maximum at t = Zero.

The voltage across a capacitor _____ the current through it by ______

Last Answer : The voltage across a capacitor Lags the current through it by 90

For a pure capacitor, the voltage current relationship is:

Last Answer : For a pure capacitor, the voltage-current relationship is: Voltage lags current by 90*

MOSFET are current controlled or voltage controlled devices?

Last Answer : MOSFET  are voltage controlled devices.

Is BJT current controlled or voltage controlled?

Last Answer : BJT is current controlled device.

LED starts to conduct when voltage is about A. 1 V B. 4 V C. 3 V D. 2 V

Description : LED starts to conduct when voltage is about A. 1 V B. 4 V C. 3 V D. 2 V

Last Answer : 2 V

An ac voltage is applied across a diode. The tube will conduct when

Description : An ac voltage is applied across a diode. The tube will conduct when

Last Answer : Positive.

Constant voltage transmission entails the following disadvantage (a) large conductor area is required for same power transmission (b) short-circuit current of the system is increased (c) either of the above (d) none of the above

Description : Constant voltage transmission entails the following disadvantage (a) large conductor area is required for same power transmission (b) short-circuit current of the system is increased (c) either of the above (d) none of the above

Last Answer : (b) short-circuit current of the system is increased

The direction of rotation of the winch shown in the illustration is changed by reversing the _____________. EL-0102 A. direction of current through the shunt field B. polarity of voltage at 'S1' and 'S2' C. direction of current through the armature D. polarity of voltage at 'L1' and 'L2'

Description : The direction of rotation of the winch shown in the illustration is changed by reversing the _____________. EL-0102 A. direction of current through the shunt field B. polarity of voltage at 'S1' and 'S2' C. direction of current through the armature D. polarity of voltage at 'L1' and 'L2'

Last Answer : Answer: C

Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Description : Capacitance in an AC circuit will _____________. A. stop current flow once the capacitor is fully charged B. allow current flow in only one direction C. oppose any change in circuit voltage D. rectify the current

Last Answer : Answer: C

In the left hand rule, forefinger always represents (a) voltage (b) current (c) magnetic field (d) direction of force on the conductor

Description : In the left hand rule, forefinger always represents (a) voltage (b) current (c) magnetic field (d) direction of force on the conductor

Last Answer : (c) magnetic field

If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1-S2-S3' turn faster because of induced currents B. ring at the receiving station until the turning stops C. receive a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Description : If coil 'R1-R2' on the transmitter in figure 'A' shown in the illustration is turned 30 degrees clockwise, corresponding coil 'R1-R2' on the receiver should ____________. EL-0092 A. make coils 'S1 ... a higher voltage depending on the turns ratio D. align itself to the same position if free to move

Last Answer : Answer: D

What is the amplitude and voltage induced into the rotor when the CX is turned 90º while the CT remains on electrical zero?

Description : What is the amplitude and voltage induced into the rotor when the CX is turned 90º while the CT remains on electrical zero?

Last Answer : The voltage is maximum and in phase with the ac excitation voltage to the CX.

What is the direction of data bus?

Last Answer : Bidirectional

Why does cesium bromide in an aqueous solution conduct electric current?

Description : Why does cesium bromide in an aqueous solution conduct electric current?

Last Answer : Cesium bromide is dissociated in water in ions.

Super conductors are substances that – (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Description : Super conductors are substances that – (1) offer minimum resistance to flow of electric current (2) conduct electricity at low temperature (3) conduct electricity at high temperature (4) offer high resistance to the flow of electric current

Last Answer : (1) offer minimum resistance to flow of electric current Explanation: A superconductor is a material that can conduct electricity or transport electrons from one atom to another with no ... is released from the material when it reaches the temperature at which it becomes superconductive.