In which region is the operating point stable in tunnel diodes?

In which region is the operating point stable in tunnel diodes? 

(1) Negative-resistance (2) Positive-resistance (3) Both negative- and positive-resistance (4) Neither negative- nor positive-resistance
by

1 Answer

Answer :

In Negative-resistance region is the operating point stable in tunnel diodes.

by

Related questions

Which of the following diodes is limited to the reverse-bias region in its region of operation?

Description : Which of the following diodes is limited to the reverse-bias region in its region of operation?  (1) Schottky (2) Tunnel (3) Photodiode (4) Rectifier

Last Answer : Photodiode is limited to the reverse-bias region in its region of operation.

Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Description : Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Last Answer : Answer: D

Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Description : Heat sinks are frequently used with _____________. A. power transistors B. vacuum tubes C. tunnel rectifier diodes D. all of the above

Last Answer : Answer: A

What resistance property is found in tunnel diodes but not in normal diodes?

Description : What resistance property is found in tunnel diodes but not in normal diodes?

Last Answer : Negative resistance.

What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Description : What is the main difference in construction between normal PN junction diodes and tunnel diodes?

Last Answer : The amount of doping.

What causes the negative-resistance property of tunnel diodes?

Description : What causes the negative-resistance property of tunnel diodes?

Last Answer : The tunneling action

What causes diodes to fail in alternator?

Description : What causes diodes to fail in alternator?

Last Answer : alternator

in which BJT operating region both the junctions are reverse biased?

Last Answer : In cut-off region of BJT both the emitter-base junction and collector-base junction are reverse biased.

Draw the characteristics of tunnel diode, showing operating regions. State two applications of tunnel diode.

Description : Draw the characteristics of tunnel diode, showing operating regions. State two applications of tunnel diode.

Last Answer : Applications: One of the important application of a tunnel diode is in high speed computers where the switching times in the order of nanoseconds or picoseconds are desirable. A tunnel diode can be ... In digital networks. 2. As a high speed switch. 3. As a high frequency oscillator.

The multivibrator circuit which processes one stable state and one quasi stable is

Description : The multivibrator circuit which processes one stable state and one quasi stable is   (a) Astabel (b) Monostable (c) Bistable (d) Schmitt trigger circuit

Last Answer : The multivibrator circuit which processes one stable state and one quasi stable is Monostable 

The crystal oscillator frequency is very stable due to

Last Answer : The crystal oscillator frequency is very stable due to High Q of the crystal.

Why is the operating point selected at the Centre of the active region?

Description : Why is the operating point selected at the Centre of the active region?

Last Answer : The operating point is selected at the Centre of the active region to get to perfect amplification. Moreover there is no distortion.

If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the input signal C) Need for high dc collector supply D) Clipping of output in the negative half of the input signal

Description : If the operating point of an NPN transistor amplifier is selected in saturation region, it is likely to result in A) Thermal runaway of transistor B) Clipping of output in the positive half of the ... for high dc collector supply D) Clipping of output in the negative half of the input signal

Last Answer : B) Clipping of output in the positive half of the input signal

The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 5 3 5 3 5 3 5 3 5 5 3 3 5 3 5 3 Region to be amplified . (a) B - denaturation at a temperature of about 98°C separating the two DNA strands (b) A - denaturation at a temperature of about 50°C (c) C - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers

Description : The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 ... - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers

Last Answer : (c) C - extension in the presence of heat stable DNA polymerase

When a company leases a warehouse to serve a region of the market that is not large enough and stable enough to make a long -term commitment to fixed warehousing facilities, it is employing a: A)flexible warehouse. B)dispatching centre. C)distribution centre. D)private warehouse. E)public warehouse.

Description : When a company leases a warehouse to serve a region of the market that is not large enough and stable enough to make a long -term commitment to fixed warehousing facilities, it is ... A)flexible warehouse. B)dispatching centre. C)distribution centre. D)private warehouse. E)public warehouse.

Last Answer : D)private warehouse

Since the characteristics of the device shown in figure 'A' of the illustration includes a stable voltage and low current while operating, it can be suitably used in _____________. EL-0065 A. oscillators and SCR trigger circuits B. class A and B amplifiers C. generator rectifier and filtering supplies D. all of the above

Description : Since the characteristics of the device shown in figure 'A' of the illustration includes a stable voltage and low current while operating, it can be suitably used in _____________. EL-0065 A. oscillators ... . class A and B amplifiers C. generator rectifier and filtering supplies D. all of the above

Last Answer : Answer: A

Should I use diodes?

Description : Should I use diodes?

Last Answer : So you have three camera flashes that are attached to a single capacitor, or three camera flashes attached to different capacitors?

which of the following accurately describes junction diodes? -General Knowledge

Description : which of the following accurately describes junction diodes? -General Knowledge

Last Answer : A semiconductor rectifying device in which the barrier between the two regions of opposite conductivity (n-type and p-type) type produces the rectification: accurately describes junction diodes.

How many types of diodes ?

Description : How many types of diodes ?

Last Answer : 2 types of diodes

Are diodes polarity sensitive?

Description : Are diodes polarity sensitive?

Last Answer : Need answer

For which one of the following, 'Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, 'Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : (1) Rectification Explanation: In electronics, a diode is an electronic device that allows current to flow in one direction only. It is mainly used as a rectifier diode that lets ... used for power supply operation. Rectifier diodes are used for changing alternating current into direct current.

For which one of the following, "Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, "Diodes' are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : (1) Rectification Explanation: A rectifier diode is a two-lead semiconductor that allows current to pass in only one direction. Many types of diodes are used for a wide range of applications. Rectifier diodes are a vital component in power supplies

Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Description : Light Emitting Diodes (LED) is used in fancy electronic devices such as toys emit (1) X-rays (2) ultraviolet light (3) (4) All of the above (4) radio waves

Last Answer : (4) All of the above Explanation: A light-emitting diode (LED) is a semiconductor light source that emits light when current flows through it. Infrared LEDs are used in remote-control circuits, such as those used with a wide variety of consumer electronics.

A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Description : A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Last Answer : (4) a single transistor Explanation: In digital logic, an inverter or NOT gate is a logic gate which implements logical negation. An inverter circuit outputs a voltage representing the opposite ... be constructed using a single NMOS transistor or a single PMOS transistor coupled with a resistor.

In the illustrated circuit, if the input to leads 'B' and 'Y' was 24 VDC the output between 'A' and 'X' will be _________. EL-0069 A. 24 VDC B. 22.8 VDC, 24 VDC minus the 1.2 VDC voltage drop across two diodes C. undeterminable without knowing the turns ratio of the transformer D. 0 VDC

Description : In the illustrated circuit, if the input to leads 'B' and 'Y' was 24 VDC the output between 'A' and 'X' will be _________. EL-0069 A. 24 VDC B. 22.8 VDC, 24 VDC minus the 1.2 VDC voltage drop across two diodes C. undeterminable without knowing the turns ratio of the transformer D. 0 VDC

Last Answer : Answer: D

Routine maintenance of a ship's service alternator should include ______________. A. changing the pedestal bearing insulation yearly B. megger testing of all rectifying diodes C. lubricating excitation slip rings D. periodic cleaning of the air filters or screens

Description : Routine maintenance of a ship's service alternator should include ______________. A. changing the pedestal bearing insulation yearly B. megger testing of all rectifying diodes C. lubricating excitation slip rings D. periodic cleaning of the air filters or screens

Last Answer : Answer: D

Which of the devices listed is indicated by the symbols lettered 'A' to 'F', shown in the illustration? EL-0016 A. Diodes B. Linear inductors C. Capacitors D. Transistors

Description : Which of the devices listed is indicated by the symbols lettered 'A' to 'F', shown in the illustration? EL-0016 A. Diodes B. Linear inductors C. Capacitors D. Transistors

Last Answer : Answer: A

High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Description : High vacuum diodes, gas-filled diodes, and germanium semiconductor diodes may all be used as _____________. A. potentiometers B. rectifiers C. power sources D. photocells

Last Answer : Answer: B

The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Description : The use of four diodes, in a full-wave bridge rectifier circuit, will __________. A. provide unidirectional current to the load B. allow a very high leakage current from the load C. convert direct current to alternating current D. offer high opposition to current in two directions

Last Answer : Answer: A

What types of inverters require feedback diodes?

Description : What types of inverters require feedback diodes?

Last Answer : VSI with RL load.

Why diodes should be connected in antiparallel with the thyristors in inverter circuits?

Description : Why diodes should be connected in antiparallel with the thyristors in inverter circuits?

Last Answer : For RL loads, load current will not be in phase with load voltage and the diodes connected in antiparallel will allow the current to flow when the main thyristors are turned off. These diodes are called feedback diodes.

What are the advantages of freewheeling diodes in a controlled in a controlled rectifier?

Description : What are the advantages of freewheeling diodes in a controlled in a controlled rectifier?

Last Answer : a. Input power factor is improved. b. Load current waveform is improved and thus the load performance is better.

What is the function of freewheeling diodes in controlled rectifier?

Description : What is the function of freewheeling diodes in controlled rectifier?

Last Answer : It serves two process. a. It prevents the output voltage from becoming negative. b. The load current is transferred from the main thyristors to the freewheeling diode, thereby allowing all of its thyristors to regain their blocking states.

Mention the different types of diodes and one use of each.

Description : Mention the different types of diodes and one use of each.

Last Answer : a) Light Emitting Diode (LED): They are used in lighting, display units of electric and electronic devices. b) Zener diode: It is used in voltage stabilizers. c) Photodiode: It is used in light sensitive semiconductors. d) Laser diode: It is used in fiber optical fibre communications.

Vacuum tubes have been replaced by-----? A. Conductors B. Diodes C. Transistors (Answer) D. None of these

Description : Vacuum tubes have been replaced by-----? A. Conductors B. Diodes C. Transistors (Answer) D. None of these

Last Answer : C. Transistors (Answer)

Define semiconductor diodes.

Description : Define semiconductor diodes.

Last Answer : It is a device in which electric current can flow in one direction. It has 2 terminals P and N.

Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Description : Current limited power supplies can prevent damage to A) Rectifier diodes and power transformers. B) Pass transistors C) Other circuits in the system D) All of the above.

Last Answer : D) All of the above.

What type of logic family uses diodes in the input?

Description : What type of logic family uses diodes in the input?

Last Answer : DTL (diode transistor logic).

Specify the mechanism that SLDs lack that is required by laser diodes to achieve lasing.

Description : Specify the mechanism that SLDs lack that is required by laser diodes to achieve lasing.

Last Answer : SLDs have no built-in optical feedback mechanism.

Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Description : Why are LEDs preferred over laser diodes for low- and moderate-frequency analog applications?

Last Answer : LEDs require less complex circuitry than lasers.

For laser diodes, the term ____________________ is used instead of bandwidth.

Description : For laser diodes, the term ____________________ is used instead of bandwidth.

Last Answer : linewidth

Germanium diodes are used in AM detectors because ___

Description : Germanium diodes are used in AM detectors because ___

Last Answer : they minimize distortion from nonlinearit

The number of diodes used in bridge rectifier circuit is (a) 4 (b) 3 (c) 2 (d)

Description : The number of diodes used in bridge rectifier circuit is (a) 4 (b) 3 (c) 2 (d)

Last Answer : (a) 4

Pure semiconductors silicon and germanium are a) Extrinsic b) Intrinsic c) Insulator d) Diodes

Description : Pure semiconductors silicon and germanium are a) Extrinsic b) Intrinsic c) Insulator d) Diodes

Last Answer : b) Intrinsic

For which one of the following, ‘Diodes’ are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Description : For which one of the following, ‘Diodes’ are generally used for? (1) Rectification (2) Amplification (3) Modulation (4) Filtration

Last Answer : Rectification

A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Description : A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Last Answer : a single transistor

Draw the circuit diagram for AND and OR gates using diodes.

Description : Draw the circuit diagram for AND and OR gates using diodes.

Last Answer : Diode AND gate :Diode OR gate : 

The light emitted diodes consist of:

Description : The light emitted diodes consist of: (1) Si (2) GaAs (3) Ge (4) Diamond 

Last Answer : The light emitted diodes consist of: GaAs 

In a 3-phase voltage source inverter used for speed control of induction motor, anti-parallel diodes are used

Description : In a 3-phase voltage source inverter used for speed control of induction motor, anti-parallel diodes are used across each switching device. The main purpose of diodes is to:

Last Answer : In a 3-phase voltage source inverter used for speed control of induction motor, anti-parallel diodes are used across each switching device. The main purpose of diodes is to: Allow the motor to return energy during regeneration