An energy signal has G(f) = 10. Its energy density spectrum is: 

(1) 10 (2) 100 (3) 50 (4) 20

1 Answer

Answer :

An energy signal has G(f) = 10. Its energy density spectrum is: 100.

Related questions

Description :  An energy signal has G(f) = 20. Its energy density spectrum is A) 20 B) 100 C) 400 D) 800  

Last Answer : 400

Description : What is the spectrum of stereophonic FM signal? A. 19 to 38 kHz B. 30 to 53 kHz C. 59.5 to 74.5 kHz D. 88 to 108 MHz

Last Answer : B. 30 to 53 kHz

Description : The frequency spectrum of the stereophonic FM signal. A. 67 kHz B. 59.5 to 74.5 kHz C. 19 to 38 kHz D. 30 to 53 kHz

Last Answer : D. 30 to 53 kHz

Description : Fourier transform is a mathematical procedure to obtain the __________ of a given input signal. (A) spectrum (B) integration (C) difference (D) none of the above

Last Answer : (A) spectrum

Description : If the frequency spectrum of a signal has a bandwidth of500 Hz with thehighest frequency at 600 Hz, what shouldbe the samplingrate, according to the Nyquist theorem? A) 200 samples/s B) 500 samples/s C) 1000 samples/s D) 1200 samples/s

Last Answer : 1200 samples/s

Description : The display screen of a spectrum analyzer presents a graphic plot of what two signal characteristics?

Last Answer : Power and frequency.

Description : A spectrum analyzer is designed to display what signal characteristic?

Last Answer : Amplitude versus frequency (the frequency domain of the signals).

Description : The most critical and difficult part of receiving a direct – sequence spread spectrum signal is :

Last Answer : Synchronism

Description : To a conventional narrowband receiver, a spread spectrum signal appears to be

Last Answer : Noise

Description : The region of the electromagnetic spectrum immediately above the frequencies to which the human eye is sensitive is called: A. I r B. ultra-violet C. r f D. gamma ray

Last Answer : B. ultra-violet

Description : The most important reason for highly restricted use of penicillin G injections in present day therapeutics is its (a) Narrow spectrum of activity (b) Potential to cause hypersensitivity reaction (c) Short duration of action (d) Neurotoxicity

Last Answer : Ans: B

Description : Features of phenoxymethyl penicillin include the following: A. It is acid stable and orally active B. Its antibacterial spectrum is similar to that of benzyl penicillin C. It is used for less serious penicillin G sensitive infections D. All of the above are correct

Last Answer : D. All of the above are correct

Description : The most important reason for highly restricted use of penicillin G injections in present day therapeutics is its: A. Narrow spectrum of activity B. Potential to cause hypersensitivity reaction C. Short duration of action D. Neurotoxicity

Last Answer : B. Potential to cause hypersensitivity reaction

Description : For which word, the letter ‘G’ has been used in ‘2G Spectrum’? -Do You Know?

Last Answer : answer:

Description : The letter ‘G’ used in ‘2G Spectrum’ stands for (1) Governance (2) Global (3) Generation(4) Google

Last Answer : Generation

Description : The large signal bandwidth of an opamp is limited by its:  (1) Loop gain (2) Slew rate (3) Output impedance (4) Input frequency

Last Answer : The large signal bandwidth of an opamp is limited by its: Slew rate.

Description : Which of the following has the same unit as energy? (1) Power f(2) Density (3) Work (4) Force

Last Answer : (3) Work Explanation: The SI unit of work is the joule (J), which is defined as the work expended by a force of one Newton through a displacement of one metre.

Description : Suggest the diode material suitable to rectify 0.5V AC signal.

Last Answer : The diode material suitable to rectify 0.5V AC signal is silicon

Description :  If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be A) Large in amplitude B) Small in amplitude C) Distorted D) Distortion less

Last Answer :  If a signal band limited to fm is sampled at a rate less than 2fm, then the constructed signal will be Distorted 

Description : In a microwave test bench, why is the microwave signal amplitude modulated at 1 kHz?  (1) To increase the sensitivity of measurement (2) To transmit the signal to a far-off place (3) To study amplitude modulation (4) Because crystal detector fails at microwave frequencies

Last Answer : In a microwave test bench, why is the microwave signal amplitude modulated at 1 kHz?  Because crystal detector fails at microwave frequencies

Description : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be (1) mƒ (2) 3mƒ (3) 9mƒ (4) 27mƒ

Last Answer : An FM signal with modulation index mƒ is passed through a frequency tripler. The modulation index of the output signal will be 3mƒ

Description : Which of the following oscillators is used for generation of high frequency signal ? (a) RC phase shift oscillator (b) Blocking oscillator (c) Wein bridge oscillator (d) L-C oscillator 

Last Answer : LC oscillator is used for generation of high frequency signal. 

Description : Ideal transmission bandwidth of FM signal is

Last Answer : Ideal transmission bandwidth of FM signal is Infinite

Description : For FM signal, the frequency deviation

Last Answer : For FM signal, the frequency deviation Independent of the modulation frequency

Description : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly

Last Answer : A 4 GHz carrier is amplitude modulated by a low-pass signal of maximum cut off frequency 1 MHz. lf this signal is to be ideally sampled, the minimum sampling frequency should be nearly 4 Ghz

Description :  Minimum number of bits required to represent maximum value of given analogue signal with 0.1% accuracy is: a. 8 bits b. 9 bits c. 10 bits d. 12 bits

Last Answer : 10

Description : If a signal x(n)=x(–n), then it is called ____ signal. (1) Odd (2) Energy (3) Power (4) Even

Last Answer : If a signal x(n)=x(–n), then it is called even signal.

Description : The input to a coherent detector is DSB-SC signal plus noise. The noise at the detector output is:  (1) The in-phase component (2) The quadrature-component (3) Zero (4) The envelope

Last Answer : The input to a coherent detector is DSB-SC signal plus noise. The noise at the detector output is: Zero.

Last Answer : Which type of fading causes serious distortion of modulated signal: Selective fading.

Description : Differentiate between any five of the following: a) Thermoplastics and thermosetting plastics b) Lunar eclipse and solar eclipse c) Asteroid and meteorite d) Renewable and non-renewable energy resources e) Endothermic and exothermic reactions f) Star and planet g) Nuclear fission and nuclear fusion

Last Answer : a) Thermoplastics and thermosetting plastics: Thermoplastics: Thermoplastics can be repeatedly softened by heating and hardened by cooling.Thermoplastic molecules, which are linear or slightly branched, do ... or explode in midair. Remains of meteoroids that reach the surface are called meteorites.

Description : A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Last Answer : 0.06 V

Description : If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Last Answer : (C) 10 metres

Description : What satellite system parameter represents the quality of a satellite or an earth station receiver? A. Gain-to-Equivalent Noise Temperature Ratio (G/Te) B. Energy of Bit-to-Noise Density Ratio (Eb/No) C. Carrier-to-Noise Density Ratio (C/No) D. Bit energy

Last Answer : A. Gain-to-Equivalent Noise Temperature Ratio (G/Te)

Description : `CH_(3)-CH_(2)-CH_(2)-underset(OH)underset(|)(CH)-CH_(3) underset(-H_(2)O)overset(H^(o+))rarr[F] overset(Br_(2)//C Cl_(4))rarrC_(5)H_(10)Br_(2)(G)` Ho

Last Answer : `CH_(3)-CH_(2)-CH_(2)-underset(OH)underset(|)(CH)-CH_(3) underset(-H_(2)O)overset(H^(o+))rarr[F] ... (including all stereoisomers) A. 2 B. 6 C. 3 D. 5

Description : The coordinates of the points where 2x + 5y – 10 =0 meets y axis is e) (0 , 2) f) (0 , -2) g) (2 , 2) h) (-2 , -2)

Last Answer : e) (0 , 2)

Description : Mark the correct option relating to the loan on PLI policy (EA) e) Exceeding 3 years but not exceeding 5 years 60% f) Exceeding 5 years but not exceeding 10 years 80% g) Exceeding 10 years 90% h) All the above

Last Answer : h) All the above

Description : The first digital computer built with IC chips was known as e. IBM 7090 f. Apple – 1 g. IBM System / 360 h. VAX-10

Last Answer : g. IBM System / 360

Description : A project activity has several components as indicated below; S.  No. Activity Preceded by Duration (in  Weeks) 1 A - 8 2 B A 6 3 C A 12 4 D B 4 5 E D 5 6 F B 12 7 G E& F ... H 5 10 J I & G 6 d. Prepare a PERT chart, estimate the duration of the project and identify the  critical path.

Last Answer : PERT Diagram based on Activity on Arrow  .  E  D 5 G B 5 9 J, 6 A 6 F,12 I ,5 8 c 12 H 8 OR  PERT Diagram based on Activity on Node …………………….6 marks a. Critical Path: A-B-F-G-J …………………….1 mark  b. Estimated Project Duration: 41 weeks

Description : The first digital computer built with IC chips was known as e. IBM 7090 f. Apple – 1 g. IBM System / 360 h. VAX-10

Last Answer : g. IBM System / 360

Description : Opening WDV off the block of assets was Rs 15 lakh. During the year, asset was acquired under this block on 15 June 2017 amounting to rupees 10 lakh. One of the assets falling within the block was sold for rupees 5.5 ... . rupees 1.95 lakh f. rupees 2.5 lakh g. rupees 2.25 lakh h. Rs 1.45 lakh

Last Answer : e. rupees 1.95 lakh

Description : Operating pressure of power operated sprayer E. 1-7 kg/cm2 F. 10-20 kg/cm2+ G. 20-55 kg/cm2 H. >55 kg/cm2

Last Answer : G. 20-55 kg/cm2

Description : Operating pressure of the hand operated sprayer is E. 20-55 kg/cm2 F. 1-7 kg/cm2 G. 10-20 kg/cm2 H. >55 kg/cm2

Last Answer : F. 1-7 kg/cm2

Description : Length of cut for silage ranges from E. 2-4 cm F. 5-10 cm G. 15-20 cm H. 20-25 cm

Last Answer : E. 2-4 cm

Description : Normal life of detonators is e. 5 years f. 10 years g. 7 years * h. 6 years.

Last Answer : g. 7 years *

Description : The voltage regulation of an alternator having 0.75 leading p.f. load, no-load induced e.m.f. of 2400V and rated terminal voltage of 3000V is —————————————  A) 20% B) —20% C) 150 D) -26.7

Last Answer : -20

Description : Silver (atomic weight `108 g mol^(-1))` has a density of `10.5 g cm^(-3)`. The number of silver atoms on a surfaces of area `10^(-12) m^(2)` can be ex

Last Answer : Silver (atomic weight `108 g mol^(-1))` has a density of `10.5 g cm^(-3)`. The number of silver atoms on a ... `Y xx 10^(-x)`, The value of `x` is .

Description : Battery acid `(H_(2)SO_(4))` has density 1.285 g `cm^(-3)` , 10.0 `cm^(3)` of this acid is diluted to 1L . 25.0 `cm^(3)` of this diluted solution requ

Last Answer : Battery acid `(H_(2)SO_(4))` has density 1.285 g `cm^(-3)` , 10.0 `cm^(3)` of this acid is diluted ... the battery acid is : A. 98 B. 38 C. 19 D. 49

Description : 40000 litre of oil of density 0.9 g cc is pumped from an oil tanker ship into a storage tank at 10 m higher level than the ship in half an hour.

Last Answer : 40000 litre of oil of density 0.9 g cc is pumped from an oil tanker ship into a storage tank at 10 ... an hour. What should be the power of the pump?

Description : Spectral density expresses:  (1) Average voltage (2) Average current (3) Average power in a waveform as a function of frequency (4) None of these

Last Answer : Spectral density expreses Average power in a waveform as a function of frequency.

Description : Sodium vapour lamps glow with yellow colour. This is due to - (1) sublimation of sodium to emit yellow colour (2) the emission of excess energy absorbed by sodium atoms, in the yellow region of the ... (3) the low ionisation energy of sodium (4) its ability to absorb all other colours except yellow

Last Answer : (2) the emission of excess energy absorbed by sodium atoms, in the yellow region of the spectrum Explanation: Sodium Vapour Lamps glow with yellow colour due to the emission of excess energy absorbed by sodium atoms, in the yellow region of the spectrum.