A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5

A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5
by

1 Answer

Answer :

a.9.24,9.24
by

Related questions

A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7

Description : A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7

Last Answer : c.8,7

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5

Description : For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5

Last Answer : a.11.6, 7

Center point of circle a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2 b.[x1-x2]/2; [y1-y2]/2; [z1-z2]/2 c.[x1-x2]; [y1-y2]; [z1-z2] d.[x2-x1]; [y2-y1]; [z2-z1]

Description : Center point of circle a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2 b.[x1-x2]/2; [y1-y2]/2; [z1-z2]/2 c.[x1-x2]; [y1-y2]; [z1-z2] d.[x2-x1]; [y2-y1]; [z2-z1]

Last Answer : a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2

For Q 51, find radius of circle a.3 b.3.6 c.4 d.3.5

Description : For Q 51, find radius of circle a.3 b.3.6 c.4 d.3.5

Last Answer : b.3.6

A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)

Description : A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)

Last Answer : c.(10, 10)

A line AB with end point A (2,3) & B (7,8) is to be rotated about origin by 300 inclockwise direction. Determine the coordinates of end points S of rotated line. a.(3.232, 2.598) b.(5.232, 3.598) c.(3.232, 1.298) d.(3.232, 1.598)

Description : A line AB with end point A (2,3) & B (7,8) is to be rotated about origin by 300 inclockwise direction. Determine the coordinates of end points S of rotated line. a.(3.232, 2.598) b.(5.232, 3.598) c.(3.232, 1.298) d.(3.232, 1.598)

Last Answer : d.(3.232, 1.598)

In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Description : In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Last Answer : a.(10, 10)

Synthetic curve pass through defined data points and thus can be represented by a.polynomial equations b.exponential equations c.partial differential equations d.differential equations

Description : Synthetic curve pass through defined data points and thus can be represented by a.polynomial equations b.exponential equations c.partial differential equations d.differential equations

Last Answer : a.polynomial equations

To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Description : To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Last Answer : b.Center coordinates and redraw the figure in new location

Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Description : Positive values for the rotation angle θ defines a.Counter clockwise rotations about the end points b.Counter clockwise translation about the pivot point c.Counter clockwise rotations about the pivot point d.Negative direction

Last Answer : c.Counter clockwise rotations about the pivot point

Scaling of a polygon is done by computing a.The product of (x, y) of each vertex b.(x, y) of end points c.Center coordinates d.Only a

Description : Scaling of a polygon is done by computing a.The product of (x, y) of each vertex b.(x, y) of end points c.Center coordinates d.Only a

Last Answer : d.Only a

An ellipse can also be rotated about its center coordinates by rotating a.End points b.Major and minor axes c.Only a d.None

Description : An ellipse can also be rotated about its center coordinates by rotating a.End points b.Major and minor axes c.Only a d.None

Last Answer : b.Major and minor axes

To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following? a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following? a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Last Answer : b.Hermite Cubic Spline Curve

To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above

Last Answer : b.Hermite Cubic Spline Curve

In the given figure, OACB is a quadrant of a circle of radius 7 cm. The perimeter of the quadrant is (a) 11 cm (b) 18 cm (c) 25 cm (d) 36 cm

Description : In the given figure, OACB is a quadrant of a circle of radius 7 cm. The perimeter of the quadrant is (a) 11 cm (b) 18 cm (c) 25 cm (d) 36 cm

Last Answer : (c) 25 cm

STL file format is represented by interaction of ______ a.lines and hexagons b.lines and rectangles c.lines and triangles d.lines and circles

Description : STL file format is represented by interaction of ______ a.lines and hexagons b.lines and rectangles c.lines and triangles d.lines and circles

Last Answer : c.lines and triangles

The data representation of CSG objects is represented by a.a binary tree b.a boolean operation c.a primitive d.none of the above

Description : The data representation of CSG objects is represented by a.a binary tree b.a boolean operation c.a primitive d.none of the above

Last Answer : a.a binary tree

Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Description : Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Last Answer : d.homogenous co-ordinates

In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Last Answer : b.(10, 5)

Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such that atany position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Description : Mathematically, the ellipse is a curve generated by a point moving in space such thatat any position the sum of its distances from two fixed points (foci) is constant and equal to a.the major diameter b.the minor diameter c.semi major diameter d.semi-minor diameter

Last Answer : a.the major diameter

Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Last Answer : c.[3.75 4.75 6.75]

Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k

Description : Find the tangent vector of line having end points P1(3,5,8) and P2 (6,4,3) a.3i+j-5k b.3i-j-5k c.3i-j+5k d.-3i-j-5k

Last Answer : b.3i-j-5k

Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]

Description : Write parametric equation of line having end points P1(3,5,8) and P2 (6,4,3). a.[3 5 8]+u[3 -1 -5] b.[3 5 8]+u[3 1 5] c.[3 8 5]+u[3 -1 -5] d.[3 5 8]+u[-3 1 5]

Last Answer : a.[3 5 8]+u[3 -1 -5]

The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Description : The machine tool, in which calculation and setting of the operating conditions like depth ofcut, feed, speed are done during the machining by the control system itself, is called a.Computer Numerical Control System b.Direct Numerical Control System c.Machining Center System d.Adaptive Control System

Last Answer : d.Adaptive Control System

In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Description : In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Last Answer : b.G41

The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Description : The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Last Answer : b.Tool length offset H

Parametric equation for circle a.X=x+Rcosu; Y=y+Rsinu; Z=z b.X=Rcosu; Y=Rsinu; Z=z c.X=x+Rsinu; Y=y+Rcosu; Z=z d.X=Rsinu; Y=y+Rcosu; Z=z

Description : Parametric equation for circle a.X=x+Rcosu; Y=y+Rsinu; Z=z b.X=Rcosu; Y=Rsinu; Z=z c.X=x+Rsinu; Y=y+Rcosu; Z=z d.X=Rsinu; Y=y+Rcosu; Z=z

Last Answer : a.X=x+Rcosu; Y=y+Rsinu; Z=z

Which of the following is not an analytical entity? a.Line b.Circle c.Spline d.Parabola

Description : Which of the following is not an analytical entity? a.Line b.Circle c.Spline d.Parabola

Last Answer : c.Spline

In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Description : In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Last Answer : d.Circle

Feed is measured in units of a.length/revolution b.degree/revolution c.length d.velocity

Description : Feed is measured in units of a.length/revolution b.degree/revolution c.length d.velocity

Last Answer : a.length/revolution

If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Last Answer : b.FALSE

Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Description : Which of the following is used as base material in Selective laser sintering (SLS)? a.Photopolymer b.Thermoplastics, Metal powders c.Titanium alloys d.Various materials

Last Answer : b.Thermoplastics, Metal powders

Which of the following is used as base material in Electron Beam Melting (EBM) process? a.Titanium alloys b.Photopolymer c.Various materials d.Paper

Description : Which of the following is used as base material in Electron Beam Melting (EBM) process? a.Titanium alloys b.Photopolymer c.Various materials d.Paper

Last Answer : a.Titanium alloys

The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Description : The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Last Answer : c.boundary condition

A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Last Answer : c.High Production

Which of the following module of FEA is used to determine natural frequency? a.Static analysis b.Thermal analysis c.Modal analysis d.All of the above

Description : Which of the following module of FEA is used to determine natural frequency? a.Static analysis b.Thermal analysis c.Modal analysis d.All of the above

Last Answer : c.Modal analysis

The number of non-coincidental points required to define the simplest surface are a.4 b.3 c.2 d.5

Description : The number of non-coincidental points required to define the simplest surface are a.4 b.3 c.2 d.5

Last Answer : b.3

How many nodes are there in a 3-D brick element? a.3 b.6 c.8 d.9

Description : How many nodes are there in a 3-D brick element? a.3 b.6 c.8 d.9

Last Answer : c.8

Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Description : Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Last Answer : d.6

To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

Description : To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

Last Answer : a.Rotation angle θ

The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Description : The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Last Answer : c.global coordinate system

The degree of the curve is independent of the number of control points in _____ a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola

Description : The degree of the curve is independent of the number of control points in _____ a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola

Last Answer : c.B-spline curve

In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Description : In Beizer Curve, the flexibility of the shape would increase with _______ of the polygon. a.decrease in the number of vertices b.increase in the number of vertices c.decrease in control points d.none of the above

Last Answer : b.increase in the number of vertices

In Beizer Curve, the curve follows __________ a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Description : In Beizer Curve, the curve follows __________ a.the control points b.the shape of the defining polygon c.the defining points d.none of the above

Last Answer : b.the shape of the defining polygon

When a smooth curve is approximated through the data points, then the curve is knownas a.approximation curve b.pitch curve c.data curve d.interpolant curve

Description : When a smooth curve is approximated through the data points, then the curve is knownas a.approximation curve b.pitch curve c.data curve d.interpolant curve

Last Answer : a.approximation curve

When the curve passes through all the data points, then the curve is known as a.approximation curve b.pitch curve c.data curve d.interpolant curve

Description : When the curve passes through all the data points, then the curve is known as a.approximation curve b.pitch curve c.data curve d.interpolant curve

Last Answer : d.interpolant curve

The degree of the curve is independent of the number of control points in . a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola

Description : The degree of the curve is independent of the number of control points in . a.Hermite cubic spline curve b.Bezier curve c.B-spline curve d.Hyperbola

Last Answer : c.B-spline curve