Which rule implement for axes Nomenclature? a.Left-hand rule b.Right-Hand Rule c.Thumb Rule d.None of the above

1 Answer

Answer :

b.Right-Hand Rule

Related questions

Description : Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above

Last Answer : b.Parallel

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

Description : Coordinate of â- ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new ... in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)

Last Answer : a.(4.268, 6.732)

Description : An ellipse can also be rotated about its center coordinates by rotating a.End points b.Major and minor axes c.Only a d.None

Last Answer : b.Major and minor axes

Description : In Fleming's left hand rule, thumb shows direction of A. current B. field C. motion D. charge

Last Answer : motion

Description : In STL files Euler’s rule for solids can be written as a.No. of faces †No. of edges + No. of vertices = 3 x No. of bodies b.No. of faces †No. of edges + No. of vertices = No. of bodies c.No. of ... = 2 x No. of bodies d.No. of faces †No. of edges + No. of vertices = 4 x No. of bodies

Last Answer : c.No. of faces – No. of edges + No. of vertices = 2 x No. of bodies

Description : State ‘Cork screw rule’ and ‘Right hand thumb rule’.  

Last Answer : Cork screw rule Direction of magnetic lines of force around a straight current carrying conductor can be determined by these rules. Cork screw rule' says that, the direction of magnetic ... or encircling fingers must be in the direction of magnetic lines of force around the conductor. 

Description : RIGHT HAND THUMB RULE

Last Answer : “By holding a current carrying straight conductor in your right hand then thumb points towards the direction of current and curled fingers around the conductor will give the direction of magnetic field.”

Description : In the right-hand rule for propagation, the thumb points in the direction of the E field and the forefinger points in the direction of the H field. In what direction does the middle finger point?

Last Answer : Direction of wave propagation.

Last Answer : While applying Fleming's right-hand rule to And the direction of induced e.m.f., the thumb points towards direction of motion of conductor, if forefinger points along the lines of flux.

Description : The process of copying data from a memory location is called a.reading b.writing c.controlling d.hand shaking

Last Answer : a.reading

Description : The process of putting data into a storage location is called a.reading b.writing c.controlling d.hand shaking

Last Answer : b.writing

Description : The rule of thumb is that a right hander should wear a watch on the left arm and vice versa. Where did that rule come from?

Last Answer : It comes from being able to look at your watch while writting so you don't loose track of time.

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

Description : In CNC machining tool radius compensation turning the left mode ON programming contourdone by a.G40 b.G41 c.G42 d.G43

Last Answer : b.G41

Description : Choose the right sequence for Production Flow Analysis a.PFA Chart - Data Collection - Sortation of process plans b.Data collection - PFA chart - Sortation of process plans c.Sortation of process plans - Data collection - PFA chart d.Data collection - Sortation of process plans - PFA chart

Last Answer : d.Data collection - Sortation of process plans - PFA chart

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

Description : As a rule of thumb ladies go fisrt when you are going upstairs, right? what about when you are going downstairs?

Last Answer : haha i love how all the guys are thinking about etiquette with ladies. i have never really analyzed this stuff myself. but yeah, what you said makes sense. you should go before her (while going downstairs) so you can break the fall. ouch.

Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Last Answer : b.Teach pendant is used for manual teaching.

Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None

Last Answer : c.High Production

Description : --------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed

Description : Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : b.Programmable

Description : Which automation is suited for high production quantities a.Flexible b.Programmable c.Fixed d.All of above

Last Answer : c.Fixed

Description : A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Last Answer : c.Higher-level strategies

Description : Use computers for storage and retrieval of the data for the process plans are? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies

Last Answer : a.Lower-level strategies

Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Last Answer : c.Additional holes, teeth and forming

Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : d.Plane surface machining

Description : Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : c.Rotational machining

Description : Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : b.Main shape

Description : Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : a.Part class

Description : Secondary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : c.Production operation type & sequence

Description : Supplementary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : b.Manufacturing attributes

Description : Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : a.Design attributes

Description : The last four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Last Answer : b.Secondary code

Description : The middle four digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Last Answer : c.Supplementary code

Description : The first five digits of the Opitz classification system are ______ a.Form code b.Secondary code c.Supplementary code d.Stationary code

Last Answer : a.Form code

Description : Chain type coding structure is also known as________ a.Poly code b.Mono code c.Hybrid code d.Miscellaneous code

Last Answer : a.Poly code

Description : Which of the following is not the method of part family formation a.Visual inspection method b.Automatic product sorting c.Parts classification & coding d.Production flow analysis

Last Answer : b.Automatic product sorting

Description : In ship manufacturing, the type of layout preferred is a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : c.Fixed-position layout

Description : The following type of layout is preferred for low volume production of non-standard products a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : b.Process layout

Description : The following type of layout is preferred to manufacture a standard product in large quantity a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

Description : If all the processing equipment and machines are arranged according to the sequence ofoperations of a product the layout is known as a.Product layout b.Process layout c.Fixed-position layout d.GT layout

Last Answer : a.Product layout

Description : Which system uses computers at higher level strategies a.Variant CAPP b.Generative CAPP c.Hybrid CAPP d.All of the above

Last Answer : b.Generative CAPP

Description : Which system uses computers at lower-level strategies a.Variant CAPP b.Generative CAPP c.Hybrid CAPP d.All of the above

Last Answer : a.Variant CAPP

Description : From the following in which type of GT code tree-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : c.Mono code

Description : From the following in which type of GT code chain-type structure is used? a.Poly code b.Hybrid code c.Mono code d.None of the above

Last Answer : a.Poly code

Description : Which layout is mostly used for the batch type of production? a.Product layout b.Process layout c.In line layout d.None of the above

Last Answer : b.Process layout

Description : The following is basically a material flow simplification technique a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Last Answer : c.Cell formation using Production Flow Analysis

Description : Which of the following technique of grouping does not consider the design and shape aspect? a.A simple and visual method of cell design b.Family formation by classification and codification c.Cell formation using Production Flow Analysis d.All of the above

Last Answer : c.Cell formation using Production Flow Analysis

Description : In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Last Answer : b.External shape and external shape elements